2023 Ford Expedition Engine Parts

This table covers the Camshaft Alignment tools. This is a service tool, not a wear part — match the application in the notes. Read more

One part is listed for the 2023 Ford Expedition — LISLE 37200.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

MAHLE / CLEVITE supplies both parts for the 2023 Ford Expedition.

This group includes MAHLE / CLEVITE GS33868 and MAHLE / CLEVITE GS34060.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

This group shows a single part: SEALED POWER 65080A.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Crankshaft Seal parts are listed for the 2023 Ford Expedition, from MAHLE / CLEVITE, FEL-PRO and VICTOR REINZ. FEL-PRO TCS46117 carries the "Popular" badge.

Listed part numbers: FEL-PRO TCS46117, MAHLE / CLEVITE 67616 and MAHLE / CLEVITE 67827, plus the other parts above.

This table covers the Cylinder Head Alignment Dowel pins. Read more

This group shows a single part: MAHLE / CLEVITE GS34087.

This table covers the bolts that clamp the cylinder head to the block. Read more

This group shows a single part: MAHLE / CLEVITE GS33947.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Cylinder Head Gasket parts for the 2023 Ford Expedition come from 2 brands — FEL-PRO and MAHLE / CLEVITE.

Part numbers include FEL-PRO 26849PT, FEL-PRO 26853PT and MAHLE / CLEVITE 55389, among others listed above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

This group shows a single part: MOTORCRAFT EVG5.

This table covers the Cylinder Head Spacer shims. Read more

2 Cylinder Head Spacer Shim parts for the 2023 Ford Expedition come from SBI.

Part numbers include SBI 2302207L and SBI 2302207R.

This table covers the Cylinder Head temperature sensors. Typical signs include hard cold starts, a fan that never comes on, or a gauge that disagrees with the scan tool. A sensor that reads open or shorted is usually the part; an implausible-but-smooth reading can be wiring. Read more

2 Cylinder Head Temperature Sensor parts are listed for the 2023 Ford Expedition, from STANDARD MOTOR PRODUCTS and WELLS.

Listed part numbers: STANDARD MOTOR PRODUCTS TX365 and WELLS 5S17577.

This table covers the Engine covers. Read more

3 Engine Cover parts for the 2023 Ford Expedition come from 2 brands — TECHPRO and VARIOUS MFR.

Part numbers include TECHPRO FO1228199 and TECHPRO FO1228200, among others listed above.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

2 Exhaust Valve parts are listed for the 2023 Ford Expedition, from MELLING and SBI.

Part numbers include MELLING V5818 and SBI 13496.

This table covers the Harmonic Balancer bolts. Read more

One part is listed for the 2023 Ford Expedition — DORMAN 595001.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Intake Manifold Gasket parts for the 2023 Ford Expedition come from 3 brands — MAHLE / CLEVITE, FEL-PRO and VICTOR REINZ.

This group includes FEL-PRO MS97634, MAHLE / CLEVITE MS20414 and MAHLE / CLEVITE MS20400 and the remaining parts above.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

2 Intake Valve parts are listed for the 2023 Ford Expedition, from MELLING and SBI.

Listed part numbers: MELLING V5817 and SBI 13495.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

4 Motor Mount parts are listed for the 2023 Ford Expedition, from ANCHOR and WESTAR.

Listed part numbers: ANCHOR 3371, ANCHOR 3636 and WESTAR EM4143, plus the other parts above.

This table covers the Motor Mount kits. Read more

ANCHOR supplies both parts for the 2023 Ford Expedition.

Listed part numbers: ANCHOR 301004 and ANCHOR 301005.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

31 Oil parts are listed for the 2023 Ford Expedition, from VALVOLINE, MOBIL, LIQUI MOLY and 4 other brands. MOBIL 125195 carries the "Popular" badge. Grades run from Full Synthetic through Synthetic Blend; Full Synthetic is the most populated section, led by VALVOLINE, MOBIL, LIQUI MOLY and 4 other brands.

This table covers the heat exchangers that cool engine oil. Typical signs include oil at the cooler fittings, or coolant that looks like a milkshake. Pressure-test both circuits after a cooler swap — a leak here mixes oil and coolant. Read more

3 Oil Cooler parts are listed for the 2023 Ford Expedition, from DORMAN, GPD and MOTORCRAFT.

Listed part numbers: DORMAN 918994, GPD 2611476 and MOTORCRAFT YOC15.

This table covers the seals at the Oil Cooler. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: MAHLE / CLEVITE B33281.

This table covers the Oil Dipstick tubes. Read more

One part is listed for the 2023 Ford Expedition — MOTORCRAFT EDPS76.

