The 2025 Ford F59 has 49 engine parts with verified fitment on this page — 31 part types and 10 brands, covering the 7.3L V8 engine. Each part includes a manufacturer part number and application notes.
The engine on the 2025 Ford F59 covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. The largest groups are Oil Filter (6 parts), Valve Seat (4 parts) and Cylinder Head Gasket (2 parts). The other 28 part types cover the remaining 37 parts.
The 2025 Ford F59 came with a single engine, the 7.3L V8, and every part is verified against it.
10 brands supply engine parts for the 2025 Ford F59, led by MAHLE / CLEVITE (19 parts), SBI (11 parts) and QUALCAST (5 parts), plus 7 more brands. Quality grades include Standard Replacement, Economy and High Performance / Heavy Duty.
A "Popular" badge means the source catalog flagged the part as frequently chosen for the 2025 Ford F59. 2 parts have it, including MOTORCRAFT FL820S (Oil Filter) and WIX 51372 (Oil Filter). Each part number opens a page with every vehicle that part fits.
Conversion / Lower Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE | CS55516 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
One part is listed for the 2025 Ford F59 — MAHLE / CLEVITE CS55516.
Crankshaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE | 68115 | 🇺🇸 US 🇨🇦 CA | Fluoroelastomer | View on Amazon |
This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
This group shows a single part: MAHLE / CLEVITE 68115.
Crankshaft Seal Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE | B33824 | 🇺🇸 US 🇨🇦 CA | Crankshaft Seal Retainer GasketMolded Rubber | View on Amazon |
This table covers the gaskets that seal the Crankshaft Seal. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
One part is listed for the 2025 Ford F59 — MAHLE / CLEVITE B33824.
Cylinder Head Alignment Dowel Pin
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE | GS34087 | 🇺🇸 US 🇨🇦 CA | SteelContains 2 Pieces | View on Amazon |
This table covers the Cylinder Head Alignment Dowel pins.
One part is listed for the 2025 Ford F59 — MAHLE / CLEVITE GS34087.
Cylinder Head Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE | GS34082 | 🇺🇸 US 🇨🇦 CA | Cylinder Head Bolt KitSet | View on Amazon |
This table covers the bolts that clamp the cylinder head to the block.
One part is listed for the 2025 Ford F59 — MAHLE / CLEVITE GS34082.
Cylinder Head Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE | 55517 | 🇺🇸 US 🇨🇦 CA | Multi-Layered Steel | View on Amazon |
| MAHLE / CLEVITE | 55516 | 🇺🇸 US 🇨🇦 CA | Multi-Layered Steel | View on Amazon |
This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
MAHLE / CLEVITE supplies both parts for the 2025 Ford F59.
Part numbers include MAHLE / CLEVITE 55517 and MAHLE / CLEVITE 55516.
Cylinder Head Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE | HS55516 | 🇺🇸 US 🇨🇦 CA | Includes Valve Stem Seals | View on Amazon |
This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
One part is listed for the 2025 Ford F59 — MAHLE / CLEVITE HS55516.
Exhaust Valve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| QUALCAST | 1013512 | 🇺🇸 US 🇨🇦 CA | 1.670 Head Diameter. 0.312 stem. 5.690 OAL. 3G | View on Amazon |
| SBI | 13512 | 🇺🇸 US 🇨🇦 CA | Hollow Stem | View on Amazon |
This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one.
2 Exhaust Valve parts for the 2025 Ford F59 come from 2 brands — QUALCAST and SBI.
Part numbers include QUALCAST 1013512 and SBI 13512.
Intake Manifold Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE | MS20624 | 🇺🇸 US 🇨🇦 CA | SetMolded Rubber | View on Amazon |
This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
One part is listed for the 2025 Ford F59 — MAHLE / CLEVITE MS20624.
Intake Valve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| QUALCAST | 1013511 | 🇺🇸 US 🇨🇦 CA | 2.163 Head DIA. 0.313 Stem. 5.743 OAL. 3G. | View on Amazon |
| SBI | 13511 | 🇺🇸 US 🇨🇦 CA | Hollow Stem | View on Amazon |
This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one.
2 Intake Valve parts for the 2025 Ford F59 come from 2 brands — QUALCAST and SBI.
This group includes QUALCAST 1013511 and SBI 13511.
Oil
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| PENTOSIN | 8044214 | 🇺🇸 US 🇨🇦 CA | 5W-30-Pentospeed-DEXOS1 GEN31 Liter | View on Amazon |
| PENTOSIN | 8044216 | 🇺🇸 US 🇨🇦 CA | 5W-30-Pentospeed-DEXOS1 GEN35 Liters | View on Amazon |
This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable.
2 Oil parts for the 2025 Ford F59 come from PENTOSIN.
Part numbers include PENTOSIN 8044214 and PENTOSIN 8044216.
