2024 Ford F59 Engine Parts

Engine:
7.3L V8

This page lists 54 engine parts for the 2024 Ford F59, across 32 part types, covering the 7.3L V8 engine. Every part shows its brand, manufacturer part number and fitment notes.

The engine on the 2024 Ford F59 covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. The largest groups are Oil Filter (6 parts), Camshaft Bearing (5 parts) and Valve Seat (4 parts). The other 29 part types cover the remaining 39 parts.

Camshaft Bearing

Brand Part Number Markets Notes Buy
DURA-BOND Popular FP35T
🇺🇸 US 🇨🇦 CA
Coated
View on
Amazon
DURA-BOND FP351T
🇺🇸 US 🇨🇦 CA
Coated
View on
Amazon
DURA-BOND FP352T
🇺🇸 US 🇨🇦 CA
Coated
View on
Amazon
DURA-BOND FP353T
🇺🇸 US 🇨🇦 CA
Coated
View on
Amazon
DURA-BOND FP354T
🇺🇸 US 🇨🇦 CA
Coated
View on
Amazon

This table covers the Camshaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.

Conversion / Lower Gasket Set

Brand Part Number Markets Notes Buy
MAHLE / CLEVITE CS55516
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Crankshaft Seal

Brand Part Number Markets Notes Buy
MAHLE / CLEVITE 68115
🇺🇸 US 🇨🇦 CA
Fluoroelastomer
Fitment notes — MAHLE / CLEVITE 68115
Fluoroelastomer
Rear
View on
Amazon

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Crankshaft Seal Gasket

Brand Part Number Markets Notes Buy
MAHLE / CLEVITE B33824
🇺🇸 US 🇨🇦 CA
Crankshaft Seal Retainer GasketMolded Rubber
Fitment notes — MAHLE / CLEVITE B33824
Crankshaft Seal Retainer GasketMolded RubberRear
View on
Amazon

This table covers the gaskets that seal the Crankshaft Seal. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Cylinder Head Alignment Dowel Pin

Brand Part Number Markets Notes Buy
MAHLE / CLEVITE GS34087
🇺🇸 US 🇨🇦 CA
SteelContains 2 Pieces
Fitment notes — MAHLE / CLEVITE GS34087
SteelContains 2 Pieces
16mm Straight Dowel Pin
View on
Amazon

This table covers the Cylinder Head Alignment Dowel pins.

Cylinder Head Bolt

Brand Part Number Markets Notes Buy
MAHLE / CLEVITE GS34082
🇺🇸 US 🇨🇦 CA
Cylinder Head Bolt KitSet
View on
Amazon

This table covers the bolts that clamp the cylinder head to the block.

Cylinder Head Gasket

Brand Part Number Markets Notes Buy
MAHLE / CLEVITE 55517
🇺🇸 US 🇨🇦 CA
Multi-Layered Steel
Fitment notes — MAHLE / CLEVITE 55517
Multi-Layered Steel
Right
View on
Amazon
MAHLE / CLEVITE 55516
🇺🇸 US 🇨🇦 CA
Multi-Layered Steel
Fitment notes — MAHLE / CLEVITE 55516
Multi-Layered Steel
Left
View on
Amazon

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Cylinder Head Gasket Set

Brand Part Number Markets Notes Buy
MAHLE / CLEVITE HS55516
🇺🇸 US 🇨🇦 CA
Includes Valve Stem Seals
Fitment notes — MAHLE / CLEVITE HS55516
Includes Valve Stem Seals
Exhaust Manifold Gaskets Not IncludedCylinder Head Bolt Replacement recommended
View on
Amazon

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Exhaust Valve

Brand Part Number Markets Notes Buy
QUALCAST 1013512
🇺🇸 US 🇨🇦 CA
1.670 Head Diameter. 0.312 stem. 5.690 OAL. 3G
View on
Amazon
SBI 13512
🇺🇸 US 🇨🇦 CA
Hollow Stem
View on
Amazon

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one.

Intake Manifold Gasket

Brand Part Number Markets Notes Buy
MAHLE / CLEVITE MS20624
🇺🇸 US 🇨🇦 CA
SetMolded Rubber
View on
Amazon

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Intake Valve

Brand Part Number Markets Notes Buy
QUALCAST 1013511
🇺🇸 US 🇨🇦 CA
2.163 Head DIA. 0.313 Stem. 5.743 OAL. 3G.
View on
Amazon
SBI 13511
🇺🇸 US 🇨🇦 CA
Hollow Stem
View on
Amazon

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one.

Oil

Brand Part Number Markets Notes Buy
PENTOSIN 8044214
🇺🇸 US 🇨🇦 CA
5W-30-Pentospeed-DEXOS1 GEN31 Liter
Fitment notes — PENTOSIN 8044214
5W-30-Pentospeed-DEXOS1 GEN31 Liter
For Temperature Above -22 F
View on
Amazon
PENTOSIN 8044216
🇺🇸 US 🇨🇦 CA
5W-30-Pentospeed-DEXOS1 GEN35 Liters
Fitment notes — PENTOSIN 8044216
5W-30-Pentospeed-DEXOS1 GEN35 Liters
For Temperature Above -22 F
View on
Amazon

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable.

