1992 Eagle Summit Electrical Parts

This table covers the alternators that charge the battery and run the electrical load. Typical signs include dim lights at idle, a battery lamp, or a growl from the charging pulley. Load-test the battery and inspect the belt and grounds — a bad ground mimics a failed alternator. Read more

24 Alternator / Generator parts for the 1992 Eagle Summit come from 8 brands — REMY, TERREPOWER, PURE ENERGY and 5 other brands. The "Popular" part is ACDELCO 3351166.

The New section lists 6 options from WAI GLOBAL, ACDELCO, REMY and 1 other brand — brand-new units rather than rebuilt ones. ACDELCO 3351166 is listed in this group.

The Remanufactured section lists 12 options from PURE ENERGY, REMY, TERREPOWER and 3 other brands — factory-rebuilt units with new wear components. BECK/ARNLEY 1860389 is listed in this group.

6 further parts sit outside the graded sections, with the same engine-level match.

This table covers the bearings in the alternator housing. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

7 Alternator / Generator End Bearing parts are listed for the 1992 Eagle Summit, from WJB / INMOTION PARTS, NATIONAL, BCA and 1 other brand. WJB / INMOTION PARTS RB63032RS carries the "Popular" badge. 6 parts fit every engine; the other 1 is engine-specific.

In the Economy grade, WJB / INMOTION PARTS supplies 2 parts: the catalog's value-priced group. A representative part number is WJB / INMOTION PARTS RB63032RS.

The Standard Replacement section lists 4 options from NATIONAL and BCA — built to original-equipment specification. NATIONAL 303CC is listed in this group.

1 ungrouped part is not assigned to a grade, with the same engine-level match.

Listed part numbers: WJB / INMOTION PARTS RB63032RS, WJB / INMOTION PARTS RB63022RS and NATIONAL 303CC, plus the other parts above.

This table covers the batteries listed by group size and specification. Typical signs include slow cranking, a battery lamp, or a no-start after the vehicle sat overnight. Confirm group size and terminal layout in the notes. Clean the posts and the ground before condemning the battery. Read more

11 Battery parts are listed for the 1992 Eagle Summit, from DEKA, FVP, EXIDE and 1 other brand. DEKA 9A78DT carries the "Popular" badge.

The AGM (Extended Life) section lists 5 options from DEKA, FVP and EXIDE — grouped under the catalog's "AGM (Extended Life)" designation — the notes column spells out what sets them apart. DEKA 9A78DT is listed in this group.

The Performance AGM (Extended Life + Increased Power) section lists 1 option from FULLRIVER — grouped under the catalog's "Performance AGM (Extended Life + Increased Power)" designation — the notes column spells out what sets them apart. FULLRIVER FT75025 is listed in this group.

5 ungrouped parts are not assigned to a grade, with the same engine-level match.

This table covers the positive and ground cables that run from the battery. Typical signs include a stretched or frayed cable, or a control that no longer reaches the end of its travel. Route the new cable through the same clips. A kinked cable binds and fails early. Read more

12 Battery Cable parts for the 1992 Eagle Summit come from 3 brands — DEKA, STANDARD MOTOR PRODUCTS and ACDELCO. The "Popular" part is ACDELCO 4ST40. 1 part fits every engine; the other 11 are engine-specific.

This table covers the terminals and clamps that connect cables to the battery posts. Read more

DEKA supplies both parts for the 1992 Eagle Summit. All of them fit every engine offered in the 1992 Summit.

This group includes DEKA 00350 and DEKA 01056.

This table covers the engine-control modules that run fuel, spark and emissions. Read more

9 Engine Control Module (ECM Computer) parts for the 1992 Eagle Summit come from 2 brands — CARDONE and BSE.

Part numbers include BSE EM5774, BSE EM905 and BSE EM5778, among others listed above.

This table covers the flasher units that blink the turn signals and hazards. Read more

5 Flasher parts are listed for the 1992 Eagle Summit, from STANDARD MOTOR PRODUCTS, WELLS, BUSSMANN and 1 other brand. WELLS 1R1453 carries the "Popular" badge. All of them fit every engine offered in the 1992 Summit.

The Standard Replacement section: 1 option from WELLS. WELLS 1R1453 is listed in this group.

The Super Heavy-Duty Electronic section lists 1 option from BUSSMANN — grouped under the catalog's "Super Heavy-Duty Electronic" designation — the notes column spells out what sets them apart. BUSSMANN 232 is listed in this group.

3 ungrouped parts are not assigned to a grade, with the same engine-level match.

Part numbers include WELLS 1R1453, BUSSMANN 232 and STANDARD MOTOR PRODUCTS EFL8T, among others listed above.

This table covers the replacement fuses for this vehicle's fuse boxes. Typical signs include one circuit dead while its neighbor still works, or a fuse that blows again as soon as you replace it. Match amperage and fuse type. A repeat blow means a short — find it before the next fuse. Read more

24 Fuse parts are listed for the 1992 Eagle Summit, from BUSSMANN and LITTELFUSE. BUSSMANN ATC10 carries the "Popular" badge. All of them fit every engine offered in the 1992 Summit.

