2025 Ford Police Suv Engine Parts

This table covers the camshafts that open the valves. Read more

One part is listed for the 2025 Ford Police Suv — MELLING MC1408.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: FEL-PRO TCS46239.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Crankshaft Seal parts for the 2025 Ford Police Suv come from 2 brands — FEL-PRO and VICTOR REINZ. 1 part fits every engine; the other 2 are engine-specific.

This group includes FEL-PRO TCS46117, FEL-PRO BS40729 and VICTOR REINZ 181011601.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Cylinder Head Gasket parts are listed for the 2025 Ford Police Suv, from FEL-PRO and MAHLE / CLEVITE.

Part numbers include FEL-PRO 26941PT, FEL-PRO 26818PT and FEL-PRO 26817PT, among others listed above.

This table covers the Cylinder Head temperature sensors. Typical signs include hard cold starts, a fan that never comes on, or a gauge that disagrees with the scan tool. A sensor that reads open or shorted is usually the part; an implausible-but-smooth reading can be wiring. Read more

2 Cylinder Head Temperature Sensor parts for the 2025 Ford Police Suv come from STANDARD MOTOR PRODUCTS.

Part numbers include STANDARD MOTOR PRODUCTS TX188 and STANDARD MOTOR PRODUCTS TS653.

This table covers the Engine covers. Read more

One part is listed for the 2025 Ford Police Suv — VARIOUS MFR FO1228180.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

2 Exhaust Valve parts for the 2025 Ford Police Suv come from 2 brands — MELLING and SBI.

This group includes MELLING V3226 and SBI 13226.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

One part is listed for the 2025 Ford Police Suv — DAYCO PB1722N.

This table covers the Intake manifolds. Typical signs include an exhaust tick, a vacuum leak, or a gasket that has burned through. Replace the gaskets and hardware; a warped flange will leak with a new gasket alone. Read more

This group shows a single part: SKP SK2300889.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

4 Intake Valve parts for the 2025 Ford Police Suv come from 2 brands — MELLING and SBI.

Listed part numbers: MELLING V3428, MELLING V3344 and SBI 13510, plus the other parts above.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

7 Motor Mount parts for the 2025 Ford Police Suv come from 2 brands — ANCHOR and DEA / MARMON RIDE CONTROL.

Part numbers include ANCHOR 3699, ANCHOR 3709 and ANCHOR 3728, among others listed above.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

15 Oil parts for the 2025 Ford Police Suv come from 4 brands — MOBIL, IDEMITSU, PENTOSIN and 1 other brand. The "Popular" part is MOBIL 125195. 11 parts fit every engine; the other 4 are engine-specific.

The Full Synthetic section lists 11 options from MOBIL, IDEMITSU, PENTOSIN and 1 other brand — full-synthetic oils. MOBIL 125195 is listed in this group.

In the High Mileage (>75,000 Miles) grade, MOBIL supplies 3 parts: oils grouped for high-mileage engines. A representative part number is MOBIL 125201.

The Synthetic Blend section lists 1 option from MOBIL — synthetic-blend oils. MOBIL 124407 is listed in this group.

This table covers the heat exchangers that cool engine oil. Typical signs include oil at the cooler fittings, or coolant that looks like a milkshake. Pressure-test both circuits after a cooler swap — a leak here mixes oil and coolant. Read more

2 Oil Cooler parts for the 2025 Ford Police Suv come from MOTORCRAFT.

Listed part numbers: MOTORCRAFT YOC9 and MOTORCRAFT YOC10.

This table covers the Oil Dipstick tubes. Read more

2 Oil Dipstick / Tube parts for the 2025 Ford Police Suv come from MOTORCRAFT.

Listed part numbers: MOTORCRAFT EDPS62 and MOTORCRAFT EDPS64.

This table covers the drain plugs in the oil pan. Read more

5 Oil Drain Plug parts for the 2025 Ford Police Suv come from DORMAN.

Listed part numbers: DORMAN 097826, DORMAN 097826HPCD and DORMAN 097826HP, plus the other parts above.

This table covers the caps on the oil filler neck. Read more

5 Oil Filler Cap parts for the 2025 Ford Police Suv come from 3 brands — MOTORAD, MOTORCRAFT and GATES.

This group includes GATES 31295, MOTORAD MO201 and MOTORAD MO202 and the remaining parts above.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

27 Oil Filter parts for the 2025 Ford Police Suv come from 15 brands — VARIOUS MFR, WIX, ACDELCO and 12 other brands. The "Popular" part is PRO-TEC PXL10050. Grades run from Economy through Standard Replacement; Standard Replacement is the most populated section, led by ACDELCO, MOTORCRAFT, WIX and 6 other brands.

This table covers the Oil Filter Adapter Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

One part is listed for the 2025 Ford Police Suv — VICTOR REINZ 712474300.

This table covers the Oil Filter covers. Read more

2 Oil Filter Cover parts are listed for the 2025 Ford Police Suv, from DORMAN and MOTORAD.

This group includes DORMAN 921157 and MOTORAD MO363.

This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

This group shows a single part: MELLING M490.

