2022 Ford Police Suv Engine Parts

This table covers the camshafts that open the valves. Read more

2 Camshaft parts for the 2022 Ford Police Suv come from 2 brands — ENGINETECH and MELLING.

This group includes ENGINETECH ES1408 and MELLING MC1408.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Camshaft Seal parts are listed for the 2022 Ford Police Suv, from MAHLE / CLEVITE and FEL-PRO.

Listed part numbers: FEL-PRO TCS46239, MAHLE / CLEVITE GS34060 and MAHLE / CLEVITE GS33868, plus the other parts above.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

This group shows a single part: SEALED POWER 65080A.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

7 Crankshaft Seal parts are listed for the 2022 Ford Police Suv, from FEL-PRO, MAHLE / CLEVITE, APEX and 2 other brands. FEL-PRO TCS46117 carries the "Popular" badge. 1 part fits every engine; the other 6 are engine-specific.

This group includes FEL-PRO TCS46117, FEL-PRO BS40729 and APEX ATC11360 and the remaining parts above.

This table covers the Cylinder Head Alignment Dowel pins. Read more

This group shows a single part: MAHLE / CLEVITE GS34087.

This table covers the bolts that clamp the cylinder head to the block. Read more

This group shows a single part: MAHLE / CLEVITE GS33715.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

9 Cylinder Head Gasket parts for the 2022 Ford Police Suv come from 3 brands — ELRING, FEL-PRO and MAHLE / CLEVITE. The "Popular" part is ELRING 455031.

Listed part numbers: ELRING 455031, ELRING 455081 and ELRING 248811, plus the other parts above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

2 Cylinder Head Gasket Set parts for the 2022 Ford Police Suv come from 2 brands — ELRING and MAHLE / CLEVITE. 1 part fits every engine; the other 1 is engine-specific.

This group includes ELRING 856500 and MAHLE / CLEVITE HS55551.

This table covers the Cylinder Head temperature sensors. Typical signs include hard cold starts, a fan that never comes on, or a gauge that disagrees with the scan tool. A sensor that reads open or shorted is usually the part; an implausible-but-smooth reading can be wiring. Read more

7 Cylinder Head Temperature Sensor parts are listed for the 2022 Ford Police Suv, from STANDARD MOTOR PRODUCTS, DORMAN, HOLSTEIN and 3 other brands. STANDARD MOTOR PRODUCTS TS653 carries the "Popular" badge. 2 parts fit every engine; the other 5 are engine-specific.

Part numbers include STANDARD MOTOR PRODUCTS TS653, DORMAN 926711 and HOLSTEIN 2CTS0135, among others listed above.

This table covers the Engine covers. Read more

This group shows a single part: VARIOUS MFR FO1228180.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

3 Exhaust Valve parts are listed for the 2022 Ford Police Suv, from ENGINETECH, MELLING and SBI.

This group includes ENGINETECH V4499, MELLING V3226 and SBI 13226.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

This group shows a single part: DAYCO PB1722N.

This table covers the Harmonic Balancer bolts. Read more

One part is listed for the 2022 Ford Police Suv — DORMAN 595001.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Intake Manifold Gasket parts for the 2022 Ford Police Suv come from MAHLE / CLEVITE.

Listed part numbers: MAHLE / CLEVITE MS19560 and MAHLE / CLEVITE MS19931.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Intake Plenum Gasket parts are listed for the 2022 Ford Police Suv, from FEL-PRO and MAHLE / CLEVITE.

Part numbers include FEL-PRO MS97214 and MAHLE / CLEVITE MS19928.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

7 Intake Valve parts are listed for the 2022 Ford Police Suv, from SBI, ENGINETECH and MELLING.

Listed part numbers: ENGINETECH V2730, ENGINETECH V4500 and MELLING V3428, plus the other parts above.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

8 Motor Mount parts are listed for the 2022 Ford Police Suv, from ANCHOR and DEA / MARMON RIDE CONTROL.

This group includes ANCHOR 3699, ANCHOR 3709 and ANCHOR 3728 and the remaining parts above.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

31 Oil parts are listed for the 2022 Ford Police Suv, from MOBIL, MOTORCRAFT, PENTOSIN and 1 other brand. MOBIL 125195 carries the "Popular" badge. Grades run from Full Synthetic through Synthetic Blend; Full Synthetic is the most populated section, led by MOBIL, PENTOSIN, IDEMITSU and 1 other brand.

This table covers the heat exchangers that cool engine oil. Typical signs include oil at the cooler fittings, or coolant that looks like a milkshake. Pressure-test both circuits after a cooler swap — a leak here mixes oil and coolant. Read more

3 Oil Cooler parts are listed for the 2022 Ford Police Suv, from MOTORCRAFT and STANDARD MOTOR PRODUCTS.

Listed part numbers: MOTORCRAFT YOC9, MOTORCRAFT YOC10 and STANDARD MOTOR PRODUCTS OCK97.

