2022 Ford Mustang Engine Parts

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Camshaft Seal parts for the 2022 Ford Mustang come from MAHLE / CLEVITE.

This group includes MAHLE / CLEVITE GS33868 and MAHLE / CLEVITE GS34060.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

6 Conversion / Lower Gasket Set parts are listed for the 2022 Ford Mustang, from AJUSA, ELRING and MAHLE / CLEVITE.

Listed part numbers: AJUSA 54276600, AJUSA 54326600 and ELRING 770900, plus the other parts above.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

This group shows a single part: MAHLE / CLEVITE MS2292A.

This table covers the Crankshaft Main Bearing Cap bolts. Read more

One part is listed for the 2022 Ford Mustang — ARP 1565803.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

10 Crankshaft Seal parts for the 2022 Ford Mustang come from 3 brands — AJUSA, ELRING and MAHLE / CLEVITE. The "Popular" part is MAHLE / CLEVITE 67756.

This table covers the Crankshaft Seal covers. Read more

One part is listed for the 2022 Ford Mustang — DORMAN 635557.

This table covers the bolts that clamp the cylinder head to the block. Read more

6 Cylinder Head Bolt parts are listed for the 2022 Ford Mustang, from AJUSA, MAHLE / CLEVITE, ELRING and 1 other brand.

Listed part numbers: AJUSA 81062700, AJUSA 81084300 and ELRING 756750, plus the other parts above.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

14 Cylinder Head Gasket parts are listed for the 2022 Ford Mustang, from AJUSA, ELRING, MAHLE / CLEVITE and 1 other brand. MAHLE / CLEVITE 55488 carries the "Popular" badge.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

5 Cylinder Head Gasket Set parts are listed for the 2022 Ford Mustang, from AJUSA, MAHLE / CLEVITE and ELRING.

Listed part numbers: AJUSA 52520000, AJUSA 52626600 and ELRING 856230, plus the other parts above.

This table covers the Cylinder Head temperature sensors. Typical signs include hard cold starts, a fan that never comes on, or a gauge that disagrees with the scan tool. A sensor that reads open or shorted is usually the part; an implausible-but-smooth reading can be wiring. Read more

7 Cylinder Head Temperature Sensor parts for the 2022 Ford Mustang come from 5 brands — STANDARD MOTOR PRODUCTS, WELLS, DORMAN and 2 other brands. The "Popular" part is STANDARD MOTOR PRODUCTS TS653.

Part numbers include STANDARD MOTOR PRODUCTS TS653, DORMAN 926711 and HOLSTEIN 2CTS0135, among others listed above.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

This group shows a single part: MOTORAD TA9213.

This table covers the Engine covers. Read more

8 Engine Cover parts are listed for the 2022 Ford Mustang, from TECHPRO and VARIOUS MFR.

Part numbers include TECHPRO FO1228164, TECHPRO FO1228172 and TECHPRO FO1228190, among others listed above.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

AJUSA supplies both parts for the 2022 Ford Mustang.

This group includes AJUSA 50469100 and AJUSA 50559700.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

3 Exhaust Valve parts for the 2022 Ford Mustang come from 2 brands — MELLING and SBI.

Part numbers include MELLING V5823, MELLING V3488 and SBI 13481SN.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

3 Harmonic Balancer parts are listed for the 2022 Ford Mustang, from ATP, DAYCO and DORMAN.

Part numbers include ATP 102450, DAYCO PB1638N and DORMAN 594726.

This table covers the Harmonic Balancer bolts. Read more

4 Harmonic Balancer Bolt parts for the 2022 Ford Mustang come from 3 brands — DORMAN, ARP and SKP.

Part numbers include ARP 1562502, DORMAN 926885 and DORMAN 595002, among others listed above.

This table covers the Intake manifolds. Typical signs include an exhaust tick, a vacuum leak, or a gasket that has burned through. Replace the gaskets and hardware; a warped flange will leak with a new gasket alone. Read more

This group shows a single part: SKP SK3Z9424.

This table covers the Intake Manifold actuators. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

STANDARD MOTOR PRODUCTS supplies the 3 Intake Manifold Actuator parts for the 2022 Ford Mustang.

Listed part numbers: STANDARD MOTOR PRODUCTS IMA139, STANDARD MOTOR PRODUCTS IMA120 and STANDARD MOTOR PRODUCTS IMA121.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

9 Intake Manifold Gasket parts are listed for the 2022 Ford Mustang, from ELRING, MAHLE / CLEVITE, AJUSA and 1 other brand. MAHLE / CLEVITE MS20595 carries the "Popular" badge.

This group includes MAHLE / CLEVITE MS20595, AJUSA 13270500 and ELRING 756820 and the remaining parts above.

This table covers the Intake Manifold Runner Control Valve solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

One part is listed for the 2022 Ford Mustang — STANDARD MOTOR PRODUCTS RCS109.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Intake Plenum Gasket parts for the 2022 Ford Mustang come from 2 brands — FEL-PRO and ULTRA-POWER.

Part numbers include FEL-PRO MS97205, among others listed above.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

4 Intake Valve parts for the 2022 Ford Mustang come from 3 brands — MELLING, ENGINETECH and SBI.

This group includes ENGINETECH V2064, MELLING V5824 and MELLING V3487 and the remaining parts above.

