2016 Ford Fusion Automatic Transmission Parts

This table covers the control units that command automatic-transmission shifts. Read more

This group shows a single part: DORMAN 609033.

This table covers the bushings in this assembly. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

One part is listed for the 2016 Ford Fusion — DURA-BOND GMT211.

This table covers the Bushing kits. Read more

One part is listed for the 2016 Ford Fusion — DURA-BOND TK25.

This table covers the Case bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

DURA-BOND supplies both parts for the 2016 Ford Fusion.

Part numbers include DURA-BOND GMT210DT and DURA-BOND GMT210AT.

This table covers the clutch-plate packs inside the transmission or transfer case. Read more

RAYBESTOS POWERTRAIN supplies both parts for the 2016 Ford Fusion.

The Friction Plate Pack section lists 1 option from RAYBESTOS POWERTRAIN — grouped under the catalog's "Friction Plate Pack" designation — the notes column spells out what sets them apart. RAYBESTOS POWERTRAIN RHT96520 is listed in this group.

In the Steel Plate Pack grade, RAYBESTOS POWERTRAIN supplies 1 part: grouped under the catalog's "Steel Plate Pack" designation — the notes column spells out what sets them apart. A representative part number is RAYBESTOS POWERTRAIN 000643.

Listed part numbers: RAYBESTOS POWERTRAIN RHT96520 and RAYBESTOS POWERTRAIN 000643.

This table covers the Conductor plates. Typical signs include warpage, cracks, or a plate that no longer locates the assembly. Confirm which plate the notes describe — backing plates, clutch plates and strike plates are different parts. Read more

This group shows a single part: VEMO V25860013.

This table covers the replacement filters for this application — the table heading and notes say which circuit. Typical signs include restricted flow — long cranking, weak airflow, or dirty fluid after a short interval. Seat the new filter so it cannot bypass, and use the grade the notes call for. Read more

7 Filter parts are listed for the 2016 Ford Fusion, from VARIOUS MFR, MOTORCRAFT, RAYBESTOS POWERTRAIN and 1 other brand. MOTORCRAFT FT192 carries the "Popular" badge.

In the Economy grade, VARIOUS MFR and AUTOTECNICA supply 3 parts: the catalog's value-priced group. A representative part number is AUTOTECNICA FD1222915.

The Standard Replacement section lists 4 options from MOTORCRAFT and RAYBESTOS POWERTRAIN — built to original-equipment specification. MOTORCRAFT FT192 is listed in this group.

Listed part numbers: MOTORCRAFT FT192, AUTOTECNICA FD1222915 and VARIOUS MFR PT99788, plus the other parts above.

This table covers the flexplates that connect the crankshaft to the torque converter. Read more

4 Flexplate parts for the 2016 Ford Fusion come from 2 brands — ATP and PIONEER.

Listed part numbers: ATP Z665, ATP Z602 and PIONEER FRA573, plus the other parts above.

This table covers the heat exchangers that cool transmission fluid. Typical signs include fluid that overheats, a leak at the cooler fittings, or milky fluid that says coolant and ATF have mixed. Flush the lines when you replace a cooler. Cross-contamination is how a small leak becomes a transmission job. Read more

6 Fluid Cooler parts are listed for the 2016 Ford Fusion, from KOYORAD, DORMAN, GPD and 2 other brands.

Part numbers include DORMAN 918966, GPD 2611387 and KOYORAD EC0073, among others listed above.

This table covers the Fluid Cooler Line hoses. Typical signs include swelling, cracks, a soft spot, or a leak at a clamp. Replace adjacent aged hoses while the system is drained — they share the same heat cycle. Read more

10 Fluid Cooler Line / Hose parts are listed for the 2016 Ford Fusion, from SUNSONG and DORMAN. DORMAN 724038 carries the "Popular" badge.

This table covers the Fluid Cooler O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

One part is listed for the 2016 Ford Fusion — DORMAN 66284.

