2019 Ford Mustang Engine Parts

This table covers the chains that drive the balance shafts. Read more

One part is listed for the 2019 Ford Mustang — INA ZCC1120.

This table covers the Balance Shaft Chain tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

This group shows a single part: INA ZT91247.

This table covers the Balance Shaft sprockets. Read more

One part is listed for the 2019 Ford Mustang — INA ZSS1399.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

7 Conversion / Lower Gasket Set parts are listed for the 2019 Ford Mustang, from ELRING, APEX, FEL-PRO and 3 other brands. APEX ACS4080 carries the "Popular" badge.

This group includes APEX ACS4080, FEL-PRO CS26250 and AJUSA 54276600 and the remaining parts above.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

This group shows a single part: MAHLE / CLEVITE MS2245A.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

3 Crankshaft Repair Sleeve parts for the 2019 Ford Mustang come from 3 brands — BCA, NATIONAL and WJB / INMOTION PARTS.

Part numbers include BCA NS99145, NATIONAL 99145 and WJB / INMOTION PARTS WS99145.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

18 Crankshaft Seal parts for the 2019 Ford Mustang come from 11 brands — FEL-PRO, NATIONAL, WJB / INMOTION PARTS and 8 other brands. The "Popular" part is FEL-PRO BS40689.

This table covers the Crankshaft Seal covers. Read more

One part is listed for the 2019 Ford Mustang — DORMAN 635557.

This table covers the bolts that clamp the cylinder head to the block. Read more

6 Cylinder Head Bolt parts are listed for the 2019 Ford Mustang, from FEL-PRO, MAHLE / CLEVITE, AJUSA and 3 other brands. FEL-PRO ES72207 carries the "Popular" badge.

This group includes FEL-PRO ES72207, MAHLE / CLEVITE GS33755 and AJUSA 81062700 and the remaining parts above.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Cylinder Head Gasket parts are listed for the 2019 Ford Mustang, from AJUSA, APEX, FEL-PRO and 1 other brand.

Listed part numbers: AJUSA 10233300, APEX AHG1437 and FEL-PRO 26754PT, plus the other parts above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

2 Cylinder Head Gasket Set parts are listed for the 2019 Ford Mustang, from AJUSA and MAHLE / CLEVITE.

This group includes AJUSA 52520000 and MAHLE / CLEVITE HS55458A.

This table covers the Cylinder Head temperature sensors. Typical signs include hard cold starts, a fan that never comes on, or a gauge that disagrees with the scan tool. A sensor that reads open or shorted is usually the part; an implausible-but-smooth reading can be wiring. Read more

5 Cylinder Head Temperature Sensor parts for the 2019 Ford Mustang come from 5 brands — STANDARD MOTOR PRODUCTS, DORMAN, HOLSTEIN and 2 other brands. The "Popular" part is STANDARD MOTOR PRODUCTS TS653.

Listed part numbers: STANDARD MOTOR PRODUCTS TS653, DORMAN 926711 and HOLSTEIN 2CTS0135, plus the other parts above.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

This group shows a single part: KAT'S HEATERS 11409.

This table covers the Engine covers. Read more

2 Engine Cover parts are listed for the 2019 Ford Mustang, from TECHPRO and VARIOUS MFR.

Listed part numbers: TECHPRO FO1228164, plus the other parts above.

This table covers the Engine Cover grommets. Read more

This group shows a single part: DORMAN 49931.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

One part is listed for the 2019 Ford Mustang — AJUSA 50469100.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

2 Exhaust Valve parts for the 2019 Ford Mustang come from 2 brands — MELLING and SBI.

Part numbers include MELLING V5823 and SBI 13481SN.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

2 Harmonic Balancer parts are listed for the 2019 Ford Mustang, from ATP and DORMAN.

Listed part numbers: ATP 102450 and DORMAN 594726.

This table covers the Harmonic Balancer bolts. Read more

2 Harmonic Balancer Bolt parts for the 2019 Ford Mustang come from 2 brands — DORMAN and SKP.

Listed part numbers: DORMAN 926885 and SKP SK926885.