Oil Cooler

Brand Part Number Markets Notes Buy
MOTORCRAFT YOC32
🇺🇸 US 🇨🇦 CA
Includes Filter
View on
Amazon

This table covers the heat exchangers that cool engine oil. Typical signs include oil at the cooler fittings, or coolant that looks like a milkshake. Pressure-test both circuits after a cooler swap — a leak here mixes oil and coolant.

Oil Cooler Gasket

Brand Part Number Markets Notes Buy
MAHLE / CLEVITE GS34083
🇺🇸 US 🇨🇦 CA
Engine Oil Cooler Gasket Set
View on
Amazon

This table covers the gaskets that seal the Oil Cooler. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Oil Dipstick / Tube

Brand Part Number Markets Notes Buy
MOTORCRAFT EDPST42
🇺🇸 US 🇨🇦 CA
Engine Oil Dipstick TubeTube Only
View on
Amazon
MOTORCRAFT EDPS70
🇺🇸 US 🇨🇦 CA
Engine Oil DipstickDipstick Only
View on
Amazon

This table covers the Oil Dipstick tubes.

Oil Drain Plug

Brand Part Number Markets Notes Buy
DORMAN 090034
🇺🇸 US 🇨🇦 CA
M12 x 1.75 Thread
Fitment notes — DORMAN 090034
M12 x 1.75 Thread
Gasket Included
View on
Amazon
DORMAN 090175
🇺🇸 US 🇨🇦 CA
Integrated GasketM12 x 1.75 Thread
View on
Amazon

This table covers the drain plugs in the oil pan.

Oil Drain Plug Gasket

Brand Part Number Markets Notes Buy
MAHLE / CLEVITE B33828
🇺🇸 US 🇨🇦 CA
Molded Rubber
Fitment notes — MAHLE / CLEVITE B33828
Molded Rubber
M11 or 7/16 IN Drain Plug Gasket Size
View on
Amazon

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Oil Filler Cap

Brand Part Number Markets Notes Buy
MOTORCRAFT EC791
🇺🇸 US 🇨🇦 CA
SAE-5W30
View on
Amazon

This table covers the caps on the oil filler neck.

Oil Filter

Economy

Brand Part Number Markets Notes Buy
VARIOUS MFR PG4651
🇺🇸 US 🇨🇦 CA
View on
Amazon

High Performance / Heavy Duty

Brand Part Number Markets Notes Buy
MOBIL M1210A
🇺🇸 US 🇨🇦 CA
Extended Performance
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
MOTORCRAFT Popular FL820S
🇺🇸 US 🇨🇦 CA
View on
Amazon
WIX Popular 51372
🇺🇸 US 🇨🇦 CA
Part may be slightly shorter than OE old design due to product update.
View on
Amazon
HASTINGS / BALDWIN LF110
🇺🇸 US 🇨🇦 CA
View on
Amazon
VARIOUS MFR PG4651EX
🇺🇸 US 🇨🇦 CA
Extended Life
View on
Amazon

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive.

Oil Pan Gasket

Brand Part Number Markets Notes Buy
MAHLE / CLEVITE OS32453
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Oil Pressure Relief Valve Gasket

Brand Part Number Markets Notes Buy
MAHLE / CLEVITE GS34085
🇺🇸 US 🇨🇦 CA
Molded Rubber
Fitment notes — MAHLE / CLEVITE GS34085
Molded Rubber
Oil Return Tube O-Ring Set
View on
Amazon

This table covers the gaskets that seal the Oil Pressure Relief Valve. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Push Rod

Brand Part Number Markets Notes Buy
SBI 1901556
🇺🇸 US 🇨🇦 CA
Intake and Exhaust8.415 Length
Fitment notes — SBI 1901556
Intake and Exhaust8.415 Length375X075 Diameter/Wall
View on
Amazon

This table covers the pushrods that transfer lifter motion to the rocker arms.

Timing Cover Gasket

Brand Part Number Markets Notes Buy
MAHLE / CLEVITE JV5289
🇺🇸 US 🇨🇦 CA
Set
View on
Amazon

This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Timing Cover Seal

Brand Part Number Markets Notes Buy
MAHLE / CLEVITE 68114
🇺🇸 US 🇨🇦 CA
PTFE (Polytetrafluoroethylene)
View on
Amazon

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Valve Cover Gasket

Brand Part Number Markets Notes Buy
MAHLE / CLEVITE VS50977S
🇺🇸 US 🇨🇦 CA
Molded Rubber
View on
Amazon
MAHLE / CLEVITE VS50977
🇺🇸 US 🇨🇦 CA
Set
Fitment notes — MAHLE / CLEVITE VS50977
Set
Use with # GS34084
View on
Amazon

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Valve Cover Grommet

Brand Part Number Markets Notes Buy
MAHLE / CLEVITE GS34084
🇺🇸 US 🇨🇦 CA
Contains 10 pcsKit
Fitment notes — MAHLE / CLEVITE GS34084
Contains 10 pcsKitSetMolded Rubber
View on
Amazon

This table covers the Valve Cover grommets.

