2025 Ford Expedition Engine Parts

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Crankshaft Seal parts are listed for the 2025 Ford Expedition, from FEL-PRO and VICTOR REINZ.

Listed part numbers: FEL-PRO TCS46117 and VICTOR REINZ 181011601.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Cylinder Head Gasket parts for the 2025 Ford Expedition come from FEL-PRO.

This group includes FEL-PRO 26849PT and FEL-PRO 26853PT.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

This group shows a single part: MOTORCRAFT EVG5.

This table covers the Cylinder Head Spacer shims. Read more

2 Cylinder Head Spacer Shim parts for the 2025 Ford Expedition come from SBI.

Listed part numbers: SBI 2302207L and SBI 2302207R.

This table covers the Cylinder Head temperature sensors. Typical signs include hard cold starts, a fan that never comes on, or a gauge that disagrees with the scan tool. A sensor that reads open or shorted is usually the part; an implausible-but-smooth reading can be wiring. Read more

2 Cylinder Head Temperature Sensor parts are listed for the 2025 Ford Expedition, from STANDARD MOTOR PRODUCTS and WELLS.

This group includes STANDARD MOTOR PRODUCTS TX365 and WELLS 5S17577.

This table covers the Engine covers. Read more

This group shows a single part: VARIOUS MFR FO1228210.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

2 Exhaust Valve parts are listed for the 2025 Ford Expedition, from MELLING and SBI.

This group includes MELLING V5818 and SBI 13496.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

2 Intake Valve parts are listed for the 2025 Ford Expedition, from MELLING and SBI.

Part numbers include MELLING V5817 and SBI 13495.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

ANCHOR supplies both parts for the 2025 Ford Expedition.

Part numbers include ANCHOR 3371 and ANCHOR 3636.

This table covers the Motor Mount kits. Read more

ANCHOR supplies both parts for the 2025 Ford Expedition.

This group includes ANCHOR 301004 and ANCHOR 301005.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

27 Oil parts are listed for the 2025 Ford Expedition, from VALVOLINE, MOBIL, LIQUI MOLY and 2 other brands. LIQUI MOLY 20228 carries the "Popular" badge. They are grouped as Full Synthetic, High Mileage (>75,000 Miles) and Synthetic Blend, with Full Synthetic the largest group at 17 parts from VALVOLINE, LIQUI MOLY, MOBIL and 2 other brands.

This table covers the heat exchangers that cool engine oil. Typical signs include oil at the cooler fittings, or coolant that looks like a milkshake. Pressure-test both circuits after a cooler swap — a leak here mixes oil and coolant. Read more

3 Oil Cooler parts are listed for the 2025 Ford Expedition, from DORMAN, GPD and MOTORCRAFT.

Part numbers include DORMAN 918994, GPD 2611476 and MOTORCRAFT YOC15.

This table covers the Oil Dipstick tubes. Read more

One part is listed for the 2025 Ford Expedition — MOTORCRAFT EDPS76.

This table covers the drain plugs in the oil pan. Read more

DORMAN supplies both parts for the 2025 Ford Expedition.

This group includes DORMAN 090034 and DORMAN 090175.

This table covers the caps on the oil filler neck. Read more

2 Oil Filler Cap parts are listed for the 2025 Ford Expedition, from MOTORAD and MOTORCRAFT.

This group includes MOTORAD MO201 and MOTORCRAFT EC791.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

15 Oil Filter parts are listed for the 2025 Ford Expedition, from VARIOUS MFR, WIX, ACDELCO and 9 other brands. ACDELCO PF63 carries the "Popular" badge.

In the Economy grade, FAMOUS BRAND, FRAM, FVP and 2 other brands supply 5 parts: the catalog's value-priced group. A representative part number is FAMOUS BRAND R84502.

In the High Performance / Heavy Duty grade, MOBIL and WIX supply 2 parts: grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. A representative part number is MOBIL M1212A.

The Standard Replacement section lists 8 options from ACDELCO, MOTORCRAFT, WIX and 4 other brands — built to original-equipment specification. ACDELCO PF63 is listed in this group.

This table covers the oil pans that hold the engine's oil sump. Read more

2 Oil Pan parts for the 2025 Ford Expedition come from 2 brands — SKP and SPECTRA PREMIUM.

Part numbers include SKP SKFP71A and SPECTRA PREMIUM FP71A.