This table covers the pans that hold automatic-transmission fluid. Read more

3 Fluid Pan parts for the 2016 Ford Fusion come from 3 brands — DORMAN, SKP and SPECTRA PREMIUM.

Listed part numbers: DORMAN 265902, SKP SK265902 and SPECTRA PREMIUM TP0902.

This table covers the Fluid Pump bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

DURA-BOND supplies the 3 Fluid Pump Bushing parts for the 2016 Ford Fusion.

This group includes DURA-BOND GMT28, DURA-BOND GMT28TG and DURA-BOND GMT28T.

This table covers the Fluid temperature sensors. Typical signs include hard cold starts, a fan that never comes on, or a gauge that disagrees with the scan tool. A sensor that reads open or shorted is usually the part; an implausible-but-smooth reading can be wiring. Read more

2 Fluid Temperature Sensor parts are listed for the 2016 Ford Fusion, from NTK and WELLS.

Listed part numbers: NTK AT0021 and WELLS 5S12171.

This table covers the wear sleeves used to restore a Output Shaft seal surface. Read more

5 Output Shaft Repair Sleeve parts are listed for the 2016 Ford Fusion, from WJB / INMOTION PARTS, NATIONAL and BCA. WJB / INMOTION PARTS WS99166 carries the "Popular" badge.

Part numbers include WJB / INMOTION PARTS WS99166, BCA NS99146 and NATIONAL 99166, among others listed above.

This table covers the seals at the Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

10 Output Shaft Seal parts are listed for the 2016 Ford Fusion, from SKF, WJB / INMOTION PARTS, NATIONAL and 1 other brand. NATIONAL 710709 carries the "Popular" badge.

This table covers the Pressure Control (EPC) solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

3 Pressure Control (EPC) Solenoid parts are listed for the 2016 Ford Fusion, from WELLS and STANDARD MOTOR PRODUCTS.

This group includes STANDARD MOTOR PRODUCTS TCS192, WELLS 2N1353 and WELLS 2N1315.

This table covers the rebuild kits for this assembly. Read more

16 Rebuild Kit parts for the 2016 Ford Fusion come from 5 brands — TRANSTEC, PA CARGO, ATP and 2 other brands. The "Popular" part is PA CARGO DK11300AS.

The Banner Kit (Overhaul Kit + Friction Clutch Plates) section lists 1 option from PA CARGO — grouped under the catalog's "Banner Kit (Overhaul Kit + Friction Clutch Plates)" designation — the notes column spells out what sets them apart. PA CARGO DK11300AS is listed in this group.

In the Master Kit (Overhaul Kit + Friction & Steel Clutch Plates) grade, PA CARGO supplies 1 part: grouped under the catalog's "Master Kit (Overhaul Kit + Friction & Steel Clutch Plates)" designation — the notes column spells out what sets them apart. A representative part number is PA CARGO DK11300A.

The Overhaul Kit (Gaskets, Seals, O-Rings & Sealing Rings) section lists 6 options from TRANSTEC, MOTORCRAFT, PA CARGO and 2 other brands — grouped under the catalog's "Overhaul Kit (Gaskets, Seals, O-Rings & Sealing Rings)" designation — the notes column spells out what sets them apart. MOTORCRAFT MTK132959 is listed in this group.

8 further parts sit outside the graded sections, with the same engine-level match.

This table covers the Shift cables. Typical signs include a stretched or frayed cable, or a control that no longer reaches the end of its travel. Route the new cable through the same clips. A kinked cable binds and fails early. Read more

3 Shift Cable parts for the 2016 Ford Fusion come from 3 brands — ATP, DORMAN and PIONEER.

Part numbers include ATP Y1752, DORMAN 905649 and PIONEER CA1393.

This table covers the Shift Improvement kits. Read more

2 Shift Improvement Kit parts are listed for the 2016 Ford Fusion, from SONNAX and TRANSGO.

This group includes SONNAX 6F35ZIP and TRANSGO SK6F35G2.

This table covers the Shift solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

4 Shift Solenoid parts for the 2016 Ford Fusion come from 3 brands — VEMO, STANDARD MOTOR PRODUCTS and WELLS.

Listed part numbers: STANDARD MOTOR PRODUCTS TCS190, VEMO V33770187 and VEMO V33770188, plus the other parts above.

