79 Engine parts are listed for the 1970 Excalibur Phaeton, in 14 part types, covering the 5.7L 350cid V8 engine. Each one has a brand, a manufacturer part number and notes that say where it fits.
On the 1970 Excalibur Phaeton, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. 31 parts of the 79 listed are Connecting Rod Bearing (11 parts), Crankshaft Seal (11 parts) and Cylinder Head Bolt (9 parts). The other 11 part types cover the remaining 48 parts.
Every part on this page is matched to the 5.7L 350cid V8 — the only engine offered in the 1970 Excalibur Phaeton.
The most listed brands for 1970 Excalibur Phaeton engine parts are KING ENGINE BEARINGS (18 parts), FEL-PRO (14 parts) and ARP (13 parts), plus 8 more brands. Quality grades include High Performance and Standard Replacement.
17 parts on this 1970 Excalibur Phaeton page carry a "Popular" badge — the source catalog's flag for options frequently chosen for this vehicle — including KING ENGINE BEARINGS CR807XPN (Connecting Rod Bearing) and APEX ACS3022 (Conversion / Lower Gasket Set). Click any part number to see every vehicle that part fits.
Bolt Kit
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ARP | 5349701 | 🇺🇸 US 🇨🇦 CA | Black Oxide12 Point Bolt Head | View on Amazon |
| ARP | 5349801 | 🇺🇸 US 🇨🇦 CA | Hex Bolt Head | View on Amazon |
| ARP | 5349601 | 🇺🇸 US 🇨🇦 CA | Stainless Steel Hex Bolt Head | View on Amazon |
| ARP | 5349501 | 🇺🇸 US 🇨🇦 CA | Stainless Steel12 Point Bolt Head | View on Amazon |
This table covers the Bolt kits.
4 Bolt Kit parts for the 1970 Excalibur Phaeton come from ARP.
This group includes ARP 5349701, ARP 5349801 and ARP 5349601 and the remaining parts above.
Camshaft Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ARP | 1341001 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the Camshaft bolts.
One part is listed for the 1970 Excalibur Phaeton — ARP 1341001.
Connecting Rod Bearing
High Performance
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| KING ENGINE BEARINGS Popular | CR807XPN | 🇺🇸 US | SetRace bearings, Trimetal [Pmax Black] | View on Amazon |
| KING ENGINE BEARINGS | CR807HPND | 🇺🇸 US | SetRace bearings, Bimetal (Alecular) | View on Amazon |
| KING ENGINE BEARINGS | CR807HPNDX | 🇺🇸 US | SetRace bearings, Bimetal (Alecular) | View on Amazon |
| KING ENGINE BEARINGS | CR807XPNX | 🇺🇸 US | Race bearings, Trimetal [Pmax Black]Set | View on Amazon |
| KING ENGINE BEARINGS | CR807XPND | 🇺🇸 US | Race bearings, Trimetal [Pmax Black]Set | View on Amazon |
| KING ENGINE BEARINGS | CR807XPNDX | 🇺🇸 US | Race bearings, Trimetal [Pmax Black]Set | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| KING ENGINE BEARINGS Popular | CR807SI | 🇺🇸 US | SetBimetal (Aluminum Silicon Base) | View on Amazon |
| KING ENGINE BEARINGS Popular | CR807SIX | 🇺🇸 US | Setbimetal (aluminum silicon base) | View on Amazon |
| KING ENGINE BEARINGS | CR865SI | 🇺🇸 US | SetBimetal (Aluminum Silicon Base) | View on Amazon |
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| KING ENGINE BEARINGS | CR807HPNX | 🇺🇸 US | Race bearings, Bimetal (Alecular)Set | View on Amazon |
| KING ENGINE BEARINGS | CR807HPN | 🇺🇸 US | SetRace bearings, Bimetal (Alecular) | View on Amazon |
This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.
11 Connecting Rod Bearing parts for the 1970 Excalibur Phaeton come from KING ENGINE BEARINGS. The "Popular" part is KING ENGINE BEARINGS CR807XPN.
The High Performance section lists 6 options from KING ENGINE BEARINGS — engineered beyond original-equipment specification. KING ENGINE BEARINGS CR807XPN is listed in this group.
In the Standard Replacement grade, KING ENGINE BEARINGS supplies 3 parts: built to original-equipment specification. A representative part number is KING ENGINE BEARINGS CR807SI.
2 further parts sit outside the graded sections, with the same engine-level match.