Valve Guide

Brand Part Number Markets Notes Buy
QUALCAST 303229
🇺🇸 US 🇨🇦 CA
2.240 OAL. 0.3146 I.D. 0.5145 O.D.
View on
Amazon
SBI 1403229
🇺🇸 US 🇨🇦 CA
Intake and Exhaust0.3146 I.D.
Fitment notes — SBI 1403229
Intake and Exhaust0.3146 I.D.0.5145 O.D.2.240 Length1-P TypeNote: Install I.D. Chamfer Towards Cumbustion Chamber
View on
Amazon

This table covers the pressed-in bronze and cast-iron guides that align valve stems. Typical signs include oil smoke on startup, a guide that has gone oval, or a valve that no longer seats quietly. Guides are a machine-shop fit. Confirm stem diameter in the notes before ordering.

Valve Seat

Brand Part Number Markets Notes Buy
QUALCAST 21175050N
🇺🇸 US 🇨🇦 CA
INSERT
Fitment notes — QUALCAST 21175050N
INSERT
Exhaust1.406T Inner Diameter 1.750 Outer Diameter 0.250 Depth. Nickel
View on
Amazon
QUALCAST 21218751
🇺🇸 US 🇨🇦 CA
INSERT
Fitment notes — QUALCAST 21218751
INSERT
Intake1.950T I.D. 2.187 O.D. 0.250 Depth
View on
Amazon
SBI SB218751
🇺🇸 US 🇨🇦 CA
Intake2-3/16 O.D.
Fitment notes — SBI SB218751
Intake2-3/16 O.D.1.950T I.D.0.2250 Depth
View on
Amazon
SBI SB175070N
🇺🇸 US 🇨🇦 CA
Non-Magnetic
Fitment notes — SBI SB175070N
Non-Magnetic
Exhaust1-3/4 O.D.1.406T I.D.1/4 Depth
View on
Amazon

This table covers the Valve seats.

Valve Spring

Brand Part Number Markets Notes Buy
SBI 1601710
🇺🇸 US 🇨🇦 CA
Exhaust2.821 Length
Fitment notes — SBI 1601710
Exhaust2.821 Length1.250T O.D.0.822T I.DConicalNote: with Green StripeAlso Services Spring with Purple Stripe
View on
Amazon
SBI 1601709
🇺🇸 US 🇨🇦 CA
Intake2.679 Length
Fitment notes — SBI 1601709
Intake2.679 Length1.267T O.D.0.822T I.DConicalNote: with Yellow StripeAlso Services Spring with Pink Stripe
View on
Amazon

This table covers the springs that close each intake and exhaust valve. Typical signs include a sagging corner, a broken coil, or a clunk from the spring pocket. Replace springs in axle pairs and inspect the seats.

Valve Spring Retainer

Brand Part Number Markets Notes Buy
SBI 1611084
🇺🇸 US 🇨🇦 CA
Intake and ExhaustRetainer
View on
Amazon

This table covers the Valve Spring retainers.

Valve Spring Retainer Keeper

Brand Part Number Markets Notes Buy
SBI 1211083
🇺🇸 US 🇨🇦 CA
Intake and Exhaust0.2940 Length
Fitment notes — SBI 1211083
Intake and Exhaust0.2940 Length3 Round bead type0.2550 I.D.
View on
Amazon

This table covers the keepers that lock each valve-spring retainer to the stem.

Valve Stem Seal

Brand Part Number Markets Notes Buy
MAHLE / CLEVITE SS46156
🇺🇸 US 🇨🇦 CA
FluoroelastomerContains 16 PCS
Fitment notes — MAHLE / CLEVITE SS46156
FluoroelastomerContains 16 PCS
Intake and ExhaustPositive Type
View on
Amazon
SBI 1221519
🇺🇸 US 🇨🇦 CA
Intake and ExhaustViton Material
Fitment notes — SBI 1221519
Intake and ExhaustViton MaterialPositive TypeTop Hat Style5/16 Nominal Stem Diameter
View on
Amazon

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Buying Engine Parts for a 2024 Ford F59

On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.

  • Confirm you have the 7.3L V8 engine — every part on this page is matched to it.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Oil Filter and Camshaft Bearing .

Frequently Asked Questions

How many engine parts fit the 2024 Ford F59?

Our catalog currently lists 54 engine parts for the 2024 Ford F59 across 32 subcategories and 11 brands, covering the 7.3L V8 engine. Each part is matched to the engine(s) it fits.

What are the signs of engine problems on a 2024 Ford F59?

Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What oil viscosity is listed for the 2024 Ford F59?

Oil rows on this page include SAE 5W-30. Confirm the engine and the weight on the filler cap before you buy — high-mileage and standard fills can differ.

What should I replace at the same time?

Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2024 Ford F59 was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 2024 Ford F59?

Every part on this page is matched to the 7.3L V8 engine. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 2024 Ford F59

Engine Parts for Other Ford F59 Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.