2025 GMC Canyon Drivetrain Parts

This table covers the actuators that engage four-wheel drive at the transfer case or axle. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

This group shows a single part: GM GENUINE 85739453.

This table covers the 4WD Actuator Clutch shafts. Read more

One part is listed for the 2025 GMC Canyon — GM GENUINE 84937881.

This table covers the 4WD Actuator Clutch sleeves. Read more

One part is listed for the 2025 GMC Canyon — GM GENUINE 84937882.

This table covers the forks a 4WD actuator moves. Read more

This group shows a single part: GM GENUINE 84937885.

This table covers the 4WD Actuator housings. Read more

One part is listed for the 2025 GMC Canyon — GM GENUINE 84242534.

This table covers the disconnects that freewheel a front axle in two-wheel drive. Read more

One part is listed for the 2025 GMC Canyon — GM GENUINE 84937886.

This table covers the Axle / Differential assemblies. Read more

2 Axle / Differential Assembly parts for the 2025 GMC Canyon come from GM GENUINE. Every part fits both the 2.7L L4 Turbocharged and the 5.3L V8.

Part numbers include GM GENUINE 86297222 and GM GENUINE 86813869.

This table covers the Axle bumpers. Read more

One part is listed for the 2025 GMC Canyon — GM GENUINE 23203561.

This table covers the seals at the Axle Intermediate Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: GM GENUINE 84983738.

This table covers the Axle shafts. Read more

5 Axle Shaft parts for the 2025 GMC Canyon come from GM GENUINE. Every part fits both the 2.7L L4 Turbocharged and the 5.3L V8.

Listed part numbers: GM GENUINE 84937149, GM GENUINE 84937150 and GM GENUINE 84937151, plus the other parts above.

This table covers the Axle Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

2 Axle Shaft Bearing parts for the 2025 GMC Canyon come from GM GENUINE. Every part fits both the 2.7L L4 Turbocharged and the 5.3L V8.

Part numbers include GM GENUINE 26053326 and GM GENUINE RW2010.

This table covers the Axle Shaft Housing tubes. Read more

This group shows a single part: GM GENUINE 84937883.

This table covers the Axle Shaft Lock / Snap rings. Read more

2 Axle Shaft Lock / Snap Ring parts for the 2025 GMC Canyon come from GM GENUINE. Every part fits both the 2.7L L4 Turbocharged and the 5.3L V8.

Listed part numbers: GM GENUINE 23474671 and GM GENUINE 84428317.

This table covers the Axle Shaft Pilot bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

This group shows a single part: GM GENUINE FD102.

This table covers the Axle Shaft retainers and clips. Read more

One part is listed for the 2025 GMC Canyon — GM GENUINE 14012746.

This table covers the seals where an axle shaft exits the housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2025 GMC Canyon — GM GENUINE 291360.

This table covers the complete CV axle shafts from differential (or hub) to wheel. Typical signs include a click in tight turns, grease flung around the wheel well, or a vibration that builds with speed. A torn boot caught early is a boot kit; caught late it is the whole axle. Torque the axle nut to the method in the notes. Read more

GM GENUINE supplies both parts for the 2025 GMC Canyon. All of them fit every engine offered in the 2025 Canyon.

Listed part numbers: GM GENUINE 84521701 and GM GENUINE 84521702.

This table covers the boots that keep grease in a CV joint. Typical signs include a split boot, grease flung around the joint, or a click once grit is inside. A boot caught early is a kit. Once the joint has clicked, the joint itself is usually worn. Read more

GM GENUINE supplies the 4 CV Joint Boot parts for the 2025 GMC Canyon. 3 parts fit every engine; the other 1 is engine-specific.

Part numbers include GM GENUINE 84576036, GM GENUINE 84803128 and GM GENUINE 84803133, among others listed above.

This table covers the bands that clamp a CV boot to the joint. Read more

5 CV Joint Boot Band parts for the 2025 GMC Canyon come from GM GENUINE. Every part fits both the 2.7L L4 Turbocharged and the 5.3L V8.

Part numbers include GM GENUINE 23474667, GM GENUINE 84803131 and GM GENUINE 84803132, among others listed above.

This table covers the bearings and races that support the differential carrier. Read more

GM GENUINE supplies both parts for the 2025 GMC Canyon. All of them fit every engine offered in the 2025 Canyon.

This group includes GM GENUINE 85722139 and GM GENUINE 84937119.