This table covers the long-block engine assemblies (block, crank, heads). Read more

One part is listed for the 2022 Ford Mustang — MOTORCRAFT KR3Z6006B.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

11 Motor Mount parts for the 2022 Ford Mustang come from 5 brands — DEA / MARMON RIDE CONTROL, ANCHOR, WESTAR and 2 other brands. The "Popular" part is SKP SKM3250.

The Economy section lists 1 option from SKP — the catalog's value-priced group. SKP SKM3250 is listed in this group.

In the Standard Replacement grade, DEA / MARMON RIDE CONTROL, ANCHOR, PIONEER and 1 other brand supply 6 parts: built to original-equipment specification. A representative part number is ANCHOR 3250.

4 further parts sit outside the graded sections, with the same engine-level match.

This table covers the Motor Mount kits. Read more

3 Motor Mount Kit parts for the 2022 Ford Mustang come from ANCHOR.

Listed part numbers: ANCHOR 301150, ANCHOR 301148 and ANCHOR 300069.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

37 Oil parts for the 2022 Ford Mustang come from 7 brands — VALVOLINE, MOBIL, LIQUI MOLY and 4 other brands. The "Popular" part is MOBIL 125195. Full Synthetic, High Mileage (>75,000 Miles) and Synthetic Blend are all represented, and Full Synthetic alone accounts for 24 parts.

This table covers the heat exchangers that cool engine oil. Typical signs include oil at the cooler fittings, or coolant that looks like a milkshake. Pressure-test both circuits after a cooler swap — a leak here mixes oil and coolant. Read more

4 Oil Cooler parts for the 2022 Ford Mustang come from 2 brands — MOTORCRAFT and STANDARD MOTOR PRODUCTS.

This group includes MOTORCRAFT YOC27, MOTORCRAFT YOC10 and MOTORCRAFT YOC13 and the remaining parts above.

This table covers the gaskets that seal the Oil Cooler. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2022 Ford Mustang — MAHLE / CLEVITE B32785.

This table covers the seals at the Oil Cooler. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2022 Ford Mustang — MAHLE / CLEVITE B33281.

This table covers the Oil Dipstick tubes. Read more

5 Oil Dipstick / Tube parts for the 2022 Ford Mustang come from MOTORCRAFT.

Part numbers include MOTORCRAFT EDPS41, MOTORCRAFT EDPST31 and MOTORCRAFT EDPS56, among others listed above.

This table covers the drain plugs in the oil pan. Read more

8 Oil Drain Plug parts for the 2022 Ford Mustang come from 3 brands — DORMAN, ELRING and ENGINETECH.

Listed part numbers: DORMAN 090034, DORMAN 090175 and DORMAN 097826, plus the other parts above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Oil Drain Plug Gasket parts are listed for the 2022 Ford Mustang, from MAHLE / CLEVITE, ELRING and VICTOR REINZ.

Listed part numbers: ELRING 056130, MAHLE / CLEVITE B32655 and MAHLE / CLEVITE B33828, plus the other parts above.

This table covers the caps on the oil filler neck. Read more

8 Oil Filler Cap parts for the 2022 Ford Mustang come from 5 brands — MOTORCRAFT, MOTORAD, CALORSTAT and 2 other brands. The "Popular" part is MOTORAD MO147.

Listed part numbers: MOTORAD MO147, CALORSTAT OC2330 and GATES 31295, plus the other parts above.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

36 Oil Filter parts for the 2022 Ford Mustang come from 13 brands — VARIOUS MFR, WIX, ACDELCO and 10 other brands. The "Popular" part is VARIOUS MFR PG8154. They are grouped as Economy, High Performance / Heavy Duty and Standard Replacement, with Standard Replacement the largest group at 20 parts from MOTORCRAFT, ACDELCO, WIX and 5 other brands.

This table covers the Oil Filter Adapter Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

4 Oil Filter Adapter Gasket / O-Ring parts are listed for the 2022 Ford Mustang, from MAHLE / CLEVITE, FEL-PRO and VICTOR REINZ.

Part numbers include FEL-PRO 71561, MAHLE / CLEVITE B33819 and MAHLE / CLEVITE B33737, among others listed above.

This table covers the seals at the Oil Filter Housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Oil Filter Housing Seal parts for the 2022 Ford Mustang come from ELRING.

This group includes ELRING 771190, ELRING 059920 and ELRING B35680.

This table covers the Oil Level sensors. Typical signs include a warning lamp, a stored code, or a reading that drops out when the harness is wiggled. Inspect the connector and ground before replacing the sensor — wiring faults are often condemned as bad sensors. Read more

2 Oil Level Sensor parts for the 2022 Ford Mustang come from 2 brands — MOTORCRAFT and STANDARD MOTOR PRODUCTS.

Part numbers include MOTORCRAFT OLS2 and STANDARD MOTOR PRODUCTS FLS310.

This table covers the oil pans that hold the engine's oil sump. Read more

3 Oil Pan parts are listed for the 2022 Ford Mustang, from DORMAN, SKP and SPECTRA PREMIUM.

This group includes DORMAN 266045, SKP SK36675 and SPECTRA PREMIUM FP100A.

This table covers the Oil Pan bolts. Read more

This group shows a single part: DORMAN 990662.