2026 Ford Police Suv Engine Parts

This table covers the camshafts that open the valves. Read more

This group shows a single part: MELLING MC1408.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2026 Ford Police Suv — FEL-PRO TCS46239.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Crankshaft Seal parts are listed for the 2026 Ford Police Suv, from FEL-PRO and VICTOR REINZ.

Part numbers include FEL-PRO TCS46117, FEL-PRO BS40729 and VICTOR REINZ 181011601.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Cylinder Head Gasket parts for the 2026 Ford Police Suv come from FEL-PRO.

Part numbers include FEL-PRO 26941PT, FEL-PRO 26818PT and FEL-PRO 26817PT.

This table covers the Cylinder Head temperature sensors. Typical signs include hard cold starts, a fan that never comes on, or a gauge that disagrees with the scan tool. A sensor that reads open or shorted is usually the part; an implausible-but-smooth reading can be wiring. Read more

STANDARD MOTOR PRODUCTS supplies both parts for the 2026 Ford Police Suv.

Part numbers include STANDARD MOTOR PRODUCTS TX188 and STANDARD MOTOR PRODUCTS TS653.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

One part is listed for the 2026 Ford Police Suv — MELLING V3226.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

This group shows a single part: DAYCO PB1722N.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

MELLING supplies both parts for the 2026 Ford Police Suv.

This group includes MELLING V3428 and MELLING V3344.

This table covers the long-block engine assemblies (block, crank, heads). Read more

This group shows a single part: MOTORCRAFT VB5Z6006A.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

8 Oil parts are listed for the 2026 Ford Police Suv, from IDEMITSU and MOBIL. MOBIL 125195 carries the "Popular" badge. 3 parts fit every engine; the other 5 are engine-specific.

In the Full Synthetic grade, IDEMITSU and MOBIL supply 6 parts: full-synthetic oils. A representative part number is MOBIL 125195.

The High Mileage (>75,000 Miles) section lists 1 option from MOBIL — oils grouped for high-mileage engines. MOBIL 103767 is listed in this group.

In the Synthetic Blend grade, MOBIL supplies 1 part: synthetic-blend oils. A representative part number is MOBIL 124407.

Part numbers include MOBIL 125195, IDEMITSU 30015204750 and IDEMITSU 30015204953, among others listed above.

This table covers the heat exchangers that cool engine oil. Typical signs include oil at the cooler fittings, or coolant that looks like a milkshake. Pressure-test both circuits after a cooler swap — a leak here mixes oil and coolant. Read more

MOTORCRAFT supplies both parts for the 2026 Ford Police Suv.

Listed part numbers: MOTORCRAFT YOC9 and MOTORCRAFT YOC10.

This table covers the Oil Dipstick tubes. Read more

MOTORCRAFT supplies both parts for the 2026 Ford Police Suv.

Part numbers include MOTORCRAFT EDPS62 and MOTORCRAFT EDPS64.

This table covers the caps on the oil filler neck. Read more

MOTORAD supplies both parts for the 2026 Ford Police Suv.

Part numbers include MOTORAD MO201 and MOTORAD MO202.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

24 Oil Filter parts are listed for the 2026 Ford Police Suv, from VARIOUS MFR, WIX, ACDELCO and 10 other brands. PRO-TEC PXL10050 carries the "Popular" badge.

In the Economy grade, PRO-TEC, FVP, VARIOUS MFR and 3 other brands supply 9 parts: the catalog's value-priced group. A representative part number is PRO-TEC PXL10050.

In the High Performance / Heavy Duty grade, MOBIL and WIX supply 3 parts: grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. A representative part number is WIX 57502XP.

The Standard Replacement section lists 12 options from ACDELCO, WIX, HASTINGS / BALDWIN and 4 other brands — built to original-equipment specification. ACDELCO PF63 is listed in this group.

This table covers the Oil Filter Adapter Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

This group shows a single part: VICTOR REINZ 712474300.

This table covers the Oil Filter covers. Read more

This group shows a single part: DORMAN 921157.

This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

One part is listed for the 2026 Ford Police Suv — MELLING M490.

This table covers the pickup tubes and screens that feed the oil pump. Read more

This group shows a single part: MOTORCRAFT EPT3.

This table covers the rings that seal each piston to the cylinder wall. Read more

This group shows a single part: HASTINGS MANUFACTURING 2N6043.

This table covers the rocker arms that transfer cam motion to the valves. Read more

One part is listed for the 2026 Ford Police Suv — INA VF02551.

This table covers the Short blocks. Read more

This group shows a single part: MOTORCRAFT VB5Z6009A.

This table covers the Timing belts. Typical signs include squeal on cold start, cracked ribs, or glazing. Spin the tensioner and idlers by hand while the belt is off. Read more

This group shows a single part: MOTORCRAFT TCRK13.

This table covers the timing chains that keep the cams in time with the crank. Read more

4 Timing Chain parts for the 2026 Ford Police Suv come from 2 brands — MELLING and MOTORCRAFT.

Part numbers include MELLING 959, MELLING 1050 and MELLING 1049, among others listed above.

This table covers kits that group a timing chain with the related tensioners and guides. Read more

MELLING supplies both parts for the 2026 Ford Police Suv.

This group includes MELLING 31049SP and MELLING 31049SPVVT.

This table covers the guides and dampers that keep the timing chain on its path. Read more

7 Timing Chain Guide / Damper parts for the 2026 Ford Police Suv come from MELLING. The "Popular" part is MELLING BT7009.

This group includes MELLING BT7009, MELLING BG7026 and MELLING BT7024 and the remaining parts above.

This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

MELLING supplies the 4 Timing Chain Tensioner parts for the 2026 Ford Police Suv.

Part numbers include MELLING BT7026, MELLING BT7025 and MELLING BT7011, among others listed above.

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2026 Ford Police Suv — VICTOR REINZ 811049600.

This table covers the crankshaft sprockets that drive the timing chain or belt. Read more

2 Timing Crank Sprocket parts are listed for the 2026 Ford Police Suv, from INA and MELLING.

This group includes INA ZS1086 and MELLING S1282.

This table covers the Timing Idler sprockets. Read more

This group shows a single part: MELLING S1326WC.

This table covers the turbochargers that compress intake air. Read more

MOTORCRAFT supplies both parts for the 2026 Ford Police Suv.

This group includes MOTORCRAFT TC26 and MOTORCRAFT TC27.

This table covers the Valve Spring retainers. Read more

2 Valve Spring Retainer parts for the 2026 Ford Police Suv come from MELLING.

Part numbers include MELLING VSR714 and MELLING VSR724.

This table covers the keepers that lock each valve-spring retainer to the stem. Read more

2 Valve Spring Retainer Keeper parts for the 2026 Ford Police Suv come from MELLING.

Listed part numbers: MELLING VL1140 and MELLING VL1125.

This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

5 Variable Valve Timing (VVT) Solenoid / Actuator parts are listed for the 2026 Ford Police Suv, from STANDARD MOTOR PRODUCTS and MELLING.

Part numbers include MELLING VCTS1006, MELLING VCTS1007 and STANDARD MOTOR PRODUCTS VVT346, among others listed above.

This table covers the cam phaser sprockets used by the variable-valve-timing system. Read more

MELLING supplies both parts for the 2026 Ford Police Suv.

Part numbers include MELLING VCTA1005E and MELLING VCTA1005I.

This table covers the Variable Valve Timing (VVT) Sprocket bolts. Read more

2 Variable Valve Timing (VVT) Sprocket Bolt parts for the 2026 Ford Police Suv come from MELLING.

Part numbers include MELLING VCTB1005 and MELLING VCTB1006.