2019 Ford F59 Engine Parts

Engine:
6.8L V10

The 2019 Ford F59 has 19 engine parts with verified fitment on this page — 7 part types and 6 brands, covering the 6.8L V10 engine. Each part includes a manufacturer part number and application notes.

The engine on the 2019 Ford F59 covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. The largest groups are Crankshaft Seal (6 parts), Conversion / Lower Gasket Set (4 parts) and Connecting Rod Bearing (3 parts). The other 4 part types cover the remaining 6 parts.

Connecting Rod Bearing

Brand Part Number Markets Notes Buy
MAHLE / CLEVITE CB1442A
🇺🇸 US 🇨🇦 CA
A Series (Aluminum)Pair
View on
Amazon
MAHLE / CLEVITE CB1442A10
🇺🇸 US 🇨🇦 CA
A Series (Aluminum)Set
View on
Amazon
SEALED POWER 1985A
🇺🇸 US 🇨🇦 CA
A-Series aluminum bearings
View on
Amazon

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.

Conversion / Lower Gasket Set

Brand Part Number Markets Notes Buy
ENGINE PRO 37261622
🇺🇸 US 🇨🇦 CA
View on
Amazon
FEL-PRO CS261622
🇺🇸 US 🇨🇦 CA
Permadry Rubber Oil Pan Gasket(s) Included
View on
Amazon
MAHLE / CLEVITE CS54242
🇺🇸 US 🇨🇦 CA
View on
Amazon
ULTRA-POWER CS261622
🇺🇸 US 🇨🇦 CA
SetMolded Rubber Oil Pan Gasket(s) Included
View on
Amazon

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Crankshaft Main Bearing

Brand Part Number Markets Notes Buy
MAHLE / CLEVITE MS2203A
🇺🇸 US 🇨🇦 CA
A Series (Aluminum)Set
View on
Amazon

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.

Crankshaft Repair Sleeve

Brand Part Number Markets Notes Buy
FEL-PRO 16270
🇺🇸 US 🇨🇦 CA
RearUse with Installation tool
View on
Amazon

This table covers the sleeves used to restore a grooved crankshaft seal surface.

Crankshaft Seal

Brand Part Number Markets Notes Buy
FEL-PRO Popular TCS46117
🇺🇸 US 🇨🇦 CA
Front
View on
Amazon
MAHLE / CLEVITE Popular 67616
🇺🇸 US 🇨🇦 CA
Timing Cover SealRubber
View on
Amazon
FEL-PRO BS40620
🇺🇸 US 🇨🇦 CA
Rubber
Fitment notes — FEL-PRO BS40620
Rubber
Rear1 PieceEarly Model(s)
View on
Amazon
FEL-PRO BS40644
🇺🇸 US 🇨🇦 CA
PTFE RubberIncludes Sleeve
Fitment notes — FEL-PRO BS40644
PTFE RubberIncludes Sleeve
Rear1 PieceLate Model(s)
View on
Amazon
MAHLE / CLEVITE JV1612
🇺🇸 US 🇨🇦 CA
SetRubber
Fitment notes — MAHLE / CLEVITE JV1612
SetRubberRear
View on
Amazon
MAHLE / CLEVITE JV1635
🇺🇸 US 🇨🇦 CA
Plastic
Fitment notes — MAHLE / CLEVITE JV1635
Plastic
Rear Installation Sleeve Included
View on
Amazon

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Cylinder Head

Brand Part Number Markets Notes Buy
CYLINDER HEAD EXPRESS CI428BL
🇺🇸 US 🇨🇦 CA
New Bare Cylinder Head Casting - No Valves or Springs
Fitment notes — CYLINDER HEAD EXPRESS CI428BL
New Bare Cylinder Head Casting - No Valves or Springs
Left12mm Spark PlugsCasting # 5C3E
View on
Amazon
CYLINDER HEAD EXPRESS CI429BR
🇺🇸 US 🇨🇦 CA
New Bare Cylinder Head Casting - No Valves or Springs
Fitment notes — CYLINDER HEAD EXPRESS CI429BR
New Bare Cylinder Head Casting - No Valves or Springs
Right12mm Spark PlugsCasting # 5C3E
View on
Amazon

This table covers the cylinder heads that close the top of the block.

Cylinder Head Bolt

Brand Part Number Markets Notes Buy
FEL-PRO ES727981
🇺🇸 US 🇨🇦 CA
Set
Fitment notes — FEL-PRO ES727981
Set
Head Bolts with Washers
View on
Amazon
MAHLE / CLEVITE GS33531
🇺🇸 US 🇨🇦 CA
Steel
Fitment notes — MAHLE / CLEVITE GS33531
Steel
with Integrated Washers
View on
Amazon

This table covers the bolts that clamp the cylinder head to the block.

Buying Engine Parts for a 2019 Ford F59

On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.

  • Confirm you have the 6.8L V10 engine — every part on this page is matched to it.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Crankshaft Seal and Conversion / Lower Gasket Set .

Frequently Asked Questions

How many engine parts fit the 2019 Ford F59?

Our catalog currently lists 19 engine parts for the 2019 Ford F59 across 7 subcategories and 6 brands, covering the 6.8L V10 engine. Each part is matched to the engine(s) it fits.

What are the signs of engine problems on a 2019 Ford F59?

Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What should I replace at the same time?

Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2019 Ford F59 was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 2019 Ford F59?

Every part on this page is matched to the 6.8L V10 engine. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 2019 Ford F59

Engine Parts for Other Ford F59 Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.