2024 Ford Mustang Engine Parts

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Camshaft Seal parts for the 2024 Ford Mustang come from MAHLE / CLEVITE.

Part numbers include MAHLE / CLEVITE GS33868 and MAHLE / CLEVITE GS34060.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

2 Conversion / Lower Gasket Set parts are listed for the 2024 Ford Mustang, from AJUSA and MAHLE / CLEVITE.

This group includes AJUSA 54351400 and MAHLE / CLEVITE CS55488.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

This group shows a single part: MAHLE / CLEVITE MS2292A.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Crankshaft Seal parts for the 2024 Ford Mustang come from 2 brands — AJUSA and MAHLE / CLEVITE.

This group includes AJUSA 15108100, AJUSA 15115600 and MAHLE / CLEVITE 68115.

This table covers the bolts that clamp the cylinder head to the block. Read more

2 Cylinder Head Bolt parts are listed for the 2024 Ford Mustang, from AJUSA and MAHLE / CLEVITE.

Listed part numbers: AJUSA 81084300 and MAHLE / CLEVITE GS34048.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

7 Cylinder Head Gasket parts are listed for the 2024 Ford Mustang, from AJUSA, MAHLE / CLEVITE and FEL-PRO. MAHLE / CLEVITE 55488 carries the "Popular" badge.

Part numbers include MAHLE / CLEVITE 55488, MAHLE / CLEVITE 55489 and AJUSA 10268500, among others listed above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

One part is listed for the 2024 Ford Mustang — AJUSA 52691100.

This table covers the Cylinder Head temperature sensors. Typical signs include hard cold starts, a fan that never comes on, or a gauge that disagrees with the scan tool. A sensor that reads open or shorted is usually the part; an implausible-but-smooth reading can be wiring. Read more

2 Cylinder Head Temperature Sensor parts for the 2024 Ford Mustang come from 2 brands — STANDARD MOTOR PRODUCTS and WELLS.

Part numbers include STANDARD MOTOR PRODUCTS TS685 and WELLS 5S17550.

This table covers the Engine covers. Read more

9 Engine Cover parts are listed for the 2024 Ford Mustang, from TECHPRO and VARIOUS MFR. VARIOUS MFR FO1228202 carries the "Popular" badge.

This group includes VARIOUS MFR FO1228202 and TECHPRO FO1228203 and the remaining parts above.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

One part is listed for the 2024 Ford Mustang — AJUSA 50610600.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

This group shows a single part: MELLING V3488.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

One part is listed for the 2024 Ford Mustang — DAYCO PB1638N.

This table covers the Harmonic Balancer bolts. Read more

This group shows a single part: DORMAN 595002.

This table covers the Intake Manifold actuators. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

One part is listed for the 2024 Ford Mustang — STANDARD MOTOR PRODUCTS IMA139.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Intake Manifold Gasket parts are listed for the 2024 Ford Mustang, from AJUSA and MAHLE / CLEVITE.

This group includes AJUSA 13337500 and MAHLE / CLEVITE MS20595.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

This group shows a single part: MELLING V3487.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

8 Motor Mount parts for the 2024 Ford Mustang come from 4 brands — ANCHOR, DEA / MARMON RIDE CONTROL, SKP and 1 other brand. The "Popular" part is ANCHOR 3678.

The Economy section lists 1 option from SKP — the catalog's value-priced group. SKP SKM3250 is listed in this group.

In the Standard Replacement grade, ANCHOR and DEA / MARMON RIDE CONTROL supply 2 parts: built to original-equipment specification. A representative part number is ANCHOR 3250.

5 further parts sit outside the graded sections, with the same engine-level match.

Listed part numbers: ANCHOR 3678, SKP SKM3250 and ANCHOR 3250, plus the other parts above.

This table covers the Motor Mount kits. Read more

2 Motor Mount Kit parts for the 2024 Ford Mustang come from ANCHOR.

Part numbers include ANCHOR 301150 and ANCHOR 300069.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

30 Oil parts for the 2024 Ford Mustang come from 7 brands — VALVOLINE, MOBIL, LIQUI MOLY and 4 other brands. The "Popular" part is MOBIL 125195. Full Synthetic, High Mileage (>75,000 Miles) and Synthetic Blend are all represented, and Full Synthetic alone accounts for 18 parts.

