2021 GMC Canyon Drivetrain Parts

This table covers the actuators that engage four-wheel drive at the transfer case or axle. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

2 4WD Actuator parts for the 2021 GMC Canyon come from 2 brands — GM GENUINE and WELLS.

This group includes GM GENUINE 84630666 and WELLS 1S15510.

This table covers the 4WD Actuator Clutch sleeves. Read more

One part is listed for the 2021 GMC Canyon — GM GENUINE 23471875.

This table covers the forks a 4WD actuator moves. Read more

This group shows a single part: GM GENUINE 23471871.

This table covers the 4WD Actuator housings. Read more

One part is listed for the 2021 GMC Canyon — GM GENUINE 84242534.

This table covers the disconnects that freewheel a front axle in two-wheel drive. Read more

One part is listed for the 2021 GMC Canyon — GM GENUINE 84522876.

This table covers the Axle bumpers. Read more

One part is listed for the 2021 GMC Canyon — GM GENUINE 23203561.

This table covers the Axle housings. Read more

One part is listed for the 2021 GMC Canyon — ACDELCO 84379386.

This table covers the Axle shafts. Read more

3 Axle Shaft parts for the 2021 GMC Canyon come from GM GENUINE.

Part numbers include GM GENUINE 85579602, GM GENUINE 23490377 and GM GENUINE 23490378.

This table covers the Axle Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

3 Axle Shaft Bearing parts for the 2021 GMC Canyon come from 3 brands — ACDELCO, DANA and GM GENUINE.

Part numbers include ACDELCO 23490337, DANA 5660662 and GM GENUINE 84572373.

This table covers the Axle Shaft Housing tubes. Read more

This group shows a single part: GM GENUINE 84926902.

This table covers the Axle Shaft Lock / Snap rings. Read more

2 Axle Shaft Lock / Snap Ring parts for the 2021 GMC Canyon come from GM GENUINE.

Listed part numbers: GM GENUINE 23471872 and GM GENUINE 23474671.

This table covers the Axle Shaft retainers and clips. Read more

One part is listed for the 2021 GMC Canyon — DANA 44281.

This table covers the seals where an axle shaft exits the housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Axle Shaft Seal parts are listed for the 2021 GMC Canyon, from TIMKEN and GM GENUINE.

Part numbers include GM GENUINE 291345, TIMKEN SL260314 and TIMKEN SL260498.

This table covers the complete CV axle shafts from differential (or hub) to wheel. Typical signs include a click in tight turns, grease flung around the wheel well, or a vibration that builds with speed. A torn boot caught early is a boot kit; caught late it is the whole axle. Torque the axle nut to the method in the notes. Read more

6 CV Axle parts are listed for the 2021 GMC Canyon, from GSP, TOP NOTCH, APWI and 2 other brands. APWI GM8503 carries the "Popular" badge.

The Specialty - For Lifted Vehicles section lists 2 options from GSP and TOP NOTCH — grouped under the catalog's "Specialty - For Lifted Vehicles" designation — the notes column spells out what sets them apart. GSP NCV10183XDP is listed in this group.

The Standard Replacement section lists 4 options from APWI, TRAKMOTIVE, GM GENUINE and 1 other brand — built to original-equipment specification. APWI GM8503 is listed in this group.

This group includes APWI GM8503, GSP NCV10183XDP and TOP NOTCH TN20196XDP and the remaining parts above.

This table covers the boots that keep grease in a CV joint. Typical signs include a split boot, grease flung around the joint, or a click once grit is inside. A boot caught early is a kit. Once the joint has clicked, the joint itself is usually worn. Read more

One part is listed for the 2021 GMC Canyon — GM GENUINE 84849629.

This table covers the bands that clamp a CV boot to the joint. Read more

5 CV Joint Boot Band parts for the 2021 GMC Canyon come from GM GENUINE.

Part numbers include GM GENUINE 23474665, GM GENUINE 23474666 and GM GENUINE 23474667, among others listed above.

This table covers the CV Joint Lock rings. Read more

This group shows a single part: GM GENUINE 23490371.

This table covers the carriers that hold the differential gears in the axle. Read more

GM GENUINE supplies the 4 Differential Carrier parts for the 2021 GMC Canyon.

