The 1972 Excalibur Phaeton has 58 engine parts with verified fitment on this page — 14 part types and 10 brands, covering the 7.4L 454cid V8 engine. Each part includes a manufacturer part number and application notes.
The engine on the 1972 Excalibur Phaeton covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. The largest groups are Connecting Rod Bearing (13 parts), Cylinder Head Bolt (7 parts) and Cylinder Head Gasket (7 parts). The other 11 part types cover the remaining 31 parts.
Every part on this page is matched to the 7.4L 454cid V8 — the only engine offered in the 1972 Excalibur Phaeton.
The most listed brands for 1972 Excalibur Phaeton engine parts are KING ENGINE BEARINGS (19 parts), FEL-PRO (10 parts) and ARP (9 parts), plus 7 more brands. Quality grades include High Performance and Standard Replacement.
10 parts on this 1972 Excalibur Phaeton page carry a "Popular" badge — the source catalog's flag for options frequently chosen for this vehicle — including KING ENGINE BEARINGS CR808HPN (Connecting Rod Bearing) and KING ENGINE BEARINGS MB556SI (Crankshaft Main Bearing). Click any part number to see every vehicle that part fits.
Bolt Kit
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ARP | 5359601 | 🇺🇸 US 🇨🇦 CA | Stainless Steel Hex Bolt Head | View on Amazon |
This table covers the Bolt kits.
This group shows a single part: ARP 5359601.
Camshaft Bearing
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| KING ENGINE BEARINGS | CS524HP | 🇺🇸 US | alecular (racing line) | View on Amazon |
This table covers the Camshaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.
This group shows a single part: KING ENGINE BEARINGS CS524HP.
Camshaft Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ARP | 1341001 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the Camshaft bolts.
One part is listed for the 1972 Excalibur Phaeton — ARP 1341001.
Connecting Rod Bearing
High Performance
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| KING ENGINE BEARINGS Popular | CR808HPN | 🇺🇸 US | SetAlecular (Racing Line) | View on Amazon |
| KING ENGINE BEARINGS Popular | CR808XPN | 🇺🇸 US | SetRace bearings, Trimetal [Pmax Black] | View on Amazon |
| KING ENGINE BEARINGS | CR808HPNX | 🇺🇸 US | alecular (racing line)Set | View on Amazon |
| KING ENGINE BEARINGS | CR808HPND | 🇺🇸 US | SetAlecular (Racing Line) | View on Amazon |
| KING ENGINE BEARINGS | CR808HPNDX | 🇺🇸 US | Setwith Extra Oil Clearance | View on Amazon |
| KING ENGINE BEARINGS | CR808XPNX | 🇺🇸 US | Race bearings, Trimetal [Pmax Black]Set | View on Amazon |
| KING ENGINE BEARINGS | CR808XPND | 🇺🇸 US | Race bearings, Trimetal [Pmax Black]Set | View on Amazon |
| KING ENGINE BEARINGS | CR808XPNDX | 🇺🇸 US | Race bearings, Trimetal [Pmax Black]Set | View on Amazon |
| KING ENGINE BEARINGS | CR808XPNC | 🇺🇸 US | pmaxkote (racing line), polymer coatedSet | View on Amazon |
| KING ENGINE BEARINGS | CR808XPNCX | 🇺🇸 US | pmaxkote (racing line), polymer coatedSet | View on Amazon |
| KING ENGINE BEARINGS | CR808XPNDC | 🇺🇸 US | pmaxkote (racing line), polymer coatedSet | View on Amazon |
| KING ENGINE BEARINGS | CR808XPNDCX | 🇺🇸 US | pmaxkote (racing line), polymer coatedSet | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| KING ENGINE BEARINGS Popular | CR808SI | 🇺🇸 US | SetBimetal (Aluminum Silicon Base) | View on Amazon |
This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.
13 Connecting Rod Bearing parts for the 1972 Excalibur Phaeton come from KING ENGINE BEARINGS. The "Popular" part is KING ENGINE BEARINGS CR808HPN.
The High Performance section lists 12 options from KING ENGINE BEARINGS — engineered beyond original-equipment specification. KING ENGINE BEARINGS CR808HPN is listed in this group.
In the Standard Replacement grade, KING ENGINE BEARINGS supplies 1 part: built to original-equipment specification. A representative part number is KING ENGINE BEARINGS CR808SI.
Conversion / Lower Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINE PRO | 3781801 | 🇺🇸 US | View on Amazon | |
| FEL-PRO | CS81801 | 🇺🇸 US | View on Amazon | |
| VICTOR REINZ | 081009001 | 🇺🇸 US | View on Amazon |
This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
3 Conversion / Lower Gasket Set parts for the 1972 Excalibur Phaeton come from 3 brands — ENGINE PRO, FEL-PRO and VICTOR REINZ.