This table covers the heat exchangers that cool engine oil. Typical signs include oil at the cooler fittings, or coolant that looks like a milkshake. Pressure-test both circuits after a cooler swap — a leak here mixes oil and coolant. Read more

This group shows a single part: MOTORCRAFT YOC18.

This table covers the seals at the Oil Cooler. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2024 Ford Mustang — MAHLE / CLEVITE B33281.

This table covers the Oil Dipstick tubes. Read more

2 Oil Dipstick / Tube parts for the 2024 Ford Mustang come from MOTORCRAFT.

Listed part numbers: MOTORCRAFT EDPS80 and MOTORCRAFT EDPS82.

This table covers the drain plugs in the oil pan. Read more

2 Oil Drain Plug parts for the 2024 Ford Mustang come from DORMAN.

Part numbers include DORMAN 090034 and DORMAN 090175.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Oil Drain Plug Gasket parts are listed for the 2024 Ford Mustang, from AJUSA and MAHLE / CLEVITE.

This group includes AJUSA 01148400 and MAHLE / CLEVITE B32655.

This table covers the caps on the oil filler neck. Read more

3 Oil Filler Cap parts for the 2024 Ford Mustang come from 2 brands — MOTORCRAFT and MOTORAD.

Part numbers include MOTORAD MO201, MOTORCRAFT EC791 and MOTORCRAFT EC793.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

25 Oil Filter parts for the 2024 Ford Mustang come from 12 brands — WIX, ACDELCO, FVP and 9 other brands. The "Popular" part is WIX WL10290XP.

The Economy section: 9 options from FRAM, FVP, PRO-TEC and 2 other brands. CHAMP / LUBER-FINER PH10064 is listed in this group.

The High Performance / Heavy Duty section lists 4 options from WIX and MOBIL — grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. WIX WL10290XP is listed in this group.

Standard Replacement: 12 parts, from ACDELCO, WIX, MOTORCRAFT and 5 other brands. A representative part number is ACDELCO PF64.

This table covers the Oil Filter Adapter Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

3 Oil Filter Adapter Gasket / O-Ring parts are listed for the 2024 Ford Mustang, from FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.

Listed part numbers: FEL-PRO 71561, MAHLE / CLEVITE B33737 and VICTOR REINZ 712028400.

This table covers the oil pans that hold the engine's oil sump. Read more

One part is listed for the 2024 Ford Mustang — SPECTRA PREMIUM FP100A.

This table covers the Oil Pan bolts. Read more

This group shows a single part: DORMAN 990662.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Oil Pan Gasket parts for the 2024 Ford Mustang come from 4 brands — AJUSA, FEL-PRO, MAHLE / CLEVITE and 1 other brand.

Listed part numbers: AJUSA 14115200, FEL-PRO OS30850R and MAHLE / CLEVITE OS32601, plus the other parts above.

This table covers the Oil Pump Control Valve solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

One part is listed for the 2024 Ford Mustang — DORMAN 926542.

This table covers the timing chains that keep the cams in time with the crank. Read more

3 Timing Chain parts are listed for the 2024 Ford Mustang, from MELLING and MOTORCRAFT.

Part numbers include MELLING 1037, MELLING 1069 and MOTORCRAFT TCRK14.

This table covers kits that group a timing chain with the related tensioners and guides. Read more

3 Timing Chain & Component Kit parts for the 2024 Ford Mustang come from 2 brands — MELLING and MOTORCRAFT.

Listed part numbers: MELLING 31069SAX, MELLING 31069SAXWP and MOTORCRAFT TCRK11.

This table covers the guides and dampers that keep the timing chain on its path. Read more

MELLING supplies the 3 Timing Chain Guide / Damper parts for the 2024 Ford Mustang.

This group includes MELLING BT7033, MELLING BG7034 and MELLING BG7035.

