2024 Ford Expedition Engine Parts

This table covers the Camshaft Alignment tools. This is a service tool, not a wear part — match the application in the notes. Read more

This group shows a single part: LISLE 37200.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: MAHLE / CLEVITE GS34060.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

One part is listed for the 2024 Ford Expedition — SEALED POWER 65080A.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Crankshaft Seal parts for the 2024 Ford Expedition come from 2 brands — FEL-PRO and VICTOR REINZ.

Part numbers include FEL-PRO TCS46117 and VICTOR REINZ 181011601.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

FEL-PRO supplies both parts for the 2024 Ford Expedition.

Listed part numbers: FEL-PRO 26849PT and FEL-PRO 26853PT.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

One part is listed for the 2024 Ford Expedition — MOTORCRAFT EVG5.

This table covers the Cylinder Head Spacer shims. Read more

SBI supplies both parts for the 2024 Ford Expedition.

Listed part numbers: SBI 2302207L and SBI 2302207R.

This table covers the Cylinder Head temperature sensors. Typical signs include hard cold starts, a fan that never comes on, or a gauge that disagrees with the scan tool. A sensor that reads open or shorted is usually the part; an implausible-but-smooth reading can be wiring. Read more

2 Cylinder Head Temperature Sensor parts for the 2024 Ford Expedition come from 2 brands — STANDARD MOTOR PRODUCTS and WELLS.

This group includes STANDARD MOTOR PRODUCTS TX365 and WELLS 5S17577.

This table covers the Engine covers. Read more

3 Engine Cover parts are listed for the 2024 Ford Expedition, from TECHPRO and VARIOUS MFR.

Listed part numbers: TECHPRO FO1228199 and TECHPRO FO1228200, plus the other parts above.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

2 Exhaust Valve parts for the 2024 Ford Expedition come from 2 brands — MELLING and SBI.

Part numbers include MELLING V5818 and SBI 13496.

This table covers the Harmonic Balancer bolts. Read more

This group shows a single part: DORMAN 595001.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2024 Ford Expedition — FEL-PRO MS97634.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

2 Intake Valve parts for the 2024 Ford Expedition come from 2 brands — MELLING and SBI.

Listed part numbers: MELLING V5817 and SBI 13495.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

4 Motor Mount parts for the 2024 Ford Expedition come from 2 brands — ANCHOR and WESTAR.

This group includes ANCHOR 3371, ANCHOR 3636 and WESTAR EM4143 and the remaining parts above.

This table covers the Motor Mount kits. Read more

2 Motor Mount Kit parts for the 2024 Ford Expedition come from ANCHOR.

Listed part numbers: ANCHOR 301004 and ANCHOR 301005.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

31 Oil parts for the 2024 Ford Expedition come from 7 brands — VALVOLINE, MOBIL, LIQUI MOLY and 4 other brands. The "Popular" part is MOBIL 125195. Full Synthetic, High Mileage (>75,000 Miles) and Synthetic Blend are all represented, and Full Synthetic alone accounts for 19 parts.

This table covers the heat exchangers that cool engine oil. Typical signs include oil at the cooler fittings, or coolant that looks like a milkshake. Pressure-test both circuits after a cooler swap — a leak here mixes oil and coolant. Read more

3 Oil Cooler parts for the 2024 Ford Expedition come from 3 brands — DORMAN, GPD and MOTORCRAFT.

Part numbers include DORMAN 918994, GPD 2611476 and MOTORCRAFT YOC15.

This table covers the Oil Dipstick tubes. Read more

This group shows a single part: MOTORCRAFT EDPS76.

This table covers the drain plugs in the oil pan. Read more

2 Oil Drain Plug parts for the 2024 Ford Expedition come from DORMAN.

Part numbers include DORMAN 090034 and DORMAN 090175.