This table covers the Sun Gear bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

3 Sun Gear Bushing parts for the 2016 Ford Fusion come from DURA-BOND.

Listed part numbers: DURA-BOND GMT26, DURA-BOND GMT25 and DURA-BOND GMT25AT.

This table covers the Torque converters. Typical signs include a sulfur smell, rattling substrate, or an efficiency code. Confirm CARB vs Federal certification in the notes before ordering. Read more

7 Torque Converter parts are listed for the 2016 Ford Fusion, from TC REMANUFACTURING, MOTORCRAFT and LUK. LUK TC0010 carries the "Popular" badge.

This group includes LUK TC0010, MOTORCRAFT EG9Z7902E and MOTORCRAFT EG9Z7902ERM and the remaining parts above.

This table covers the Torque Converter Clutch solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

One part is listed for the 2016 Ford Fusion — STANDARD MOTOR PRODUCTS TCS191.

This table covers the seals at the Torque Converter Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Torque Converter Shaft Seal parts for the 2016 Ford Fusion come from 2 brands — NATIONAL and WJB / INMOTION PARTS.

This group includes NATIONAL 711022 and WJB / INMOTION PARTS WS711022.

This table covers the automatic-transmission fluids specified for this gearbox. Typical signs include harsh or delayed shifts, fluid that smells burnt, or a shudder at light throttle. Use exactly the specification in the notes. Automatic transmissions are unforgiving of the wrong fluid. Read more

20 Transmission Fluid parts are listed for the 2016 Ford Fusion, from VALVOLINE, LIQUI MOLY, PENTOSIN and 5 other brands. ACDELCO 109243 carries the "Popular" badge.

The ATF 64 section lists 2 options from PENTOSIN — grouped under the catalog's "ATF 64" designation — the notes column spells out what sets them apart. PENTOSIN 1058113 is listed in this group.

The CVT section lists 2 options from LUBEGARD and VALVOLINE — grouped under the catalog's "CVT" designation — the notes column spells out what sets them apart. LUBEGARD 68112 is listed in this group.

In the Dexron grade, VALVOLINE and ACDELCO supply 3 parts: grouped under the catalog's "Dexron" designation — the notes column spells out what sets them apart. A representative part number is ACDELCO 109243.

In the Mercon grade, MOTORCRAFT supplies 2 parts: grouped under the catalog's "Mercon" designation — the notes column spells out what sets them apart. A representative part number is MOTORCRAFT XT10QLVC.

In the Multi-Vehicle grade, VALVOLINE, LIQUI MOLY, LUCAS OIL and 2 other brands supply 10 parts: grouped under the catalog's "Multi-Vehicle" designation — the notes column spells out what sets them apart. A representative part number is VALVOLINE VV3246.

1 ungrouped part is not assigned to a grade, with the same engine-level match.

This table covers the conditioners and additives used with this transmission fluid. Read more

LUBEGARD supplies the 7 Transmission Fluid Additive parts for the 2016 Ford Fusion. LUBEGARD 19610 carries the "Popular" badge.

Listed part numbers: LUBEGARD 19610, LUBEGARD 60902 and LUBEGARD 19689, plus the other parts above.

This table covers the mounts that hold the transmission to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

10 Transmission Mount parts for the 2016 Ford Fusion come from 5 brands — PIONEER, ANCHOR, DEA / MARMON RIDE CONTROL and 2 other brands. The "Popular" part is ANCHOR 3327.

The Economy section: 1 option from SKP. SKP SKM3327 is listed in this group.

Standard Replacement: 4 parts, from ANCHOR, DEA / MARMON RIDE CONTROL, PIONEER and 1 other brand. A representative part number is ANCHOR 3327.

5 further parts sit outside the graded sections, with the same engine-level match.

This table covers the testers used to diagnose a valve body. Read more

One part is listed for the 2016 Ford Fusion — SONNAX 144740VTP.