This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

3 Timing Chain Tensioner parts for the 2024 Ford Mustang come from 2 brands — MELLING and INA.

Listed part numbers: INA ZT0692, MELLING BT5108 and MELLING BT7032.

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: MAHLE / CLEVITE 68114.

This table covers the Turbocharger Boost sensors. Typical signs include a warning lamp, a stored code, or a reading that drops out when the harness is wiggled. Inspect the connector and ground before replacing the sensor — wiring faults are often condemned as bad sensors. Read more

2 Turbocharger Boost Sensor parts are listed for the 2024 Ford Mustang, from WELLS and MOTORCRAFT.

Economy: 1 part, from WELLS. A representative part number is WELLS 5S15716.

The Standard Replacement section: 1 option from MOTORCRAFT. MOTORCRAFT CX2621 is listed in this group.

Listed part numbers: WELLS 5S15716 and MOTORCRAFT CX2621.

This table covers the Turbocharger Oil filters. Typical signs include restricted flow — long cranking, weak airflow, or dirty fluid after a short interval. Seat the new filter so it cannot bypass, and use the grade the notes call for. Read more

This group shows a single part: GATES TF1005.

This table covers the Turbocharger Oil lines. Typical signs include a wet fitting, a rusted pipe, or a pressure loss in this circuit. Flare or thread the new line the way the notes specify; a kinked replacement will fail early. Read more

This group shows a single part: MOTORCRAFT OSL36.

This table covers the Turbocharger Oil Line Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

This group shows a single part: MAHLE / CLEVITE B33892.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Valve Cover Gasket parts for the 2024 Ford Mustang come from 2 brands — AJUSA and MAHLE / CLEVITE.

Listed part numbers: AJUSA 56104400, AJUSA 56105400 and MAHLE / CLEVITE VS50968.

This table covers the pressed-in bronze and cast-iron guides that align valve stems. Typical signs include oil smoke on startup, a guide that has gone oval, or a valve that no longer seats quietly. Guides are a machine-shop fit. Confirm stem diameter in the notes before ordering. Read more

This group shows a single part: SBI 1403166.

This table covers the lifters / tappets that transfer cam motion to the valves. Read more

4 Valve Lifter parts for the 2024 Ford Mustang come from 4 brands — AJUSA, ENGINETECH, SBI and 1 other brand.

Listed part numbers: AJUSA 85023800, ENGINETECH L5000 and SBI VL575, plus the other parts above.

This table covers the springs that close each intake and exhaust valve. Typical signs include a sagging corner, a broken coil, or a clunk from the spring pocket. Replace springs in axle pairs and inspect the seats. Read more

One part is listed for the 2024 Ford Mustang — SBI 1601717.

This table covers the Valve Spring retainers. Read more

One part is listed for the 2024 Ford Mustang — MELLING VSR715.

This table covers the keepers that lock each valve-spring retainer to the stem. Read more

2 Valve Spring Retainer Keeper parts are listed for the 2024 Ford Mustang, from MELLING and SBI.

Part numbers include MELLING VL1120 and SBI 1211082.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Valve Stem Seal parts for the 2024 Ford Mustang come from 3 brands — AJUSA, MAHLE / CLEVITE and SBI.

Listed part numbers: AJUSA 12048200, AJUSA 57095100 and MAHLE / CLEVITE SS46149, plus the other parts above.

This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

4 Variable Valve Timing (VVT) Solenoid / Actuator parts for the 2024 Ford Mustang come from 3 brands — WELLS, HOLSTEIN and MELLING.

The Economy section: 3 options from WELLS and HOLSTEIN. HOLSTEIN 2VTS0049 is listed in this group.

Standard Replacement: 1 part, from MELLING. A representative part number is MELLING VCTS1023.

This group includes HOLSTEIN 2VTS0049, WELLS 2T1009 and WELLS 2T1313 and the remaining parts above.

This table covers the Variable Valve Timing (VVT) Sprocket bolts. Read more

2 Variable Valve Timing (VVT) Sprocket Bolt parts are listed for the 2024 Ford Mustang, from CLOYES and MELLING.

Part numbers include CLOYES VCB122 and MELLING VCTB1021.