This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

One part is listed for the 2025 Ford Expedition — MELLING M490.

This table covers the timing chains that keep the cams in time with the crank. Read more

2 Timing Chain parts for the 2025 Ford Expedition come from 2 brands — MELLING and MOTORCRAFT.

Listed part numbers: MELLING 1079 and MOTORCRAFT TCRK12.

This table covers the guides and dampers that keep the timing chain on its path. Read more

3 Timing Chain Guide / Damper parts for the 2025 Ford Expedition come from 2 brands — MELLING and INA.

This group includes INA ZG0066, MELLING BG7042 and MELLING BG7041.

This table covers the crankshaft sprockets that drive the timing chain or belt. Read more

One part is listed for the 2025 Ford Expedition — MELLING S1316.

This table covers the turbochargers that compress intake air. Read more

One part is listed for the 2025 Ford Expedition — MOTORCRAFT TC76.

This table covers the Turbocharger Oil lines. Typical signs include a wet fitting, a rusted pipe, or a pressure loss in this circuit. Flare or thread the new line the way the notes specify; a kinked replacement will fail early. Read more

3 Turbocharger Oil Line parts are listed for the 2025 Ford Expedition, from MOTORCRAFT and ROTOMASTER.

Listed part numbers: MOTORCRAFT OSL9, MOTORCRAFT OSL11 and ROTOMASTER K1035202N.

This table covers the pressed-in bronze and cast-iron guides that align valve stems. Typical signs include oil smoke on startup, a guide that has gone oval, or a valve that no longer seats quietly. Guides are a machine-shop fit. Confirm stem diameter in the notes before ordering. Read more

One part is listed for the 2025 Ford Expedition — SBI 1403166.

This table covers the lifters / tappets that transfer cam motion to the valves. Read more

3 Valve Lifter parts are listed for the 2025 Ford Expedition, from ENGINETECH, SBI and SEALED POWER.

Listed part numbers: ENGINETECH L5000, SBI VL575 and SEALED POWER HT2314.

This table covers the springs that close each intake and exhaust valve. Typical signs include a sagging corner, a broken coil, or a clunk from the spring pocket. Replace springs in axle pairs and inspect the seats. Read more

2 Valve Spring parts for the 2025 Ford Expedition come from 2 brands — MELLING and SBI.

Listed part numbers: MELLING VS2492 and SBI 1601712.

This table covers the Valve Spring retainers. Read more

This group shows a single part: MELLING VSR715.

This table covers the keepers that lock each valve-spring retainer to the stem. Read more

2 Valve Spring Retainer Keeper parts for the 2025 Ford Expedition come from 2 brands — MELLING and SBI.

This group includes MELLING VL1120 and SBI 1211082.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2025 Ford Expedition — SBI 1221518.

This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

3 Variable Valve Timing (VVT) Solenoid / Actuator parts are listed for the 2025 Ford Expedition, from GATES, WELLS and STANDARD MOTOR PRODUCTS.

Economy: 2 parts, from GATES and WELLS. A representative part number is GATES VVS403.

The Standard Replacement section: 1 option from STANDARD MOTOR PRODUCTS. STANDARD MOTOR PRODUCTS VVT391 is listed in this group.

Listed part numbers: GATES VVS403, WELLS 2T1313 and STANDARD MOTOR PRODUCTS VVT391.

This table covers the cam phaser sprockets used by the variable-valve-timing system. Read more

5 Variable Valve Timing (VVT) Sprocket parts are listed for the 2025 Ford Expedition, from DORMAN, CLOYES and STANDARD MOTOR PRODUCTS. STANDARD MOTOR PRODUCTS VVT800 carries the "Popular" badge.

Economy: 2 parts, from DORMAN. A representative part number is DORMAN 916776.

The Standard Replacement section: 3 options from CLOYES and STANDARD MOTOR PRODUCTS. STANDARD MOTOR PRODUCTS VVT800 is listed in this group.

This group includes STANDARD MOTOR PRODUCTS VVT800, DORMAN 916776 and DORMAN 916777 and the remaining parts above.

This table covers the Variable Valve Timing (VVT) Sprocket bolts. Read more

2 Variable Valve Timing (VVT) Sprocket Bolt parts for the 2025 Ford Expedition come from CLOYES.

Part numbers include CLOYES VCB106 and CLOYES VCB109.