The 10 Amp section lists 3 options from BUSSMANN and LITTELFUSE — grouped under the catalog's "10 Amp" designation — the notes column spells out what sets them apart. BUSSMANN ATC10 is listed in this group.

In the 15 Amp grade, BUSSMANN and LITTELFUSE supply 3 parts: grouped under the catalog's "15 Amp" designation — the notes column spells out what sets them apart. A representative part number is BUSSMANN ATC15.

In the 20 Amp grade, BUSSMANN and LITTELFUSE supply 5 parts: grouped under the catalog's "20 Amp" designation — the notes column spells out what sets them apart. A representative part number is BUSSMANN ATC20.

The 25 Amp section lists 3 options from BUSSMANN and LITTELFUSE — grouped under the catalog's "25 Amp" designation — the notes column spells out what sets them apart. BUSSMANN ATC25 is listed in this group.

The 30 Amp section lists 4 options from BUSSMANN and LITTELFUSE — grouped under the catalog's "30 Amp" designation — the notes column spells out what sets them apart. BUSSMANN FLM30 is listed in this group.

In the 40 Amp grade, BUSSMANN and LITTELFUSE supply 2 parts: grouped under the catalog's "40 Amp" designation — the notes column spells out what sets them apart. A representative part number is BUSSMANN FLF40.

In the 60 Amp grade, BUSSMANN and LITTELFUSE supply 2 parts: grouped under the catalog's "60 Amp" designation — the notes column spells out what sets them apart. A representative part number is BUSSMANN FLM60.

In the 80 Amp grade, BUSSMANN and LITTELFUSE supply 2 parts: grouped under the catalog's "80 Amp" designation — the notes column spells out what sets them apart. A representative part number is BUSSMANN FLM80.

This table covers the horns mounted in the front of the vehicle. Read more

6 Horn parts are listed for the 1992 Eagle Summit, from STANDARD MOTOR PRODUCTS and ACDELCO. STANDARD MOTOR PRODUCTS HN17T carries the "Popular" badge. All of them fit every engine offered in the 1992 Summit.

Part numbers include STANDARD MOTOR PRODUCTS HN17T, STANDARD MOTOR PRODUCTS HN18 and ACDELCO E1905E, among others listed above.

This table covers the speed sensors on the transmission, transfer case or ABS ring. Typical signs include a dead speedometer, harsh transmission shifts, or a code for vehicle speed. Inspect the tone wheel and the connector before replacing the sensor. Read more

6 Speed Sensor parts are listed for the 1992 Eagle Summit, from SKP, GPD and STANDARD MOTOR PRODUCTS. SKP SK917602 carries the "Popular" badge. All of them fit every engine offered in the 1992 Summit.

Economy: 5 parts, from SKP, GPD and STANDARD MOTOR PRODUCTS. A representative part number is SKP SK917602.

The Standard Replacement section: 1 option from STANDARD MOTOR PRODUCTS. STANDARD MOTOR PRODUCTS SC103 is listed in this group.

Part numbers include SKP SK917602, SKP SK917601 and GPD 1815486, among others listed above.

This table covers the Starter bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

One part is listed for the 1992 Eagle Summit — STANDARD MOTOR PRODUCTS X5414.

This table covers the starter drives that engage the flywheel ring gear. Read more

4 Starter Drive parts are listed for the 1992 Eagle Summit, from STANDARD MOTOR PRODUCTS, ACDELCO and WELLS.

Part numbers include ACDELCO C2009, STANDARD MOTOR PRODUCTS SDN197 and STANDARD MOTOR PRODUCTS SDN204, among others listed above.

This table covers the starter motors that crank the engine. Typical signs include no motion, a squeal, or a motor that only runs on one speed. Confirm power, ground and the control module before replacing the motor. Read more

43 Starter Motor parts for the 1992 Eagle Summit come from 8 brands — REMY, TERREPOWER, PURE ENERGY and 5 other brands. The "Popular" part is ACDELCO 3371145. New and Remanufactured are all represented, and Remanufactured alone accounts for 24 parts.

This table covers the Starter solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

2 Starter Solenoid parts for the 1992 Eagle Summit come from 2 brands — STANDARD MOTOR PRODUCTS and WELLS. 1 part fits every engine; the other 1 is engine-specific.

This group includes STANDARD MOTOR PRODUCTS SS282 and WELLS 1M1071.

This table covers the regulators that control alternator output voltage. Read more

4 Voltage Regulator parts are listed for the 1992 Eagle Summit, from STANDARD MOTOR PRODUCTS, ACDELCO and BOSCH. 3 parts fit every engine; the other 1 is engine-specific.

This group includes ACDELCO C648, BOSCH 1986AE0081 and STANDARD MOTOR PRODUCTS VR403 and the remaining parts above.