This table covers the drain plugs in the oil pan. Read more

DORMAN supplies both parts for the 2023 Ford Expedition.

Listed part numbers: DORMAN 090034 and DORMAN 090175.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Oil Drain Plug Gasket parts for the 2023 Ford Expedition come from 2 brands — MAHLE / CLEVITE and VICTOR REINZ.

This group includes MAHLE / CLEVITE B33828 and VICTOR REINZ 712492000.

This table covers the caps on the oil filler neck. Read more

2 Oil Filler Cap parts are listed for the 2023 Ford Expedition, from MOTORAD and MOTORCRAFT.

Listed part numbers: MOTORAD MO201 and MOTORCRAFT EC791.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

16 Oil Filter parts are listed for the 2023 Ford Expedition, from ACDELCO, VARIOUS MFR, WIX and 9 other brands. WIX 57502XP carries the "Popular" badge.

In the Economy grade, CHAMP / LUBER-FINER, FRAM, FVP and 2 other brands supply 5 parts: the catalog's value-priced group. A representative part number is CHAMP / LUBER-FINER PH500.

In the High Performance / Heavy Duty grade, WIX, ACDELCO and MOBIL supply 3 parts: grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. A representative part number is WIX 57502XP.

The Standard Replacement section lists 8 options from ACDELCO, MOTORCRAFT, WIX and 4 other brands — built to original-equipment specification. ACDELCO PF63 is listed in this group.

This table covers the oil pans that hold the engine's oil sump. Read more

3 Oil Pan parts for the 2023 Ford Expedition come from 3 brands — DORMAN, SKP and SPECTRA PREMIUM.

This group includes DORMAN 264323, SKP SKFP71A and SPECTRA PREMIUM FP71A.

This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

2 Oil Pump parts are listed for the 2023 Ford Expedition, from SKP and MELLING.

Economy: 1 part, from SKP. A representative part number is SKP SKM490.

The Standard Replacement section: 1 option from MELLING. MELLING M490 is listed in this group.

Part numbers include SKP SKM490 and MELLING M490.

This table covers the rings that seal each piston to the cylinder wall. Read more

3 Piston Ring parts for the 2023 Ford Expedition come from 2 brands — HASTINGS MANUFACTURING and ENGINETECH.

In the Premium grade, ENGINETECH supplies 1 part: a step above OE specification in materials, tolerances or warranty terms. A representative part number is ENGINETECH S36406.

Standard Replacement: 2 parts, from HASTINGS MANUFACTURING. A representative part number is HASTINGS MANUFACTURING 2N5321.

Part numbers include ENGINETECH S36406, HASTINGS MANUFACTURING 2N5321 and HASTINGS MANUFACTURING 2N5321S.

This table covers the timing chains that keep the cams in time with the crank. Read more

4 Timing Chain parts for the 2023 Ford Expedition come from 4 brands — MELLING, MOTORCRAFT, PREFERRED COMPONENTS INC and 1 other brand.

Listed part numbers: MELLING 1079, MOTORCRAFT TCRK12 and PREFERRED COMPONENTS INC C1079, plus the other parts above.

This table covers kits that group a timing chain with the related tensioners and guides. Read more

S.A. GEAR supplies both parts for the 2023 Ford Expedition.

Part numbers include S.A. GEAR 76471 and S.A. GEAR 76471V.

This table covers the guides and dampers that keep the timing chain on its path. Read more

8 Timing Chain Guide / Damper parts for the 2023 Ford Expedition come from 3 brands — S.A. GEAR, MELLING and PREFERRED COMPONENTS INC. The "Popular" part is S.A. GEAR 71220.

Listed part numbers: S.A. GEAR 71220, S.A. GEAR 71221 and MELLING BG7042, plus the other parts above.

This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

S.A. GEAR supplies both parts for the 2023 Ford Expedition.

Part numbers include S.A. GEAR 91440 and S.A. GEAR 91439.

This table covers the crankshaft sprockets that drive the timing chain or belt. Read more

4 Timing Crank Sprocket parts are listed for the 2023 Ford Expedition, from INA, MELLING, PREFERRED COMPONENTS INC and 1 other brand.

This group includes INA ZS1086, MELLING S1316 and PREFERRED COMPONENTS INC G51316 and the remaining parts above.

This table covers the turbochargers that compress intake air. Read more

4 Turbocharger parts are listed for the 2023 Ford Expedition, from MOTORCRAFT and ROTOMASTER.

Listed part numbers: MOTORCRAFT TC69, MOTORCRAFT TC62 and ROTOMASTER K1030165N, plus the other parts above.