This group includes ENGINE PRO 3781801, FEL-PRO CS81801 and VICTOR REINZ 081009001.
Crankshaft Main Bearing
High Performance
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| KING ENGINE BEARINGS | MB556HPN | 🇺🇸 US | alecular (racing line)Set | View on Amazon |
| KING ENGINE BEARINGS | MB556HPNX | 🇺🇸 US | alecular (racing line)Set | View on Amazon |
| KING ENGINE BEARINGS | MB556XPN | 🇺🇸 US | SetRace bearings, Trimetal [Pmax Black] | View on Amazon |
| KING ENGINE BEARINGS | MB556XPNX | 🇺🇸 US | Race bearings, Trimetal [Pmax Black]Set | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| KING ENGINE BEARINGS Popular | MB556SI | 🇺🇸 US | SetBimetal (Aluminum Silicon Base) | View on Amazon |
This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.
KING ENGINE BEARINGS supplies the 5 Crankshaft Main Bearing parts for the 1972 Excalibur Phaeton. KING ENGINE BEARINGS MB556SI carries the "Popular" badge.
High Performance: 4 parts, from KING ENGINE BEARINGS. A representative part number is KING ENGINE BEARINGS MB556HPN.
The Standard Replacement section: 1 option from KING ENGINE BEARINGS. KING ENGINE BEARINGS MB556SI is listed in this group.
Part numbers include KING ENGINE BEARINGS MB556SI, KING ENGINE BEARINGS MB556HPN and KING ENGINE BEARINGS MB556HPNX, among others listed above.
Crankshaft Main Bearing Cap Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ARP | 1355002 | 🇺🇸 US 🇨🇦 CA | 2 Bolt Main Bolt Kit | View on Amazon |
| ARP | 1355402 | 🇺🇸 US 🇨🇦 CA | Stud2 Bolt Main Stud Kit | View on Amazon |
This table covers the Crankshaft Main Bearing Cap bolts.
2 Crankshaft Main Bearing Cap Bolt parts for the 1972 Excalibur Phaeton come from ARP.
Part numbers include ARP 1355002 and ARP 1355402.
Crankshaft Repair Sleeve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BCA | NS99233 | 🇺🇸 US | Front | View on Amazon |
| SCHAEFFLER | SR3519 | 🇺🇸 US | View on Amazon | |
| WJB / INMOTION PARTS | WS99233 | 🇺🇸 US | Installation Depth: 1.61 In | View on Amazon |
This table covers the sleeves used to restore a grooved crankshaft seal surface.
3 Crankshaft Repair Sleeve parts are listed for the 1972 Excalibur Phaeton, from BCA, SCHAEFFLER and WJB / INMOTION PARTS.
This group includes BCA NS99233, SCHAEFFLER SR3519 and WJB / INMOTION PARTS WS99233.
Crankshaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Popular | BS400961 | 🇺🇸 US | Rubber | View on Amazon |
| NATIONAL Popular | 3945 | 🇺🇸 US | Front | View on Amazon |
| BCA | NS3945 | 🇺🇸 US | Front | View on Amazon |
| NATIONAL | 5072 | 🇺🇸 US | RearSplit Type | View on Amazon |
| VICTOR REINZ | 191011101 | 🇺🇸 US | Set | View on Amazon |
| WJB / INMOTION PARTS | WS3945 | 🇺🇸 US | Housing Bore: 3 In | View on Amazon |
This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
6 Crankshaft Seal parts are listed for the 1972 Excalibur Phaeton, from NATIONAL, FEL-PRO, BCA and 2 other brands. FEL-PRO BS400961 carries the "Popular" badge.
This group includes FEL-PRO BS400961, NATIONAL 3945 and BCA NS3945 and the remaining parts above.
Cylinder Head Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ARP Popular | 1354001 | 🇺🇸 US 🇨🇦 CA | Stud TypeHex Bolt Head | View on Amazon |
| FEL-PRO Popular | ES72264 | 🇺🇸 US | Set | View on Amazon |
| ARP | 1353603 | 🇺🇸 US 🇨🇦 CA | SetMark IV with Late Bowtie aluminum, Iron Dart, Pro-1, Pro Top Line & World Products iron heads | View on Amazon |
| ARP | 1353703 | 🇺🇸 US 🇨🇦 CA | SetMark IV with Late Bowtie aluminum, Iron Dart, Pro-1, Pro Top Line & World Products iron heads | View on Amazon |
| ARP | 1353610 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| ARP | 2354303 | 🇺🇸 US 🇨🇦 CA | Stud Type12 Point Bolt Head | View on Amazon |
| VICTOR REINZ | 141005001 | 🇺🇸 US | Set | View on Amazon |
This table covers the bolts that clamp the cylinder head to the block.