Listed part numbers: GM GENUINE 84640877, GM GENUINE 85549947 and GM GENUINE 22954507, plus the other parts above.

This table covers the bearings and races that support the differential carrier. Read more

4 Differential Carrier Bearing / Race parts are listed for the 2021 GMC Canyon, from DANA and GM GENUINE.

Part numbers include DANA 10001186, DANA 10043917 and GM GENUINE S1409, among others listed above.

This table covers the Differential Carrier bolts. Read more

This group shows a single part: GM GENUINE 11589358.

This table covers the Differential Carrier bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

One part is listed for the 2021 GMC Canyon — GM GENUINE 84370076.

This table covers the Differential Carrier shims. Read more

6 Differential Carrier Shim parts for the 2021 GMC Canyon come from GM GENUINE. The "Popular" part is GM GENUINE 23471910.

This group includes GM GENUINE 23471910, GM GENUINE 23471911 and GM GENUINE 23471912 and the remaining parts above.

This table covers the Differential covers. Read more

2 Differential Cover parts for the 2021 GMC Canyon come from GM GENUINE.

Part numbers include GM GENUINE 23471892 and GM GENUINE 23490349.

This table covers the Differential Cover bolts. Read more

One part is listed for the 2021 GMC Canyon — GM GENUINE 11603161.

This table covers the gaskets that seal the Differential Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

GM GENUINE supplies both parts for the 2021 GMC Canyon.

Part numbers include GM GENUINE 23490353 and GM GENUINE 23471893.

This table covers the Differential Cross pins. Read more

2 Differential Cross Pin parts for the 2021 GMC Canyon come from GM GENUINE.

This group includes GM GENUINE 23471870 and GM GENUINE 23490375.

This table covers the Differential Crush sleeves. Read more

This group shows a single part: USA STANDARD GEAR USA11138.

This table covers the Differential Fill drain plugs. Read more

One part is listed for the 2021 GMC Canyon — GM GENUINE 23471884.

This table covers the bearings and races on the differential pinion. Read more

5 Differential Pinion Bearing / Race parts for the 2021 GMC Canyon come from 2 brands — GM GENUINE and DANA. The "Popular" part is GM GENUINE S1411.

Part numbers include GM GENUINE S1411, DANA 10001045 and DANA 10001187, among others listed above.

This table covers the baffles that control oil at the pinion bearings. Read more

2 Differential Pinion Bearing Baffle parts for the 2021 GMC Canyon come from GM GENUINE.

Listed part numbers: GM GENUINE 23490398 and GM GENUINE 23471955.

This table covers the Differential Pinion nuts. Read more

One part is listed for the 2021 GMC Canyon — GM GENUINE 23493140.

This table covers the seals at the differential pinion yoke. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Differential Pinion Seal parts are listed for the 2021 GMC Canyon, from GM GENUINE and TIMKEN.

Part numbers include GM GENUINE 84053573, GM GENUINE 87861098 and TIMKEN SL260575, among others listed above.

This table covers the Differential Pinion Shaft Lock bolts. Read more

This group shows a single part: GM GENUINE 23493144.

This table covers the Differential Pinion shims. Read more

GM GENUINE supplies the 6 Differential Pinion Shim parts for the 2021 GMC Canyon. GM GENUINE 23471902 carries the "Popular" badge.

Listed part numbers: GM GENUINE 23471902, GM GENUINE 23471901 and GM GENUINE 23471903, plus the other parts above.

This table covers kits that group the bearings, races and seals for a differential rebuild. Read more

5 Differential Rebuild Kit parts for the 2021 GMC Canyon come from BCA. The "Popular" part is BCA NBDRK367.

The Master Kit section lists 2 options from BCA — grouped under the catalog's "Master Kit" designation — the notes column spells out what sets them apart. BCA NBDRK369MK is listed in this group.

In the Standard Kit grade, BCA supplies 3 parts: grouped under the catalog's "Standard Kit" designation — the notes column spells out what sets them apart. A representative part number is BCA NBDRK367.

This group includes BCA NBDRK367, BCA NBDRK369MK and BCA NBDRK367MK and the remaining parts above.

This table covers the ring-and-pinion gear sets that set the axle ratio. Read more

7 Differential Ring and Pinion parts are listed for the 2021 GMC Canyon, from DANA and GM GENUINE. DANA 10004299 carries the "Popular" badge.