This table covers the wear sleeves used to restore a Harmonic Balancer seal surface. Read more

This group shows a single part: BCA NS88187.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Intake Manifold Gasket parts are listed for the 2019 Ford Mustang, from FEL-PRO, MAHLE / CLEVITE, APEX and 3 other brands. FEL-PRO MS97428 carries the "Popular" badge.

Listed part numbers: FEL-PRO MS97428, MAHLE / CLEVITE MS19948 and APEX AMS13330, plus the other parts above.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

2 Intake Valve parts for the 2019 Ford Mustang come from 2 brands — MELLING and SBI.

Part numbers include MELLING V5824 and SBI 13480.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

7 Motor Mount parts for the 2019 Ford Mustang come from 4 brands — DEA / MARMON RIDE CONTROL, ANCHOR, PIONEER and 1 other brand. The "Popular" part is DEA / MARMON RIDE CONTROL A5900.

Part numbers include DEA / MARMON RIDE CONTROL A5900, DEA / MARMON RIDE CONTROL A5901 and ANCHOR 3678, among others listed above.

This table covers the Motor Mount kits. Read more

2 Motor Mount Kit parts for the 2019 Ford Mustang come from ANCHOR.

This group includes ANCHOR 301149 and ANCHOR 301138.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

32 Oil parts for the 2019 Ford Mustang come from 7 brands — VALVOLINE, MOBIL, LIQUI MOLY and 4 other brands. The "Popular" part is MOBIL 125195. They are grouped as Full Synthetic, High Mileage (>75,000 Miles) and Synthetic Blend, with Full Synthetic the largest group at 19 parts from VALVOLINE, LIQUI MOLY, MOBIL and 3 other brands.

This table covers the heat exchangers that cool engine oil. Typical signs include oil at the cooler fittings, or coolant that looks like a milkshake. Pressure-test both circuits after a cooler swap — a leak here mixes oil and coolant. Read more

This group shows a single part: MOTORCRAFT YOC27.

This table covers the gaskets that seal the Oil Cooler. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Oil Cooler Gasket parts are listed for the 2019 Ford Mustang, from FEL-PRO and MAHLE / CLEVITE.

This group includes FEL-PRO 72709 and MAHLE / CLEVITE B32785.

This table covers the Oil Dipstick tubes. Read more

This group shows a single part: MOTORCRAFT EDPS41.

This table covers the drain plugs in the oil pan. Read more

6 Oil Drain Plug parts for the 2019 Ford Mustang come from 4 brands — DORMAN, AGS, ELRING and 1 other brand. The "Popular" part is DORMAN 090175.

The Economy section lists 1 option from DORMAN — the catalog's value-priced group. DORMAN 090175 is listed in this group.

In the Twist Drain grade, DORMAN supplies 1 part: grouped under the catalog's "Twist Drain" designation — the notes column spells out what sets them apart. A representative part number is DORMAN 092018.

4 further parts sit outside the graded sections, with the same engine-level match.

This group includes DORMAN 090175, DORMAN 092018 and DORMAN 090034 and the remaining parts above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Oil Drain Plug Gasket parts are listed for the 2019 Ford Mustang, from ELRING, FEL-PRO and MAHLE / CLEVITE.

This group includes ELRING 056130, FEL-PRO 72907 and MAHLE / CLEVITE B32655.

This table covers the caps on the oil filler neck. Read more

5 Oil Filler Cap parts for the 2019 Ford Mustang come from 5 brands — MOTORAD, CALORSTAT, GATES and 2 other brands. The "Popular" part is MOTORAD MO147.

This group includes MOTORAD MO147, CALORSTAT OC2330 and GATES 31295 and the remaining parts above.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

17 Oil Filter parts for the 2019 Ford Mustang come from 12 brands — BOSCH, VARIOUS MFR, WIX and 9 other brands. The "Popular" part is WIX 51348XP.

The Economy section: 5 options from BOSCH, FRAM, FVP and 2 other brands. BOSCH 72161WS is listed in this group.

The High Performance / Heavy Duty section lists 2 options from WIX and MOBIL — grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. WIX 51348XP is listed in this group.