This table covers the gaskets that seal the Oil Cooler. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: ELRING 920070.

This table covers the Oil Dipstick tubes. Read more

MOTORCRAFT supplies both parts for the 2022 Ford Police Suv.

Listed part numbers: MOTORCRAFT EDPS62 and MOTORCRAFT EDPS64.

This table covers the drain plugs in the oil pan. Read more

DORMAN supplies the 5 Oil Drain Plug parts for the 2022 Ford Police Suv.

This group includes DORMAN 097826, DORMAN 097826HPCD and DORMAN 097826HP and the remaining parts above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: MAHLE / CLEVITE B32655.

This table covers the caps on the oil filler neck. Read more

5 Oil Filler Cap parts are listed for the 2022 Ford Police Suv, from MOTORAD, MOTORCRAFT and GATES.

Part numbers include GATES 31295, MOTORAD MO201 and MOTORAD MO202, among others listed above.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

28 Oil Filter parts are listed for the 2022 Ford Police Suv, from VARIOUS MFR, WIX, ACDELCO and 11 other brands. PRO-TEC PXL10050 carries the "Popular" badge. Economy, High Performance / Heavy Duty and Standard Replacement are all represented, and Standard Replacement alone accounts for 17 parts.

This table covers the Oil Filter Adapter Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

2 Oil Filter Adapter Gasket / O-Ring parts for the 2022 Ford Police Suv come from 2 brands — MAHLE / CLEVITE and VICTOR REINZ.

Listed part numbers: MAHLE / CLEVITE B32674 and VICTOR REINZ 712474300.

This table covers the Oil Filter covers. Read more

3 Oil Filter Cover parts for the 2022 Ford Police Suv come from 3 brands — AUTOTECNICA, DORMAN and MOTORAD.

Listed part numbers: AUTOTECNICA FD1416939PRM, DORMAN 921157 and MOTORAD MO363.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Oil Pan Gasket parts are listed for the 2022 Ford Police Suv, from MAHLE / CLEVITE and VICTOR REINZ.

Part numbers include MAHLE / CLEVITE OS32596 and VICTOR REINZ 703141410.

This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

2 Oil Pump parts are listed for the 2022 Ford Police Suv, from SKP and MELLING.

In the Economy grade, SKP supplies 1 part: the catalog's value-priced group. A representative part number is SKP SKM490.

The Standard Replacement section lists 1 option from MELLING — built to original-equipment specification. MELLING M490 is listed in this group.

This group includes SKP SKM490 and MELLING M490.

This table covers the gaskets that seal the Oil Pump. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: ELRING 919910.

This table covers the pickup tubes and screens that feed the oil pump. Read more

This group shows a single part: MOTORCRAFT EPT3.

This table covers the rings that seal each piston to the cylinder wall. Read more

5 Piston Ring parts for the 2022 Ford Police Suv come from 2 brands — HASTINGS MANUFACTURING and ENGINETECH.

In the Premium grade, ENGINETECH supplies 2 parts: a step above OE specification in materials, tolerances or warranty terms. A representative part number is ENGINETECH S33626STD.

Standard Replacement: 2 parts, from HASTINGS MANUFACTURING. A representative part number is HASTINGS MANUFACTURING SN5318.

1 further part sits outside the graded sections, with the same engine-level match.

Part numbers include ENGINETECH S33626STD, ENGINETECH S3362650 and HASTINGS MANUFACTURING SN5318, among others listed above.

This table covers the rocker arms that transfer cam motion to the valves. Read more

One part is listed for the 2022 Ford Police Suv — INA VF02551.

This table covers the Timing belts. Typical signs include squeal on cold start, cracked ribs, or glazing. Spin the tensioner and idlers by hand while the belt is off. Read more

This group shows a single part: MOTORCRAFT TCRK13.

This table covers the timing chains that keep the cams in time with the crank. Read more

6 Timing Chain parts for the 2022 Ford Police Suv come from 3 brands — MELLING, S.A. GEAR and MOTORCRAFT. The "Popular" part is MELLING 1050.

This group includes MELLING 1050, MELLING 959 and MELLING 1049 and the remaining parts above.

This table covers kits that group a timing chain with the related tensioners and guides. Read more

5 Timing Chain & Component Kit parts are listed for the 2022 Ford Police Suv, from S.A. GEAR and MELLING. S.A. GEAR 76426V carries the "Popular" badge.

Economy: 3 parts, from S.A. GEAR. A representative part number is S.A. GEAR 76426V.

The Standard Replacement section: 2 options from MELLING. MELLING 31049SP is listed in this group.

Part numbers include S.A. GEAR 76426V, S.A. GEAR 76426S and S.A. GEAR 76426, among others listed above.

This table covers the guides and dampers that keep the timing chain on its path. Read more

11 Timing Chain Guide / Damper parts for the 2022 Ford Police Suv come from 2 brands — MELLING and S.A. GEAR. The "Popular" part is MELLING BG7008.