Part numbers include DANA 10004299, DANA 10005797 and DANA 2017552, among others listed above.

This table covers the Differential Ring Gear bolts. Read more

One part is listed for the 2021 GMC Canyon — GM GENUINE 11549347.

This table covers the Differential Spider gears. Read more

5 Differential Spider Gear parts are listed for the 2021 GMC Canyon, from GM GENUINE, DANA and AAM. GM GENUINE 23471868 carries the "Popular" badge.

Part numbers include GM GENUINE 23471868, AAM 74043199 and DANA 10001183, among others listed above.

This table covers the Differential washers. Read more

GM GENUINE supplies both parts for the 2021 GMC Canyon.

Listed part numbers: GM GENUINE 23483008 and GM GENUINE 23490400.

This table covers the driveshafts that carry torque from the transmission or transfer case. Read more

8 Drive Shaft parts for the 2021 GMC Canyon come from 3 brands — DORMAN, WJB / INMOTION PARTS and GM GENUINE. The "Popular" part is DORMAN 986434.

Part numbers include DORMAN 986434, DORMAN 938385 and DORMAN 986279, among others listed above.

This table covers the Drive Shaft bolts. Read more

GM GENUINE supplies both parts for the 2021 GMC Canyon.

Listed part numbers: GM GENUINE 11548472 and GM GENUINE 11588811.

This table covers the gaskets that seal the Drive Shaft CV Joint. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: GM GENUINE 23471896.

This table covers the Drive Shaft End yokes. Read more

One part is listed for the 2021 GMC Canyon — GM GENUINE 84473886.

This table covers the Drive Shaft retainers. Read more

2 Drive Shaft Retainer parts for the 2021 GMC Canyon come from GM GENUINE.

Part numbers include GM GENUINE 23107857 and GM GENUINE 11603594.

This table covers the gear oils specified for the axle or transfer case. Typical signs include a low-oil lamp, knocking, or oil that has gone thin before the next interval. Match the viscosity and spec in the notes, not just the weight on the bottle. Read more

5 Gear Oil parts are listed for the 2021 GMC Canyon, from VALVOLINE and ACDELCO. VALVOLINE VV975 carries the "Popular" badge.

This group includes VALVOLINE VV975, ACDELCO 104108 and VALVOLINE 889785 and the remaining parts above.

This table covers the Transfer Case adapters. Read more

This group shows a single part: GM GENUINE 84263509.

This table covers the Transfer Case bolts. Read more

2 Transfer Case Bolt parts for the 2021 GMC Canyon come from GM GENUINE.

This group includes GM GENUINE 11515758 and GM GENUINE 19169068.

This table covers the Transfer Case Clutch Pressure plates. Typical signs include warpage, cracks, or a plate that no longer locates the assembly. Confirm which plate the notes describe — backing plates, clutch plates and strike plates are different parts. Read more

GM GENUINE supplies both parts for the 2021 GMC Canyon.

This group includes GM GENUINE 19133077 and GM GENUINE 84184296.

This table covers the Transfer Case Clutch Pressure Plate Return springs. Typical signs include a sagging corner, a broken coil, or a clunk from the spring pocket. Replace springs in axle pairs and inspect the seats. Read more

This group shows a single part: GM GENUINE 19133074.

This table covers the Transfer Case control modules. Read more

This group shows a single part: GM GENUINE 87835510.

This table covers the chains that drive the transfer case. Read more

This group shows a single part: GM GENUINE 23488113.

This table covers the Transfer Case Driven Sprocket Retaining rings. Read more

One part is listed for the 2021 GMC Canyon — GM GENUINE 19133113.

This table covers the fluids specified for the transfer case. Typical signs include discolored fluid, a burnt smell, or a level that keeps dropping. Use only the specification in the notes — the tables group grades because they are not interchangeable. Read more

14 Transfer Case Fluid parts are listed for the 2021 GMC Canyon, from VALVOLINE, PENTOSIN, ACDELCO and 2 other brands. ACDELCO 109394 carries the "Popular" badge.

The ATF 64 section lists 2 options from PENTOSIN — grouped under the catalog's "ATF 64" designation — the notes column spells out what sets them apart. PENTOSIN 1058113 is listed in this group.