7 Cylinder Head Bolt parts for the 1972 Excalibur Phaeton come from 3 brands — ARP, FEL-PRO and VICTOR REINZ. The "Popular" part is ARP 1354001.
Part numbers include ARP 1354001, FEL-PRO ES72264 and ARP 1353603, among others listed above.
Cylinder Head Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Popular | 8180PT2 | 🇺🇸 US | Permatorque | View on Amazon |
| FEL-PRO Popular | 502SD | 🇺🇸 US | Permatorque Severe Duty | View on Amazon |
| FEL-PRO | 1037 | 🇺🇸 US 🇨🇦 CA | Pre-Flattened Steel Wire Combustion Seal | View on Amazon |
| FEL-PRO | 1047 | 🇺🇸 US 🇨🇦 CA | Pre-Flattened Steel Wire Combustion Seal | View on Amazon |
| MAHLE / CLEVITE | 3805VC | 🇺🇸 US | Composite | View on Amazon |
| VICTOR REINZ | 611034200 | 🇺🇸 US | View on Amazon | |
| VICTOR REINZ | 611060700 | 🇺🇸 US | Heavy Duty Design | View on Amazon |
This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
7 Cylinder Head Gasket parts for the 1972 Excalibur Phaeton come from 3 brands — FEL-PRO, VICTOR REINZ and MAHLE / CLEVITE. The "Popular" part is FEL-PRO 8180PT2.
This group includes FEL-PRO 8180PT2, FEL-PRO 502SD and FEL-PRO 1037 and the remaining parts above.
Cylinder Head Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO | HS8180PT5 | 🇺🇸 US | Includes Valve Stem SealsSpecial High Performance Intake Manifold Set Not Included | View on Amazon |
| FEL-PRO | HS8180PT5VK | 🇺🇸 US | Includes Valve Stem Seals, Head BoltsSpecial High Performance Intake Manifold Set Not Included | View on Amazon |
| MAHLE / CLEVITE | HS3805VJ | 🇺🇸 US | Contains High Temperature Valve Stem Seals | View on Amazon |
| VICTOR REINZ | 021035401 | 🇺🇸 US | View on Amazon |
This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
4 Cylinder Head Gasket Set parts for the 1972 Excalibur Phaeton come from 3 brands — FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.
Part numbers include FEL-PRO HS8180PT5, FEL-PRO HS8180PT5VK and MAHLE / CLEVITE HS3805VJ, among others listed above.
Cylinder Head Spacer Shim
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| VICTOR REINZ | 711637200 | 🇺🇸 US | View on Amazon |
This table covers the Cylinder Head Spacer shims.
This group shows a single part: VICTOR REINZ 711637200.
Engine Kit Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINE PRO | 301009 | 🇺🇸 US | View on Amazon | |
| ENGINE PRO | 311005 | 🇺🇸 US | FEL-Pro CO-Branded Performance Gasket Sets with Permatorque Steel Core Laminate Head Gaskets | View on Amazon |
| ENGINE PRO | 311005MLS | 🇺🇸 US | FEL-Pro CO-Branded Perfomance Gasket Sets with MLS Head Gaskets | View on Amazon |
| FEL-PRO | FS8180PT9 | 🇺🇸 US | Overhaul SetSpecial High Performance Intake Manifold Set, Double Valve Spring Option Valve Stem Seals Not Included | View on Amazon |
This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
4 Engine Kit Gasket Set parts for the 1972 Excalibur Phaeton come from 2 brands — ENGINE PRO and FEL-PRO.
This group includes ENGINE PRO 301009, ENGINE PRO 311005 and ENGINE PRO 311005MLS and the remaining parts above.
Buying Engine Parts for a 1972 Excalibur Phaeton
On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.
- Confirm you have the 7.4L 454cid V8 engine — every part on this page is matched to it.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Connecting Rod Bearing and Cylinder Head Bolt .
Frequently Asked Questions
How many engine parts fit the 1972 Excalibur Phaeton?
Our catalog currently lists 58 engine parts for the 1972 Excalibur Phaeton across 14 subcategories and 10 brands, covering the 7.4L 454cid V8 engine. Each part is matched to the engine(s) it fits.
What are the signs of engine problems on a 1972 Excalibur Phaeton?
Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1972 Excalibur Phaeton was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 1972 Excalibur Phaeton?
Every part on this page is matched to the 7.4L 454cid V8 engine. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 1972 Excalibur Phaeton
Engine Parts for Other Excalibur Phaeton Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.