This table covers the Turbocharger Boost sensors. Typical signs include a warning lamp, a stored code, or a reading that drops out when the harness is wiggled. Inspect the connector and ground before replacing the sensor — wiring faults are often condemned as bad sensors. Read more

This group shows a single part: WELLS 5S15115.

This table covers the Turbocharger Coolant lines. Typical signs include a wet fitting, a rusted pipe, or a pressure loss in this circuit. Flare or thread the new line the way the notes specify; a kinked replacement will fail early. Read more

One part is listed for the 2023 Ford Expedition — STANDARD MOTOR PRODUCTS TIH192.

This table covers the Turbocharger Oil lines. Typical signs include a wet fitting, a rusted pipe, or a pressure loss in this circuit. Flare or thread the new line the way the notes specify; a kinked replacement will fail early. Read more

2 Turbocharger Oil Line parts are listed for the 2023 Ford Expedition, from MOTORCRAFT and ROTOMASTER.

This group includes MOTORCRAFT OSL9 and ROTOMASTER K1035202N.

This table covers the Turbocharger Oil Line Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

One part is listed for the 2023 Ford Expedition — MAHLE / CLEVITE B33884.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2023 Ford Expedition — FEL-PRO VS50993R.

This table covers the pressed-in bronze and cast-iron guides that align valve stems. Typical signs include oil smoke on startup, a guide that has gone oval, or a valve that no longer seats quietly. Guides are a machine-shop fit. Confirm stem diameter in the notes before ordering. Read more

2 Valve Guide parts are listed for the 2023 Ford Expedition, from ENGINETECH and SBI.

Listed part numbers: ENGINETECH GD3170 and SBI 1403166.

This table covers the lifters / tappets that transfer cam motion to the valves. Read more

3 Valve Lifter parts are listed for the 2023 Ford Expedition, from ENGINETECH, SBI and SEALED POWER.

Listed part numbers: ENGINETECH L5000, SBI VL575 and SEALED POWER HT2314.

This table covers the springs that close each intake and exhaust valve. Typical signs include a sagging corner, a broken coil, or a clunk from the spring pocket. Replace springs in axle pairs and inspect the seats. Read more

2 Valve Spring parts for the 2023 Ford Expedition come from 2 brands — MELLING and SBI.

This group includes MELLING VS2492 and SBI 1601712.

This table covers the Valve Spring retainers. Read more

This group shows a single part: MELLING VSR715.

This table covers the keepers that lock each valve-spring retainer to the stem. Read more

3 Valve Spring Retainer Keeper parts for the 2023 Ford Expedition come from 3 brands — ENGINETECH, MELLING and SBI.

Listed part numbers: ENGINETECH EPF1082, MELLING VL1120 and SBI 1211082.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Valve Stem Seal parts are listed for the 2023 Ford Expedition, from MAHLE / CLEVITE and SBI.

This group includes MAHLE / CLEVITE SS46135 and SBI 1221518.

This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

6 Variable Valve Timing (VVT) Solenoid / Actuator parts are listed for the 2023 Ford Expedition, from DORMAN, GATES, WELLS and 3 other brands. DORMAN 916612 carries the "Popular" badge.

Economy: 3 parts, from DORMAN, GATES and WELLS. A representative part number is DORMAN 916612.

The Standard Replacement section: 3 options from S.A. GEAR, CLOYES and STANDARD MOTOR PRODUCTS. S.A. GEAR S1504S is listed in this group.

This group includes DORMAN 916612, GATES VVS403 and WELLS 2T1313 and the remaining parts above.

This table covers the seals at the Variable Valve Timing (VVT) Solenoid Gasket. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: DORMAN 263155.

This table covers the cam phaser sprockets used by the variable-valve-timing system. Read more

6 Variable Valve Timing (VVT) Sprocket parts are listed for the 2023 Ford Expedition, from DORMAN, S.A. GEAR, STANDARD MOTOR PRODUCTS and 1 other brand. DORMAN 916777 carries the "Popular" badge.

Economy: 2 parts, from DORMAN. A representative part number is DORMAN 916777.

The Standard Replacement section: 4 options from S.A. GEAR, STANDARD MOTOR PRODUCTS and ENGINETECH. STANDARD MOTOR PRODUCTS VVT800 is listed in this group.

This group includes DORMAN 916777, DORMAN 916776 and STANDARD MOTOR PRODUCTS VVT800 and the remaining parts above.

This table covers the Variable Valve Timing (VVT) Sprocket bolts. Read more

2 Variable Valve Timing (VVT) Sprocket Bolt parts for the 2023 Ford Expedition come from CLOYES.

This group includes CLOYES VCB106 and CLOYES VCB109.