Connecting Rod Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ARP | 1346003 | 🇺🇸 US 🇨🇦 CA | Large Journal 3/8" | View on Amazon |
This table covers the Connecting Rod bolts.
One part is listed for the 1970 Excalibur Phaeton — ARP 1346003.
Conversion / Lower Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| APEX Popular | ACS3022 | 🇺🇸 US | View on Amazon | |
| ENGINE PRO | 3777332 | 🇺🇸 US | View on Amazon | |
| FEL-PRO | CS77332 | 🇺🇸 US | Multi-PieceRear Main Seal Not Included | View on Amazon |
| MAHLE / CLEVITE | CS1178 | 🇺🇸 US | Includes 2 Piece Rear Main Seal | View on Amazon |
| VICTOR REINZ | 081005601 | 🇺🇸 US | with 2 Piece Rear Main Seal | View on Amazon |
This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
5 Conversion / Lower Gasket Set parts for the 1970 Excalibur Phaeton come from 5 brands — APEX, ENGINE PRO, FEL-PRO and 2 other brands. The "Popular" part is APEX ACS3022.
This group includes APEX ACS3022, ENGINE PRO 3777332 and FEL-PRO CS77332 and the remaining parts above.
Crankshaft Main Bearing
High Performance
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| KING ENGINE BEARINGS Popular | MB557XP | 🇺🇸 US | SetRace bearings, Trimetal [Pmax Black] | View on Amazon |
| KING ENGINE BEARINGS | MB557HP | 🇺🇸 US | alecular (racing line)Set | View on Amazon |
| KING ENGINE BEARINGS | MB557HPX | 🇺🇸 US | alecular (racing line)Set | View on Amazon |
| KING ENGINE BEARINGS | MB557XPX | 🇺🇸 US | Race bearings, Trimetal [Pmax Black]Set | View on Amazon |
| KING ENGINE BEARINGS | MB557XPC | 🇺🇸 US | pmaxkote (racing line), polymer coatedSet | View on Amazon |
| KING ENGINE BEARINGS | MB557XPCX | 🇺🇸 US | pmaxkote (racing line), polymer coatedSet | View on Amazon |
| MAHLE / CLEVITE | MS1110H | 🇺🇸 US 🇨🇦 CA | Contains a Spacer used with Bearing In Position Number 5, Engine Using 283 CrankshaftSet | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| KING ENGINE BEARINGS Popular | MB557SI | 🇺🇸 US | SetBimetal (Aluminum Silicon Base) | View on Amazon |
This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.
8 Crankshaft Main Bearing parts are listed for the 1970 Excalibur Phaeton, from KING ENGINE BEARINGS and MAHLE / CLEVITE. KING ENGINE BEARINGS MB557XP carries the "Popular" badge.
High Performance: 7 parts, from KING ENGINE BEARINGS and MAHLE / CLEVITE. A representative part number is KING ENGINE BEARINGS MB557XP.
The Standard Replacement section: 1 option from KING ENGINE BEARINGS. KING ENGINE BEARINGS MB557SI is listed in this group.
Part numbers include KING ENGINE BEARINGS MB557XP, KING ENGINE BEARINGS MB557HP and KING ENGINE BEARINGS MB557HPX, among others listed above.
Crankshaft Main Bearing Cap Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ARP | 1345401 | 🇺🇸 US 🇨🇦 CA | Stud2-Bolt | View on Amazon |
| ARP | 1345601 | 🇺🇸 US 🇨🇦 CA | Stud4-Bolt | View on Amazon |
This table covers the Crankshaft Main Bearing Cap bolts.
2 Crankshaft Main Bearing Cap Bolt parts for the 1970 Excalibur Phaeton come from ARP.
Part numbers include ARP 1345401 and ARP 1345601.
Crankshaft Repair Sleeve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| NATIONAL | 99176 | 🇺🇸 US | Front0.563 IN Width | View on Amazon |
| WJB / INMOTION PARTS | WS99176 | 🇺🇸 US | Installation Depth: 0.81299999999999994 InShaft Diameter Minimum (In): 1.7609999999999999 In | View on Amazon |
This table covers the sleeves used to restore a grooved crankshaft seal surface.
2 Crankshaft Repair Sleeve parts are listed for the 1970 Excalibur Phaeton, from NATIONAL and WJB / INMOTION PARTS.
Listed part numbers: NATIONAL 99176 and WJB / INMOTION PARTS WS99176.
Crankshaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Popular | BS40013 | 🇺🇸 US | Rubber | View on Amazon |
| FEL-PRO Popular | BS118291 | 🇺🇸 US | Rubber | View on Amazon |
| NATIONAL Popular | 9845 | 🇺🇸 US | Front0.375 IN Width | View on Amazon |
| APEX | ABS322 | 🇺🇸 US | Rear | View on Amazon |
| BCA | NS9845 | 🇺🇸 US | Front0.375 IN Width | View on Amazon |
| NATIONAL | 5092 | 🇺🇸 US | RearSplit Type | View on Amazon |
| SCHAEFFLER | SS2784 | 🇺🇸 US | Front9.53 mm Width | View on Amazon |
| VICTOR REINZ | 191006901 | 🇺🇸 US | Set | View on Amazon |
| VICTOR REINZ | 191011601 | 🇺🇸 US | SetRubber | View on Amazon |
| WJB / INMOTION PARTS | WS5092 | 🇺🇸 US | Housing Bore: 3 InMaterial: Silicone | View on Amazon |
| WJB / INMOTION PARTS | WS9845 | 🇺🇸 US | Housing Bore: 2.4089999999999998 InInside Diameter: 1.7629999999999999 In | View on Amazon |
This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
11 Crankshaft Seal parts are listed for the 1970 Excalibur Phaeton, from FEL-PRO, NATIONAL, VICTOR REINZ and 4 other brands. FEL-PRO BS40013 carries the "Popular" badge.
Cylinder Head Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ARP Popular | 1343601 | 🇺🇸 US 🇨🇦 CA | SetHex Bolt Head | View on Amazon |
| FEL-PRO Popular | ES72856 | 🇺🇸 US | Set | View on Amazon |
| APEX | AHB322 | 🇺🇸 US | Set | View on Amazon |
| ARP | 1343701 | 🇺🇸 US 🇨🇦 CA | SetBlack Oxide | View on Amazon |
| ARP | 1343703 | 🇺🇸 US 🇨🇦 CA | SetBlack Oxide Inner Rows, Stainless Steel Outer Row | View on Amazon |
| ARP | 1343603 | 🇺🇸 US 🇨🇦 CA | SetStainless Steel Hex Bolt Head | View on Amazon |
| ARP | 1344001 | 🇺🇸 US 🇨🇦 CA | Stud TypeHex Bolt Head | View on Amazon |
| MAHLE / CLEVITE | GS33285 | 🇺🇸 US | Cylinder Head Bolt KitSet | View on Amazon |
| VICTOR REINZ | 141004801 | 🇺🇸 US | Set | View on Amazon |
This table covers the bolts that clamp the cylinder head to the block.
9 Cylinder Head Bolt parts for the 1970 Excalibur Phaeton come from 5 brands — ARP, FEL-PRO, APEX and 2 other brands. The "Popular" part is ARP 1343601.
This group includes ARP 1343601, FEL-PRO ES72856 and APEX AHB322 and the remaining parts above.
Cylinder Head Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Popular | 7733PT2 | 🇺🇸 US | Permatorque | View on Amazon |
| FEL-PRO Popular | 501SD | 🇺🇸 US | Permatorque Severe Duty | View on Amazon |
| APEX | AHG322 | 🇺🇸 US | View on Amazon | |
| FEL-PRO | 7733SH1 | 🇺🇸 US | with Embossed Steel Head Gaskets | View on Amazon |
| FEL-PRO | 8651PT | 🇺🇸 US | with High Performance Engine | View on Amazon |
| MAHLE / CLEVITE | 1178VC | 🇺🇸 US | Composite | View on Amazon |
| VICTOR REINZ | 611031900 | 🇺🇸 US | 0.045 IN Thick | View on Amazon |
This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
7 Cylinder Head Gasket parts for the 1970 Excalibur Phaeton come from 4 brands — FEL-PRO, APEX, MAHLE / CLEVITE and 1 other brand. The "Popular" part is FEL-PRO 7733PT2.
Listed part numbers: FEL-PRO 7733PT2, FEL-PRO 501SD and APEX AHG322, plus the other parts above.