This table covers the Differential Carrier bolts. Read more

2 Differential Carrier Bolt parts for the 2025 GMC Canyon come from GM GENUINE. Every part fits both the 2.7L L4 Turbocharged and the 5.3L V8.

This group includes GM GENUINE 11561300 and GM GENUINE 11602523.

This table covers the Differential Carrier bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

GM GENUINE supplies both parts for the 2025 GMC Canyon. All of them fit every engine offered in the 2025 Canyon.

Part numbers include GM GENUINE 84937876 and GM GENUINE 84983736.

This table covers the Differential Carrier shims. Read more

5 Differential Carrier Shim parts for the 2025 GMC Canyon come from GM GENUINE. The "Popular" part is GM GENUINE 12471330. Every part fits both the 2.7L L4 Turbocharged and the 5.3L V8.

Listed part numbers: GM GENUINE 12471330, GM GENUINE 12471368 and GM GENUINE 12471362, plus the other parts above.

This table covers the Differential covers. Read more

2 Differential Cover parts for the 2025 GMC Canyon come from GM GENUINE. Every part fits both the 2.7L L4 Turbocharged and the 5.3L V8.

This group includes GM GENUINE 84937108 and GM GENUINE 84937890.

This table covers the Differential Cover bolts. Read more

One part is listed for the 2025 GMC Canyon — GM GENUINE 12471307.

This table covers the gaskets that seal the Differential Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

GM GENUINE supplies both parts for the 2025 GMC Canyon. All of them fit every engine offered in the 2025 Canyon.

Part numbers include GM GENUINE 84937889 and GM GENUINE 85721785.

This table covers the Differential Cross pins. Read more

2 Differential Cross Pin parts for the 2025 GMC Canyon come from GM GENUINE. Every part fits both the 2.7L L4 Turbocharged and the 5.3L V8.

Part numbers include GM GENUINE 84937116 and GM GENUINE 84937901.

This table covers the Differential Fill drain plugs. Read more

One part is listed for the 2025 GMC Canyon — GM GENUINE 55573646.

This table covers the Differential Lock actuators. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

One part is listed for the 2025 GMC Canyon — GM GENUINE 85721784.

This table covers the Differential Lock plates. Typical signs include warpage, cracks, or a plate that no longer locates the assembly. Confirm which plate the notes describe — backing plates, clutch plates and strike plates are different parts. Read more

2 Differential Lock Plate parts for the 2025 GMC Canyon come from GM GENUINE. Every part fits both the 2.7L L4 Turbocharged and the 5.3L V8.

Listed part numbers: GM GENUINE 84937139 and GM GENUINE 84983737.

This table covers the bearings and races on the differential pinion. Read more

4 Differential Pinion Bearing / Race parts for the 2025 GMC Canyon come from GM GENUINE. Every part fits both the 2.7L L4 Turbocharged and the 5.3L V8.

This group includes GM GENUINE 85722137, GM GENUINE 84937117 and GM GENUINE 84937118 and the remaining parts above.

This table covers the baffles that control oil at the pinion bearings. Read more

2 Differential Pinion Bearing Baffle parts for the 2025 GMC Canyon come from GM GENUINE. Every part fits both the 2.7L L4 Turbocharged and the 5.3L V8.

Listed part numbers: GM GENUINE 12479162 and GM GENUINE 84937912.

This table covers the Differential Pinion nuts. Read more

GM GENUINE supplies both parts for the 2025 GMC Canyon. All of them fit every engine offered in the 2025 Canyon.

This group includes GM GENUINE 09783762 and GM GENUINE 11603375.

This table covers the seals at the differential pinion yoke. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2025 GMC Canyon — GM GENUINE 84428304.

This table covers the Differential Pinion Shaft Lock bolts. Read more

This group shows a single part: GM GENUINE 25872305.

This table covers the Differential Pinion shims. Read more

GM GENUINE supplies the 5 Differential Pinion Shim parts for the 2025 GMC Canyon. All of them fit every engine offered in the 2025 Canyon.

This group includes GM GENUINE 52030095, GM GENUINE 52030111 and GM GENUINE 52030129 and the remaining parts above.

This table covers the ring-and-pinion gear sets that set the axle ratio. Read more

One part is listed for the 2025 GMC Canyon — GM GENUINE 85081823.

This table covers the Differential Ring Gear bolts. Read more

One part is listed for the 2025 GMC Canyon — GM GENUINE 11610549.

This table covers the Differential Side Bearing spacers. Read more

This group shows a single part: GM GENUINE 84428331.