This table covers the caps on the oil filler neck. Read more

2 Oil Filler Cap parts for the 2024 Ford Expedition come from 2 brands — MOTORAD and MOTORCRAFT.

Listed part numbers: MOTORAD MO201 and MOTORCRAFT EC791.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

14 Oil Filter parts for the 2024 Ford Expedition come from 11 brands — VARIOUS MFR, WIX, ACDELCO and 8 other brands. The "Popular" part is ACDELCO PF63.

The Economy section lists 4 options from FRAM, FVP, PRO-TEC and 1 other brand — the catalog's value-priced group. FRAM FE10575 is listed in this group.

The High Performance / Heavy Duty section lists 2 options from MOBIL and WIX — grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. MOBIL M1212A is listed in this group.

In the Standard Replacement grade, ACDELCO, MOTORCRAFT, WIX and 4 other brands supply 8 parts: built to original-equipment specification. A representative part number is ACDELCO PF63.

This table covers the oil pans that hold the engine's oil sump. Read more

3 Oil Pan parts are listed for the 2024 Ford Expedition, from DORMAN, SKP and SPECTRA PREMIUM.

Listed part numbers: DORMAN 264323, SKP SKFP71A and SPECTRA PREMIUM FP71A.

This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

3 Oil Pump parts for the 2024 Ford Expedition come from 3 brands — SKP, ENGINETECH and MELLING.

The Economy section: 1 option from SKP. SKP SKM490 is listed in this group.

Standard Replacement: 2 parts, from ENGINETECH and MELLING. A representative part number is ENGINETECH EP352.

This group includes SKP SKM490, ENGINETECH EP352 and MELLING M490.

This table covers the rings that seal each piston to the cylinder wall. Read more

3 Piston Ring parts are listed for the 2024 Ford Expedition, from HASTINGS MANUFACTURING and ENGINETECH.

The Premium section lists 1 option from ENGINETECH — a step above OE specification in materials, tolerances or warranty terms. ENGINETECH S36406 is listed in this group.

The Standard Replacement section: 2 options from HASTINGS MANUFACTURING. HASTINGS MANUFACTURING 2N5321 is listed in this group.

Listed part numbers: ENGINETECH S36406, HASTINGS MANUFACTURING 2N5321 and HASTINGS MANUFACTURING 2N5321S.

This table covers the timing chains that keep the cams in time with the crank. Read more

4 Timing Chain parts are listed for the 2024 Ford Expedition, from MELLING, MOTORCRAFT, PREFERRED COMPONENTS INC and 1 other brand.

Part numbers include MELLING 1079, MOTORCRAFT TCRK12 and PREFERRED COMPONENTS INC C1079, among others listed above.

This table covers kits that group a timing chain with the related tensioners and guides. Read more

2 Timing Chain & Component Kit parts for the 2024 Ford Expedition come from S.A. GEAR.

This group includes S.A. GEAR 76471 and S.A. GEAR 76471V.

This table covers the guides and dampers that keep the timing chain on its path. Read more

8 Timing Chain Guide / Damper parts are listed for the 2024 Ford Expedition, from S.A. GEAR, MELLING and PREFERRED COMPONENTS INC. S.A. GEAR 71220 carries the "Popular" badge.

Listed part numbers: S.A. GEAR 71220, S.A. GEAR 71221 and MELLING BG7042, plus the other parts above.

This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

2 Timing Chain Tensioner parts for the 2024 Ford Expedition come from S.A. GEAR.

Part numbers include S.A. GEAR 91440 and S.A. GEAR 91439.

This table covers the crankshaft sprockets that drive the timing chain or belt. Read more

4 Timing Crank Sprocket parts for the 2024 Ford Expedition come from 4 brands — INA, MELLING, PREFERRED COMPONENTS INC and 1 other brand.

This group includes INA ZS1086, MELLING S1316 and PREFERRED COMPONENTS INC G51316 and the remaining parts above.