Oil Cooler
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOTORCRAFT | YOC32 | 🇺🇸 US 🇨🇦 CA | Includes Filter | View on Amazon |
This table covers the heat exchangers that cool engine oil. Typical signs include oil at the cooler fittings, or coolant that looks like a milkshake. Pressure-test both circuits after a cooler swap — a leak here mixes oil and coolant.
This group shows a single part: MOTORCRAFT YOC32.
Oil Cooler Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE | GS34083 | 🇺🇸 US 🇨🇦 CA | Engine Oil Cooler Gasket Set | View on Amazon |
This table covers the gaskets that seal the Oil Cooler. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
One part is listed for the 2025 Ford F59 — MAHLE / CLEVITE GS34083.
Oil Dipstick / Tube
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOTORCRAFT | EDPST42 | 🇺🇸 US 🇨🇦 CA | Engine Oil Dipstick TubeTube Only | View on Amazon |
| MOTORCRAFT | EDPS70 | 🇺🇸 US 🇨🇦 CA | Engine Oil DipstickDipstick Only | View on Amazon |
This table covers the Oil Dipstick tubes.
2 Oil Dipstick / Tube parts for the 2025 Ford F59 come from MOTORCRAFT.
Part numbers include MOTORCRAFT EDPST42 and MOTORCRAFT EDPS70.
Oil Drain Plug
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN | 090034 | 🇺🇸 US 🇨🇦 CA | M12 x 1.75 Thread | View on Amazon |
| DORMAN | 090175 | 🇺🇸 US 🇨🇦 CA | Integrated GasketM12 x 1.75 Thread | View on Amazon |
This table covers the drain plugs in the oil pan.
2 Oil Drain Plug parts for the 2025 Ford F59 come from DORMAN.
This group includes DORMAN 090034 and DORMAN 090175.
Oil Drain Plug Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE | B33828 | 🇺🇸 US 🇨🇦 CA | Molded Rubber | View on Amazon |
This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
One part is listed for the 2025 Ford F59 — MAHLE / CLEVITE B33828.
Oil Filler Cap
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOTORCRAFT | EC791 | 🇺🇸 US 🇨🇦 CA | SAE-5W30 | View on Amazon |
This table covers the caps on the oil filler neck.
This group shows a single part: MOTORCRAFT EC791.
Oil Filter
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| VARIOUS MFR | PG4651 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
High Performance / Heavy Duty
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOBIL | M1210A | 🇺🇸 US 🇨🇦 CA | Extended Performance | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOTORCRAFT Popular | FL820S | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| WIX Popular | 51372 | 🇺🇸 US 🇨🇦 CA | Part may be slightly shorter than OE old design due to product update. | View on Amazon |
| HASTINGS / BALDWIN | LF110 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| VARIOUS MFR | PG4651EX | 🇺🇸 US 🇨🇦 CA | Extended Life | View on Amazon |
This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive.
6 Oil Filter parts for the 2025 Ford F59 come from 5 brands — VARIOUS MFR, MOBIL, MOTORCRAFT and 2 other brands. The "Popular" part is MOTORCRAFT FL820S.
The Economy section lists 1 option from VARIOUS MFR — the catalog's value-priced group. VARIOUS MFR PG4651 is listed in this group.
The High Performance / Heavy Duty section lists 1 option from MOBIL — grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. MOBIL M1210A is listed in this group.
In the Standard Replacement grade, MOTORCRAFT, WIX, HASTINGS / BALDWIN and 1 other brand supply 4 parts: built to original-equipment specification. A representative part number is MOTORCRAFT FL820S.
This group includes MOTORCRAFT FL820S, VARIOUS MFR PG4651 and MOBIL M1210A and the remaining parts above.
Oil Pan Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE | OS32453 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
This group shows a single part: MAHLE / CLEVITE OS32453.
Oil Pressure Relief Valve Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE | GS34085 | 🇺🇸 US 🇨🇦 CA | Molded Rubber | View on Amazon |
This table covers the gaskets that seal the Oil Pressure Relief Valve. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
One part is listed for the 2025 Ford F59 — MAHLE / CLEVITE GS34085.
Push Rod
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SBI | 1901556 | 🇺🇸 US 🇨🇦 CA | Intake and Exhaust8.415 Length | View on Amazon |
This table covers the pushrods that transfer lifter motion to the rocker arms.
One part is listed for the 2025 Ford F59 — SBI 1901556.
Timing Cover Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE | JV5289 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
This group shows a single part: MAHLE / CLEVITE JV5289.
Timing Cover Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE | 68114 | 🇺🇸 US 🇨🇦 CA | PTFE (Polytetrafluoroethylene) | View on Amazon |
This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
This group shows a single part: MAHLE / CLEVITE 68114.