In the Standard Replacement grade, MOTORCRAFT, ACDELCO, BOSCH and 5 other brands supply 10 parts: built to original-equipment specification. A representative part number is BOSCH 3330.

This table covers the Oil Filter Adapter Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

One part is listed for the 2019 Ford Mustang — MAHLE / CLEVITE B33819.

This table covers the seals at the Oil Filter Housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Oil Filter Housing Seal parts for the 2019 Ford Mustang come from ELRING.

Listed part numbers: ELRING 771190 and ELRING 059920.

This table covers the oil pans that hold the engine's oil sump. Read more

3 Oil Pan parts are listed for the 2019 Ford Mustang, from DORMAN, SKP and SPECTRA PREMIUM.

Listed part numbers: DORMAN 266045, SKP SK36675 and SPECTRA PREMIUM FP100A.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: VICTOR REINZ 703141410.

This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

2 Oil Pump parts for the 2019 Ford Mustang come from 2 brands — ENGINETECH and MELLING.

Listed part numbers: ENGINETECH EP494 and MELLING M494.

This table covers the chains that drive the oil pump. Read more

7 Oil Pump Chain parts are listed for the 2019 Ford Mustang, from PREFERRED COMPONENTS INC, MELLING, S.A. GEAR and 1 other brand. MELLING 1077 carries the "Popular" badge.

The Chain Only section lists 1 option from PREFERRED COMPONENTS INC — grouped under the catalog's "Chain Only" designation — the notes column spells out what sets them apart. PREFERRED COMPONENTS INC C953 is listed in this group.

In the Kit grade, MELLING, PREFERRED COMPONENTS INC and S.A. GEAR supply 3 parts: grouped under the catalog's "Kit" designation — the notes column spells out what sets them apart. A representative part number is MELLING 31077S.

The Standard Replacement section: 3 options from MELLING, S.A. GEAR and CLOYES. MELLING 1077 is listed in this group.

Listed part numbers: MELLING 1077, PREFERRED COMPONENTS INC C953 and MELLING 31077S, plus the other parts above.

This table covers the Oil Pump Chain tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

5 Oil Pump Chain Tensioner parts for the 2019 Ford Mustang come from 5 brands — CLOYES, FVP, MELLING and 2 other brands. The "Popular" part is CLOYES 95731.

Listed part numbers: CLOYES 95731 and MELLING BT7052, plus the other parts above.

This table covers the seals at the Oil Pump. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Oil Pump Seal parts are listed for the 2019 Ford Mustang, from ELRING and FEL-PRO.

Listed part numbers: ELRING 013640 and FEL-PRO 72705.

This table covers the Oil Pump sprockets. Read more

5 Oil Pump Sprocket parts are listed for the 2019 Ford Mustang, from CLOYES, FVP, MELLING and 2 other brands. CLOYES S1011 carries the "Popular" badge.

This group includes CLOYES S1011 and MELLING S1284 and the remaining parts above.

This table covers the Oil Temperature senders. Read more

One part is listed for the 2019 Ford Mustang — ÜRO PARTS AJ810031.

This table covers the rings that seal each piston to the cylinder wall. Read more

One part is listed for the 2019 Ford Mustang — HASTINGS MANUFACTURING SN4191.

This table covers the timing chains that keep the cams in time with the crank. Read more

6 Timing Chain parts are listed for the 2019 Ford Mustang, from MELLING, S.A. GEAR, CLOYES and 3 other brands. MELLING 1076 carries the "Popular" badge.

Part numbers include MELLING 1076, S.A. GEAR C1119 and CLOYES C744, among others listed above.

This table covers kits that group a timing chain with the related tensioners and guides. Read more

21 Timing Chain & Component Kit parts for the 2019 Ford Mustang come from 9 brands — S.A. GEAR, MELLING, INA and 6 other brands. The "Popular" part is S.A. GEAR 76351.

The Economy section: 10 options from S.A. GEAR, ULTRA-POWER, SKP and 2 other brands. S.A. GEAR 76351 is listed in this group.

Standard Replacement: 11 parts, from MELLING, INA, CLOYES and 1 other brand. A representative part number is CLOYES 90744SAX.