This table covers the Differential Spider gears. Read more

One part is listed for the 2025 GMC Canyon — GM GENUINE 84937896.

This table covers the Differential washers. Read more

One part is listed for the 2025 GMC Canyon — GM GENUINE 26063838.

This table covers the driveshafts that carry torque from the transmission or transfer case. Read more

2 Drive Shaft parts for the 2025 GMC Canyon come from GM GENUINE. Every part fits both the 2.7L L4 Turbocharged and the 5.3L V8.

This group includes GM GENUINE 84521716 and GM GENUINE 85827798.

This table covers the Drive Shaft bolts. Read more

One part is listed for the 2025 GMC Canyon — GM GENUINE 11602575.

This table covers the gaskets that seal the Drive Shaft CV Joint. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: GM GENUINE 84937887.

This table covers the Drive Shaft End yokes. Read more

GM GENUINE supplies both parts for the 2025 GMC Canyon. All of them fit every engine offered in the 2025 Canyon.

Part numbers include GM GENUINE 84937124 and GM GENUINE 84937892.

This table covers the Drive Shaft retainers. Read more

This group shows a single part: GM GENUINE 84807281.

This table covers the Drive Shaft Slip yokes. Read more

2 Drive Shaft Slip Yoke parts for the 2025 GMC Canyon come from GM GENUINE. 1 part fits every engine; the other 1 is engine-specific.

This group includes GM GENUINE 84389645 and GM GENUINE 23256322.

This table covers the gear oils specified for the axle or transfer case. Typical signs include a low-oil lamp, knocking, or oil that has gone thin before the next interval. Match the viscosity and spec in the notes, not just the weight on the bottle. Read more

One part is listed for the 2025 GMC Canyon — ACDELCO 104122.

This table covers the Transfer Case assemblies. Read more

GM GENUINE supplies both parts for the 2025 GMC Canyon. All of them fit every engine offered in the 2025 Canyon.

Listed part numbers: GM GENUINE 84962849 and GM GENUINE 84988881.

This table covers the Transfer Case bolts. Read more

This group shows a single part: GM GENUINE 19169068.

This table covers the Transfer Case Clutch Pressure plates. Typical signs include warpage, cracks, or a plate that no longer locates the assembly. Confirm which plate the notes describe — backing plates, clutch plates and strike plates are different parts. Read more

GM GENUINE supplies both parts for the 2025 GMC Canyon. All of them fit every engine offered in the 2025 Canyon.

Listed part numbers: GM GENUINE 84962839 and GM GENUINE 84962851.

This table covers the chains that drive the transfer case. Read more

This group shows a single part: GM GENUINE 84962846.

This table covers the Transfer Case Driven Sprocket Retaining rings. Read more

One part is listed for the 2025 GMC Canyon — GM GENUINE 86548024.

This table covers the fluids specified for the transfer case. Typical signs include discolored fluid, a burnt smell, or a level that keeps dropping. Use only the specification in the notes — the tables group grades because they are not interchangeable. Read more

12 Transfer Case Fluid parts are listed for the 2025 GMC Canyon, from VALVOLINE, PENTOSIN, ACDELCO and 1 other brand. ACDELCO 109394 carries the "Popular" badge.

The ATF 64 section lists 2 options from PENTOSIN — grouped under the catalog's "ATF 64" designation — the notes column spells out what sets them apart. PENTOSIN 1058113 is listed in this group.

In the Dexron grade, ACDELCO, VALVOLINE and MOBIL supply 5 parts: grouped under the catalog's "Dexron" designation — the notes column spells out what sets them apart. A representative part number is ACDELCO 109394.

In the Multi-Vehicle grade, VALVOLINE and MOBIL supply 4 parts: grouped under the catalog's "Multi-Vehicle" designation — the notes column spells out what sets them apart. A representative part number is VALVOLINE VV3246.

1 ungrouped part is not assigned to a grade, with the same engine-level match.

This table covers the gaskets that seal the Transfer Case. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: GM GENUINE 86816628.

This table covers the Transfer Case housings. Read more

This group shows a single part: GM GENUINE 84962843.

This table covers the Transfer Case Housing extensions. Read more

One part is listed for the 2025 GMC Canyon — GM GENUINE 84962853.

This table covers the Transfer Case Housing plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

This group shows a single part: GM GENUINE 19133165.

This table covers the Transfer Case Input shafts. Read more

GM GENUINE supplies both parts for the 2025 GMC Canyon. All of them fit every engine offered in the 2025 Canyon.