Valve Cover Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE | VS50977S | 🇺🇸 US 🇨🇦 CA | Molded Rubber | View on Amazon |
| MAHLE / CLEVITE | VS50977 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
2 Valve Cover Gasket parts for the 2025 Ford F59 come from MAHLE / CLEVITE.
Part numbers include MAHLE / CLEVITE VS50977S and MAHLE / CLEVITE VS50977.
Valve Cover Grommet
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE | GS34084 | 🇺🇸 US 🇨🇦 CA | Contains 10 pcsKit | View on Amazon |
This table covers the Valve Cover grommets.
This group shows a single part: MAHLE / CLEVITE GS34084.
Valve Guide
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| QUALCAST | 303229 | 🇺🇸 US 🇨🇦 CA | 2.240 OAL. 0.3146 I.D. 0.5145 O.D. | View on Amazon |
| SBI | 1403229 | 🇺🇸 US 🇨🇦 CA | Intake and Exhaust0.3146 I.D. | View on Amazon |
This table covers the pressed-in bronze and cast-iron guides that align valve stems. Typical signs include oil smoke on startup, a guide that has gone oval, or a valve that no longer seats quietly. Guides are a machine-shop fit. Confirm stem diameter in the notes before ordering.
2 Valve Guide parts for the 2025 Ford F59 come from 2 brands — QUALCAST and SBI.
This group includes QUALCAST 303229 and SBI 1403229.
Valve Seat
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| QUALCAST | 21175050N | 🇺🇸 US 🇨🇦 CA | INSERT | View on Amazon |
| QUALCAST | 21218751 | 🇺🇸 US 🇨🇦 CA | INSERT | View on Amazon |
| SBI | SB218751 | 🇺🇸 US 🇨🇦 CA | Intake2-3/16 O.D. | View on Amazon |
| SBI | SB175070N | 🇺🇸 US 🇨🇦 CA | Non-Magnetic | View on Amazon |
This table covers the Valve seats.
4 Valve Seat parts are listed for the 2025 Ford F59, from QUALCAST and SBI.
Listed part numbers: QUALCAST 21175050N, QUALCAST 21218751 and SBI SB218751, plus the other parts above.
Valve Spring
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SBI | 1601710 | 🇺🇸 US 🇨🇦 CA | Exhaust2.821 Length | View on Amazon |
| SBI | 1601709 | 🇺🇸 US 🇨🇦 CA | Intake2.679 Length | View on Amazon |
This table covers the springs that close each intake and exhaust valve. Typical signs include a sagging corner, a broken coil, or a clunk from the spring pocket. Replace springs in axle pairs and inspect the seats.
SBI supplies both parts for the 2025 Ford F59.
Part numbers include SBI 1601710 and SBI 1601709.
Valve Spring Retainer
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SBI | 1611084 | 🇺🇸 US 🇨🇦 CA | Intake and ExhaustRetainer | View on Amazon |
This table covers the Valve Spring retainers.
One part is listed for the 2025 Ford F59 — SBI 1611084.
Valve Spring Retainer Keeper
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SBI | 1211083 | 🇺🇸 US 🇨🇦 CA | Intake and Exhaust0.2940 Length | View on Amazon |
This table covers the keepers that lock each valve-spring retainer to the stem.
One part is listed for the 2025 Ford F59 — SBI 1211083.
Valve Stem Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE | SS46156 | 🇺🇸 US 🇨🇦 CA | FluoroelastomerContains 16 PCS | View on Amazon |
| SBI | 1221519 | 🇺🇸 US 🇨🇦 CA | Intake and ExhaustViton Material | View on Amazon |
This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
2 Valve Stem Seal parts for the 2025 Ford F59 come from 2 brands — MAHLE / CLEVITE and SBI.
Part numbers include MAHLE / CLEVITE SS46156 and SBI 1221519.
Buying Engine Parts for a 2025 Ford F59
On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.
- Confirm you have the 7.3L V8 engine — every part on this page is matched to it.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Oil Filter and Valve Seat .
Frequently Asked Questions
How many engine parts fit the 2025 Ford F59?
Our catalog currently lists 49 engine parts for the 2025 Ford F59 across 31 subcategories and 10 brands, covering the 7.3L V8 engine. Each part is matched to the engine(s) it fits.
What are the signs of engine problems on a 2025 Ford F59?
Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What oil viscosity is listed for the 2025 Ford F59?
Oil rows on this page include SAE 5W-30. Confirm the engine and the weight on the filler cap before you buy — high-mileage and standard fills can differ.
What should I replace at the same time?
Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2025 Ford F59 was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2025 Ford F59?
Every part on this page is matched to the 7.3L V8 engine. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2025 Ford F59
Engine Parts for Other Ford F59 Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.