In the Dexron grade, ACDELCO, VALVOLINE and MOBIL supply 5 parts: grouped under the catalog's "Dexron" designation — the notes column spells out what sets them apart. A representative part number is ACDELCO 109394.

In the Multi-Vehicle grade, VALVOLINE, LUCAS OIL and MOBIL supply 6 parts: grouped under the catalog's "Multi-Vehicle" designation — the notes column spells out what sets them apart. A representative part number is VALVOLINE VV3246.

1 ungrouped part is not assigned to a grade, with the same engine-level match.

This table covers the gaskets that seal the Transfer Case. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Transfer Case Gasket parts for the 2021 GMC Canyon come from 2 brands — DORMAN and GM GENUINE.

This group includes DORMAN 926492, DORMAN 926499 and GM GENUINE 23367389 and the remaining parts above.

This table covers the Transfer Case High / Low clutches. Typical signs include slip at highway speed, chatter on takeoff, or a pedal that stays low. Resurface or replace the flywheel with the clutch — a heat-checked flywheel wastes the new disc. Read more

One part is listed for the 2021 GMC Canyon — GM GENUINE 19299093.

This table covers the Transfer Case housings. Read more

3 Transfer Case Housing parts for the 2021 GMC Canyon come from GM GENUINE.

Part numbers include GM GENUINE 19133109, GM GENUINE 84402109 and GM GENUINE 84636465.

This table covers the Transfer Case Housing plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

This group shows a single part: GM GENUINE 19133165.

This table covers the Transfer Case Input shafts. Read more

One part is listed for the 2021 GMC Canyon — GM GENUINE 23488111.

This table covers the Transfer Case Input Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

One part is listed for the 2021 GMC Canyon — GM GENUINE 19133006.

This table covers the Transfer Case Input Shaft Pilot bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

One part is listed for the 2021 GMC Canyon — GM GENUINE 19132983.

This table covers the seals at the Transfer Case Input Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Transfer Case Input Shaft Seal parts for the 2021 GMC Canyon come from 2 brands — ELRING and GM GENUINE.

This group includes ELRING B16870 and GM GENUINE 19299084.

This table covers the Transfer Case motors. Typical signs include no motion, a squeal, or a motor that only runs on one speed. Confirm power, ground and the control module before replacing the motor. Read more

7 Transfer Case Motor parts for the 2021 GMC Canyon come from 5 brands — STANDARD MOTOR PRODUCTS, WAI GLOBAL, DORMAN and 2 other brands. The "Popular" part is DORMAN 600899.

Listed part numbers: DORMAN 600899, GM GENUINE 84718571 and SKP SK600899A, plus the other parts above.

This table covers the Transfer Case Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

One part is listed for the 2021 GMC Canyon — GM GENUINE 84888175.

This table covers the Transfer Case Output shafts. Read more

2 Transfer Case Output Shaft parts for the 2021 GMC Canyon come from GM GENUINE.

This group includes GM GENUINE 19133059 and GM GENUINE 84518611.

This table covers the Transfer Case Output Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

4 Transfer Case Output Shaft Bearing parts for the 2021 GMC Canyon come from GM GENUINE.

This group includes GM GENUINE 19133127, GM GENUINE 23488106 and GM GENUINE 19133136 and the remaining parts above.

This table covers the Transfer Case Output Shaft bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

This group shows a single part: GM GENUINE 19207729.

This table covers the seals at the Transfer Case Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Transfer Case Output Shaft Seal parts are listed for the 2021 GMC Canyon, from GM GENUINE and SKF.

Part numbers include GM GENUINE 24233898, GM GENUINE 84368195 and SKF 18860.

This table covers the planetary carriers in the transfer case. Read more

One part is listed for the 2021 GMC Canyon — GM GENUINE 19299090.

This table covers the Transfer Case Range position sensors. Typical signs include a stall, a no-start, or a code for cam or crank correlation. Check the connector and the reluctor gap before replacing the sensor. Read more

2 Transfer Case Range Position Sensor parts are listed for the 2021 GMC Canyon, from GM GENUINE and WELLS.

Listed part numbers: GM GENUINE 84377721 and WELLS 5S12117.