Part numbers include GM GENUINE 23441659 and GM GENUINE 84124164.

This table covers the Transfer Case Input Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

One part is listed for the 2025 GMC Canyon — GM GENUINE 19133006.

This table covers the Transfer Case Input Shaft Pilot bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

One part is listed for the 2025 GMC Canyon — GM GENUINE 19132983.

This table covers the seals at the Transfer Case Input Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Transfer Case Input Shaft Seal parts for the 2025 GMC Canyon come from 2 brands — ELRING and GM GENUINE. 1 part fits every engine; the other 1 is engine-specific.

Listed part numbers: ELRING B16870 and GM GENUINE 19299084.

This table covers the Transfer Case motors. Typical signs include no motion, a squeal, or a motor that only runs on one speed. Confirm power, ground and the control module before replacing the motor. Read more

2 Transfer Case Motor parts for the 2025 GMC Canyon come from 2 brands — GM GENUINE and STANDARD MOTOR PRODUCTS. Every part fits both the 2.7L L4 Turbocharged and the 5.3L V8.

Listed part numbers: GM GENUINE 84660077 and STANDARD MOTOR PRODUCTS TCM102.

This table covers the Transfer Case Oil drain plugs. Read more

One part is listed for the 2025 GMC Canyon — GM GENUINE 11601929.

This table covers the Transfer Case Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

One part is listed for the 2025 GMC Canyon — GM GENUINE 84888175.

This table covers the Transfer Case Output shafts. Read more

2 Transfer Case Output Shaft parts for the 2025 GMC Canyon come from GM GENUINE. Every part fits both the 2.7L L4 Turbocharged and the 5.3L V8.

Part numbers include GM GENUINE 84962836 and GM GENUINE 84962850.

This table covers the Transfer Case Output Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

3 Transfer Case Output Shaft Bearing parts for the 2025 GMC Canyon come from GM GENUINE. Every part fits both the 2.7L L4 Turbocharged and the 5.3L V8.

This group includes GM GENUINE 19133127, GM GENUINE 19133136 and GM GENUINE 84962848.

This table covers the Transfer Case Output Shaft bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

This group shows a single part: GM GENUINE 15665313.

This table covers the seals at the Transfer Case Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

GM GENUINE supplies both parts for the 2025 GMC Canyon. All of them fit every engine offered in the 2025 Canyon.

Part numbers include GM GENUINE 24233898 and GM GENUINE 84368195.

This table covers the planetary carriers in the transfer case. Read more

One part is listed for the 2025 GMC Canyon — GM GENUINE 19299090.

This table covers the Transfer Case Range position sensors. Typical signs include a stall, a no-start, or a code for cam or crank correlation. Check the connector and the reluctor gap before replacing the sensor. Read more

One part is listed for the 2025 GMC Canyon — GM GENUINE 84368196.

This table covers the forks that move a transfer-case shift collar. Read more

One part is listed for the 2025 GMC Canyon — GM GENUINE 23488114.

This table covers the Transfer Case Shift Fork inserts. Read more

This group shows a single part: GM GENUINE 19260066.

This table covers the Transfer Case sprockets. Read more

2 Transfer Case Sprocket parts for the 2025 GMC Canyon come from GM GENUINE. Every part fits both the 2.7L L4 Turbocharged and the 5.3L V8.

Part numbers include GM GENUINE 84962847 and GM GENUINE 84962852.

This table covers the Transfer Case Thrust washers. Read more

One part is listed for the 2025 GMC Canyon — GM GENUINE 19300746.

This table covers the vents on the transfer case. Read more

This group shows a single part: GM GENUINE 84826912.

This table covers the U-joints in the driveshaft. Read more

5 Universal Joint parts are listed for the 2025 GMC Canyon, from GMB, GM GENUINE and MOOG. GMB 2100178 carries the "Popular" badge. All of them fit every engine offered in the 2025 Canyon.

The Heavy Duty section lists 1 option from GMB — rated for severe service. GMB 2150178 is listed in this group.

The Standard Replacement section lists 4 options from GMB, GM GENUINE and MOOG — built to original-equipment specification. GMB 2100178 is listed in this group.

Listed part numbers: GMB 2100178, GMB 2150178 and GM GENUINE 84807275, plus the other parts above.

This table covers the C-clips that retain a U-joint bearing cup. Read more

One part is listed for the 2025 GMC Canyon — GM GENUINE 23471512.