This table covers the turbochargers that compress intake air. Read more

4 Turbocharger parts for the 2024 Ford Expedition come from 2 brands — MOTORCRAFT and ROTOMASTER.

Listed part numbers: MOTORCRAFT TC69, MOTORCRAFT TC62 and ROTOMASTER K1030165N, plus the other parts above.

This table covers the Turbocharger Boost sensors. Typical signs include a warning lamp, a stored code, or a reading that drops out when the harness is wiggled. Inspect the connector and ground before replacing the sensor — wiring faults are often condemned as bad sensors. Read more

One part is listed for the 2024 Ford Expedition — WELLS 5S15115.

This table covers the Turbocharger Oil lines. Typical signs include a wet fitting, a rusted pipe, or a pressure loss in this circuit. Flare or thread the new line the way the notes specify; a kinked replacement will fail early. Read more

2 Turbocharger Oil Line parts for the 2024 Ford Expedition come from 2 brands — MOTORCRAFT and ROTOMASTER.

Listed part numbers: MOTORCRAFT OSL9 and ROTOMASTER K1035202N.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: FEL-PRO VS50993R.

This table covers the pressed-in bronze and cast-iron guides that align valve stems. Typical signs include oil smoke on startup, a guide that has gone oval, or a valve that no longer seats quietly. Guides are a machine-shop fit. Confirm stem diameter in the notes before ordering. Read more

This group shows a single part: SBI 1403166.

This table covers the lifters / tappets that transfer cam motion to the valves. Read more

3 Valve Lifter parts for the 2024 Ford Expedition come from 3 brands — ENGINETECH, SBI and SEALED POWER.

Listed part numbers: ENGINETECH L5000, SBI VL575 and SEALED POWER HT2314.

This table covers the springs that close each intake and exhaust valve. Typical signs include a sagging corner, a broken coil, or a clunk from the spring pocket. Replace springs in axle pairs and inspect the seats. Read more

2 Valve Spring parts are listed for the 2024 Ford Expedition, from MELLING and SBI.

Part numbers include MELLING VS2492 and SBI 1601712.

This table covers the Valve Spring retainers. Read more

One part is listed for the 2024 Ford Expedition — MELLING VSR715.

This table covers the keepers that lock each valve-spring retainer to the stem. Read more

2 Valve Spring Retainer Keeper parts are listed for the 2024 Ford Expedition, from MELLING and SBI.

Part numbers include MELLING VL1120 and SBI 1211082.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: SBI 1221518.

This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

5 Variable Valve Timing (VVT) Solenoid / Actuator parts for the 2024 Ford Expedition come from 5 brands — GATES, WELLS, S.A. GEAR and 2 other brands. The "Popular" part is S.A. GEAR S1504S.

The Economy section: 2 options from GATES and WELLS. GATES VVS403 is listed in this group.

Standard Replacement: 3 parts, from S.A. GEAR, CLOYES and STANDARD MOTOR PRODUCTS. A representative part number is S.A. GEAR S1504S.

Part numbers include S.A. GEAR S1504S, GATES VVS403 and WELLS 2T1313, among others listed above.

This table covers the cam phaser sprockets used by the variable-valve-timing system. Read more

5 Variable Valve Timing (VVT) Sprocket parts for the 2024 Ford Expedition come from 3 brands — DORMAN, S.A. GEAR and STANDARD MOTOR PRODUCTS. The "Popular" part is STANDARD MOTOR PRODUCTS VVT800.

The Economy section: 2 options from DORMAN. DORMAN 916776 is listed in this group.

Standard Replacement: 3 parts, from S.A. GEAR and STANDARD MOTOR PRODUCTS. A representative part number is STANDARD MOTOR PRODUCTS VVT800.

Part numbers include STANDARD MOTOR PRODUCTS VVT800, DORMAN 916776 and DORMAN 916777, among others listed above.

This table covers the Variable Valve Timing (VVT) Sprocket bolts. Read more

CLOYES supplies both parts for the 2024 Ford Expedition.

This group includes CLOYES VCB106 and CLOYES VCB109.