This table covers the pickup tubes and screens that feed the oil pump. Read more

One part is listed for the 2025 Ford Police Suv — MOTORCRAFT EPT3.

This table covers the rocker arms that transfer cam motion to the valves. Read more

This group shows a single part: INA VF02551.

This table covers the Timing belts. Typical signs include squeal on cold start, cracked ribs, or glazing. Spin the tensioner and idlers by hand while the belt is off. Read more

One part is listed for the 2025 Ford Police Suv — MOTORCRAFT TCRK13.

This table covers the timing chains that keep the cams in time with the crank. Read more

4 Timing Chain parts are listed for the 2025 Ford Police Suv, from MELLING and MOTORCRAFT.

Listed part numbers: MELLING 959, MELLING 1050 and MELLING 1049, plus the other parts above.

This table covers kits that group a timing chain with the related tensioners and guides. Read more

2 Timing Chain & Component Kit parts for the 2025 Ford Police Suv come from MELLING.

This group includes MELLING 31049SP and MELLING 31049SPVVT.

This table covers the guides and dampers that keep the timing chain on its path. Read more

MELLING supplies the 7 Timing Chain Guide / Damper parts for the 2025 Ford Police Suv. MELLING BT7009 carries the "Popular" badge.

This group includes MELLING BT7009, MELLING BG7026 and MELLING BT7024 and the remaining parts above.

This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

4 Timing Chain Tensioner parts for the 2025 Ford Police Suv come from MELLING.

This group includes MELLING BT7026, MELLING BT7025 and MELLING BT7011 and the remaining parts above.

This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: FEL-PRO TCS46225.

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: VICTOR REINZ 811049600.

This table covers the crankshaft sprockets that drive the timing chain or belt. Read more

2 Timing Crank Sprocket parts for the 2025 Ford Police Suv come from 2 brands — INA and MELLING.

This group includes INA ZS1086 and MELLING S1282.

This table covers the Timing Idler sprockets. Read more

One part is listed for the 2025 Ford Police Suv — MELLING S1326WC.

This table covers the turbochargers that compress intake air. Read more

2 Turbocharger parts for the 2025 Ford Police Suv come from MOTORCRAFT.

This group includes MOTORCRAFT TC26 and MOTORCRAFT TC27.

This table covers the Turbocharger Coolant lines. Typical signs include a wet fitting, a rusted pipe, or a pressure loss in this circuit. Flare or thread the new line the way the notes specify; a kinked replacement will fail early. Read more

3 Turbocharger Coolant Line parts for the 2025 Ford Police Suv come from DORMAN.

Listed part numbers: DORMAN 667911, DORMAN 667915 and DORMAN 667913.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Valve Cover Gasket parts for the 2025 Ford Police Suv come from FEL-PRO.

Listed part numbers: FEL-PRO VS50910R and FEL-PRO VS50814R1.

This table covers the pressed-in bronze and cast-iron guides that align valve stems. Typical signs include oil smoke on startup, a guide that has gone oval, or a valve that no longer seats quietly. Guides are a machine-shop fit. Confirm stem diameter in the notes before ordering. Read more

This group shows a single part: SBI 1403170.

This table covers the lifters / tappets that transfer cam motion to the valves. Read more

3 Valve Lifter parts for the 2025 Ford Police Suv come from 3 brands — ENGINETECH, SBI and SEALED POWER.

Listed part numbers: ENGINETECH L5000, SBI VL575 and SEALED POWER HT2314.

This table covers the Valve Spring retainers. Read more

MELLING supplies both parts for the 2025 Ford Police Suv.

Part numbers include MELLING VSR714 and MELLING VSR724.

This table covers the keepers that lock each valve-spring retainer to the stem. Read more

4 Valve Spring Retainer Keeper parts are listed for the 2025 Ford Police Suv, from MELLING and SBI.

This group includes MELLING VL1140, MELLING VL1125 and SBI 1211140 and the remaining parts above.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Valve Stem Seal parts for the 2025 Ford Police Suv come from SBI.

Part numbers include SBI 1221516 and SBI 1221427.

This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

11 Variable Valve Timing (VVT) Solenoid / Actuator parts for the 2025 Ford Police Suv come from 3 brands — STANDARD MOTOR PRODUCTS, MELLING and GATES. The "Popular" part is MELLING VCTS1006.

The Economy section lists 2 options from GATES — the catalog's value-priced group. GATES VVS182 is listed in this group.

In the Standard Replacement grade, MELLING and STANDARD MOTOR PRODUCTS supply 4 parts: built to original-equipment specification. A representative part number is MELLING VCTS1006.

5 further parts sit outside the graded sections, with the same engine-level match.

This table covers the cam phaser sprockets used by the variable-valve-timing system. Read more

5 Variable Valve Timing (VVT) Sprocket parts for the 2025 Ford Police Suv come from 3 brands — GATES, MELLING and STANDARD MOTOR PRODUCTS.

This group includes GATES VCP840, GATES VCP839 and MELLING VCTA1005E and the remaining parts above.

This table covers the Variable Valve Timing (VVT) Sprocket bolts. Read more

MELLING supplies both parts for the 2025 Ford Police Suv.

Part numbers include MELLING VCTB1005 and MELLING VCTB1006.