This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

6 Timing Chain Tensioner parts are listed for the 2022 Ford Police Suv, from MELLING and S.A. GEAR.

Listed part numbers: MELLING BT7026, MELLING BT7025 and MELLING BT7011, plus the other parts above.

This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Timing Cover Gasket parts are listed for the 2022 Ford Police Suv, from ELRING and FEL-PRO. 1 part fits every engine; the other 1 is engine-specific.

Listed part numbers: ELRING 922340 and FEL-PRO TCS46225.

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Timing Cover Seal parts are listed for the 2022 Ford Police Suv, from MAHLE / CLEVITE and VICTOR REINZ.

Part numbers include MAHLE / CLEVITE 67616 and VICTOR REINZ 811049600.

This table covers the crankshaft sprockets that drive the timing chain or belt. Read more

3 Timing Crank Sprocket parts are listed for the 2022 Ford Police Suv, from INA, MELLING and S.A. GEAR.

Listed part numbers: INA ZS1086, MELLING S1282 and S.A. GEAR S1495.

This table covers the Timing Idler sprockets. Read more

This group shows a single part: MELLING S1326WC.

This table covers the turbochargers that compress intake air. Read more

3 Turbocharger parts are listed for the 2022 Ford Police Suv, from GPD and MOTORCRAFT.

Listed part numbers: GPD 2513013, GPD 2513014 and MOTORCRAFT TC72.

This table covers the Turbocharger Coolant lines. Typical signs include a wet fitting, a rusted pipe, or a pressure loss in this circuit. Flare or thread the new line the way the notes specify; a kinked replacement will fail early. Read more

5 Turbocharger Coolant Line parts are listed for the 2022 Ford Police Suv, from DORMAN and STANDARD MOTOR PRODUCTS. DORMAN 667913 carries the "Popular" badge.

Part numbers include DORMAN 667913, DORMAN 667911 and DORMAN 667915, among others listed above.

This table covers the gaskets that seal the Turbocharger. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: GPD 2535125.

This table covers the fasteners that mount the turbocharger. Read more

This group shows a single part: DORMAN 32100.

This table covers the Turbocharger Oil filters. Typical signs include restricted flow — long cranking, weak airflow, or dirty fluid after a short interval. Seat the new filter so it cannot bypass, and use the grade the notes call for. Read more

One part is listed for the 2022 Ford Police Suv — GATES TF1005.

This table covers the Turbocharger Oil lines. Typical signs include a wet fitting, a rusted pipe, or a pressure loss in this circuit. Flare or thread the new line the way the notes specify; a kinked replacement will fail early. Read more

One part is listed for the 2022 Ford Police Suv — MOTORCRAFT OSL13.

This table covers the Turbocharger Oil Line Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

One part is listed for the 2022 Ford Police Suv — MAHLE / CLEVITE B33892.

This table covers the Valve covers. Read more

2 Valve Cover parts for the 2022 Ford Police Suv come from 2 brands — AUTOTECNICA and SKP.

This group includes AUTOTECNICA FD1420028 and SKP SK2316675.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Valve Cover Gasket parts are listed for the 2022 Ford Police Suv, from FEL-PRO and MAHLE / CLEVITE.

Listed part numbers: FEL-PRO VS50910R, FEL-PRO VS50814R1 and MAHLE / CLEVITE VS50990.

This table covers the pressed-in bronze and cast-iron guides that align valve stems. Typical signs include oil smoke on startup, a guide that has gone oval, or a valve that no longer seats quietly. Guides are a machine-shop fit. Confirm stem diameter in the notes before ordering. Read more

2 Valve Guide parts are listed for the 2022 Ford Police Suv, from ENGINETECH and SBI.

Part numbers include ENGINETECH GD3170 and SBI 1403170.

This table covers the lifters / tappets that transfer cam motion to the valves. Read more

3 Valve Lifter parts are listed for the 2022 Ford Police Suv, from ENGINETECH, SBI and SEALED POWER.

Part numbers include ENGINETECH L5000, SBI VL575 and SEALED POWER HT2314.

This table covers the Valve Spring retainers. Read more

2 Valve Spring Retainer parts for the 2022 Ford Police Suv come from MELLING.

Listed part numbers: MELLING VSR714 and MELLING VSR724.

This table covers the keepers that lock each valve-spring retainer to the stem. Read more

6 Valve Spring Retainer Keeper parts for the 2022 Ford Police Suv come from 3 brands — ENGINETECH, MELLING and SBI.

This group includes ENGINETECH EPF1140, ENGINETECH EPF1104 and MELLING VL1140 and the remaining parts above.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Valve Stem Seal parts are listed for the 2022 Ford Police Suv, from SBI, ENGINETECH and MAHLE / CLEVITE.

Part numbers include ENGINETECH S350V, MAHLE / CLEVITE SS46052 and SBI 1221516, among others listed above.