This table covers the guides and dampers that keep the timing chain on its path. Read more

8 Timing Chain Guide / Damper parts are listed for the 2019 Ford Mustang, from MELLING, S.A. GEAR, CLOYES and 1 other brand. MELLING BG7040 carries the "Popular" badge.

Part numbers include MELLING BG7040, S.A. GEAR 71190 and CLOYES 95730, among others listed above.

This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

6 Timing Chain Tensioner parts for the 2019 Ford Mustang come from 6 brands — ENGINETECH, S.A. GEAR, CLOYES and 3 other brands. The "Popular" part is ENGINETECH TT5514.

This group includes ENGINETECH TT5514, S.A. GEAR 9454 and CLOYES 95514 and the remaining parts above.

This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: MAHLE / CLEVITE JV5286.

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Timing Cover Seal parts for the 2019 Ford Mustang come from 2 brands — MAHLE / CLEVITE and SKF.

Part numbers include MAHLE / CLEVITE 68072 and SKF 14671.

This table covers the crankshaft sprockets that drive the timing chain or belt. Read more

6 Timing Crank Sprocket parts for the 2019 Ford Mustang come from 6 brands — MELLING, S.A. GEAR, CLOYES and 3 other brands. The "Popular" part is MELLING S1313.

Listed part numbers: MELLING S1313, S.A. GEAR S1400 and CLOYES S1091, plus the other parts above.

This table covers the turbochargers that compress intake air. Read more

5 Turbocharger parts for the 2019 Ford Mustang come from 5 brands — GPD, MOTORCRAFT, ROTOMASTER and 2 other brands. The "Popular" part is GPD 2511551.

The New section lists 4 options from GPD, MOTORCRAFT, ROTOMASTER and 1 other brand — brand-new units rather than rebuilt ones. GPD 2511551 is listed in this group.

The Remanufactured section lists 1 option from TERREPOWER — factory-rebuilt units with new wear components. TERREPOWER G1044 is listed in this group.

Part numbers include GPD 2511551, MOTORCRAFT TC46 and ROTOMASTER A1220115N, among others listed above.

This table covers the Turbocharger Boost sensors. Typical signs include a warning lamp, a stored code, or a reading that drops out when the harness is wiggled. Inspect the connector and ground before replacing the sensor — wiring faults are often condemned as bad sensors. Read more

2 Turbocharger Boost Sensor parts are listed for the 2019 Ford Mustang, from NTK and WELLS.

This group includes NTK MA0057 and WELLS 5S13390.

This table covers the Turbocharger Coolant lines. Typical signs include a wet fitting, a rusted pipe, or a pressure loss in this circuit. Flare or thread the new line the way the notes specify; a kinked replacement will fail early. Read more

4 Turbocharger Coolant Line parts for the 2019 Ford Mustang come from 2 brands — DORMAN and GATES.

This group includes DORMAN 667784, DORMAN 667787 and DORMAN 667712 and the remaining parts above.

This table covers the Turbocharger Diverter / Bypass valves. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

4 Turbocharger Diverter / Bypass Valve parts for the 2019 Ford Mustang come from 4 brands — DORMAN, PIERBURG, SKP and 1 other brand.

Listed part numbers: DORMAN 667445, PIERBURG 704615030 and SKP SKTBV518, plus the other parts above.

This table covers the gaskets that seal the Turbocharger. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Turbocharger Gasket parts are listed for the 2019 Ford Mustang, from AJUSA, ELRING and MAHLE / CLEVITE.

This group includes AJUSA JTC12201, ELRING 760480 and MAHLE / CLEVITE GS34047.

This table covers the fasteners that mount the turbocharger. Read more

3 Turbocharger Mounting Hardware parts are listed for the 2019 Ford Mustang, from DORMAN and ELRING.

This group includes DORMAN 32107, DORMAN 675229 and ELRING 771260.

This table covers the Turbocharger Oil filters. Typical signs include restricted flow — long cranking, weak airflow, or dirty fluid after a short interval. Seat the new filter so it cannot bypass, and use the grade the notes call for. Read more

This group shows a single part: GATES TF1002.

This table covers the Turbocharger Wastegate Solenoid actuators. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

This group shows a single part: BOSCH 0280751067.