Cylinder Head Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| APEX Popular | AHS3022 | 🇺🇸 US | View on Amazon | |
| FEL-PRO Popular | HS7733PT2 | 🇺🇸 US | 2-1/2 (In) Inside Diameter & 2-17/32 (In) Inside Diameter Exhaust Pipe Packing Not Included.2-17/32 (In) Inside Diameter Exhaust Pipe Packing Not Included | View on Amazon |
| FEL-PRO | HS7733SH2 | 🇺🇸 US | with Embossed Steel Head Gaskets2-17/32 (In) Inside Diameter Exhaust Pipe Packing Not Included | View on Amazon |
| FEL-PRO | HS7733PT2VK | 🇺🇸 US | 2-1/2 (In) Inside Diameter & 2-17/32 (In) Inside Diameter Exhaust Pipe Packing Not Included.Permatorque | View on Amazon |
| FEL-PRO | HS7733SH2VK | 🇺🇸 US | 2-17/32 (In) Inside Diameter Exhaust Pipe Packing Not Includedwith Embossed Steel Head Gaskets | View on Amazon |
| MAHLE / CLEVITE | HS1178BJ | 🇺🇸 US | Contains Beaded Steel Cylinder Head GasketIncludes Valve Stem Seals | View on Amazon |
| MAHLE / CLEVITE | HS1178VJ | 🇺🇸 US | Contains Composite Cylinder Head Gasket, Exhaust Pipe Gasket Not IncludedIncludes Valve Stem Seals | View on Amazon |
| VICTOR REINZ | 021007601 | 🇺🇸 US | with Multi-Layer Steel Head Gasket | View on Amazon |
This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
8 Cylinder Head Gasket Set parts for the 1970 Excalibur Phaeton come from 4 brands — FEL-PRO, MAHLE / CLEVITE, APEX and 1 other brand. The "Popular" part is APEX AHS3022.
This group includes APEX AHS3022, FEL-PRO HS7733PT2 and FEL-PRO HS7733SH2 and the remaining parts above.
Cylinder Head Spacer Shim
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE | 55138 | 🇺🇸 US | View on Amazon | |
| VICTOR REINZ | 711382900 | 🇺🇸 US | View on Amazon |
This table covers the Cylinder Head Spacer shims.
2 Cylinder Head Spacer Shim parts for the 1970 Excalibur Phaeton come from 2 brands — MAHLE / CLEVITE and VICTOR REINZ.
Listed part numbers: MAHLE / CLEVITE 55138 and VICTOR REINZ 711382900.
Engine Kit Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Popular | FS7733PT2 | 🇺🇸 US | 2-17/32 (In) Inside Diameter Exhaust Pipe Packing Not IncludedOverhaul Set | View on Amazon |
| FEL-PRO Popular | FS7733SH2 | 🇺🇸 US | Overhaul SetRear Main Seal Not Included | View on Amazon |
| APEX | AFS3022 | 🇺🇸 US | View on Amazon | |
| ENGINE PRO | 301000 | 🇺🇸 US | View on Amazon | |
| ENGINE PRO | 311000 | 🇺🇸 US | FEL-Pro CO-Branded Performance Gasket Sets with Permatorque Steel Core Laminate Head Gaskets | View on Amazon |
| ENGINE PRO | 311000MLS | 🇺🇸 US | FEL-Pro CO-Branded Perfomance Gasket Sets with MLS Head Gaskets | View on Amazon |
| MAHLE / CLEVITE | FS1178BJ | 🇺🇸 US | Contains Beaded Steel Cylinder Head GasketFull Gasket Set | View on Amazon |
| VICTOR REINZ | 011004401 | 🇺🇸 US | Multi Layered Steel | View on Amazon |
This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
8 Engine Kit Gasket Set parts for the 1970 Excalibur Phaeton come from 5 brands — ENGINE PRO, FEL-PRO, APEX and 2 other brands. The "Popular" part is FEL-PRO FS7733PT2.
Part numbers include FEL-PRO FS7733PT2, FEL-PRO FS7733SH2 and APEX AFS3022, among others listed above.
Buying Engine Parts for a 1970 Excalibur Phaeton
On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.
- Confirm you have the 5.7L 350cid V8 engine — every part on this page is matched to it.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Connecting Rod Bearing and Crankshaft Seal .
Frequently Asked Questions
How many engine parts fit the 1970 Excalibur Phaeton?
Our catalog currently lists 79 engine parts for the 1970 Excalibur Phaeton across 14 subcategories and 11 brands, covering the 5.7L 350cid V8 engine. Each part is matched to the engine(s) it fits.
What are the signs of engine problems on a 1970 Excalibur Phaeton?
Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1970 Excalibur Phaeton was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 1970 Excalibur Phaeton?
Every part on this page is matched to the 5.7L 350cid V8 engine. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 1970 Excalibur Phaeton
Engine Parts for Other Excalibur Phaeton Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.