2019 GMC Canyon Drivetrain Parts

This table covers the actuators that engage four-wheel drive at the transfer case or axle. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

2 4WD Actuator parts are listed for the 2019 GMC Canyon, from GM GENUINE and WELLS. All of them fit every engine offered in the 2019 Canyon.

Listed part numbers: GM GENUINE 84630666 and WELLS 1S15510.

This table covers the 4WD Actuator Clutch sleeves. Read more

This group shows a single part: GM GENUINE 23471875.

This table covers the forks a 4WD actuator moves. Read more

One part is listed for the 2019 GMC Canyon — GM GENUINE 23471871.

This table covers the 4WD Actuator housings. Read more

This group shows a single part: GM GENUINE 84242534.

This table covers the disconnects that freewheel a front axle in two-wheel drive. Read more

This group shows a single part: GM GENUINE 84522876.

This table covers the Axle / Differential assemblies. Read more

GM GENUINE supplies both parts for the 2019 GMC Canyon. 1 part fits every engine; the other 1 is engine-specific.

Listed part numbers: GM GENUINE 84890234 and GM GENUINE 23471889.

This table covers the Axle bumpers. Read more

This group shows a single part: GM GENUINE 23203561.

This table covers the Axle housings. Read more

2 Axle Housing parts for the 2019 GMC Canyon come from 2 brands — ACDELCO and GM GENUINE. 1 part fits every engine; the other 1 is engine-specific.

This group includes ACDELCO 84379386 and GM GENUINE 85019804.

This table covers the Axle shafts. Read more

GM GENUINE supplies the 5 Axle Shaft parts for the 2019 GMC Canyon. GM GENUINE 23273416 carries the "Popular" badge. 3 parts fit every engine; the other 2 are engine-specific.

Part numbers include GM GENUINE 23273416, GM GENUINE 85579602 and GM GENUINE 23273417, among others listed above.

This table covers the Axle Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

4 Axle Shaft Bearing parts are listed for the 2019 GMC Canyon, from ACDELCO, DANA, GM GENUINE and 1 other brand. All of them fit every engine offered in the 2019 Canyon.

Listed part numbers: ACDELCO 23490337, DANA 5660662 and GM GENUINE 84572373, plus the other parts above.

This table covers the Axle Shaft Housing tubes. Read more

One part is listed for the 2019 GMC Canyon — GM GENUINE 84926902.

This table covers the Axle Shaft Lock / Snap rings. Read more

GM GENUINE supplies both parts for the 2019 GMC Canyon. All of them fit every engine offered in the 2019 Canyon.

This group includes GM GENUINE 23471872 and GM GENUINE 23474671.

This table covers the Axle Shaft retainers and clips. Read more

2 Axle Shaft Retainer / Clip parts for the 2019 GMC Canyon come from 2 brands — DANA and GM GENUINE. Every part fits all 3 engine options (2.5L L4, 2.8L L4 DIESEL Turbocharged and 3.6L V6).

Part numbers include DANA 44281 and GM GENUINE 23490368.

This table covers the seals where an axle shaft exits the housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Axle Shaft Seal parts for the 2019 GMC Canyon come from 2 brands — TIMKEN and GM GENUINE. Every part fits all 3 engine options (2.5L L4, 2.8L L4 DIESEL Turbocharged and 3.6L V6).

Listed part numbers: GM GENUINE 291345, TIMKEN SL260314 and TIMKEN SL260498.

This table covers the complete CV axle shafts from differential (or hub) to wheel. Typical signs include a click in tight turns, grease flung around the wheel well, or a vibration that builds with speed. A torn boot caught early is a boot kit; caught late it is the whole axle. Torque the axle nut to the method in the notes. Read more

6 CV Axle parts for the 2019 GMC Canyon come from 5 brands — GSP, TOP NOTCH, APWI and 2 other brands. The "Popular" part is APWI GM8503. Every part fits all 3 engine options (2.5L L4, 2.8L L4 DIESEL Turbocharged and 3.6L V6).

In the Specialty - For Lifted Vehicles grade, GSP and TOP NOTCH supply 2 parts: grouped under the catalog's "Specialty - For Lifted Vehicles" designation — the notes column spells out what sets them apart. A representative part number is GSP NCV10183XDP.

In the Standard Replacement grade, APWI, TRAKMOTIVE, GM GENUINE and 1 other brand supply 4 parts: built to original-equipment specification. A representative part number is APWI GM8503.

Listed part numbers: APWI GM8503, GSP NCV10183XDP and TOP NOTCH TN20196XDP, plus the other parts above.

This table covers the boots that keep grease in a CV joint. Typical signs include a split boot, grease flung around the joint, or a click once grit is inside. A boot caught early is a kit. Once the joint has clicked, the joint itself is usually worn. Read more

This group shows a single part: GM GENUINE 84576036.

This table covers the bands that clamp a CV boot to the joint. Read more

GM GENUINE supplies the 5 CV Joint Boot Band parts for the 2019 GMC Canyon. All of them fit every engine offered in the 2019 Canyon.

This group includes GM GENUINE 23474665, GM GENUINE 23474666 and GM GENUINE 23474667 and the remaining parts above.

This table covers the CV Joint Lock rings. Read more

One part is listed for the 2019 GMC Canyon — GM GENUINE 23490371.

This table covers the carriers that hold the differential gears in the axle. Read more

6 Differential Carrier parts for the 2019 GMC Canyon come from GM GENUINE. The "Popular" part is GM GENUINE 84640877. 1 part fits every engine; the other 5 are engine-specific.

Listed part numbers: GM GENUINE 84640877, GM GENUINE 85549947 and GM GENUINE 22954507, plus the other parts above.

This table covers the bearings and races that support the differential carrier. Read more

6 Differential Carrier Bearing / Race parts for the 2019 GMC Canyon come from 3 brands — GM GENUINE, SCHAEFFLER and TIMKEN. The "Popular" part is GM GENUINE S1410. Every part fits all 3 engine options (2.5L L4, 2.8L L4 DIESEL Turbocharged and 3.6L V6).

Listed part numbers: GM GENUINE S1410, TIMKEN 32010X and GM GENUINE S1409, plus the other parts above.

This table covers the Differential Carrier bolts. Read more

One part is listed for the 2019 GMC Canyon — GM GENUINE 11589358.

This table covers the Differential Carrier bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

This group shows a single part: GM GENUINE 84370076.

This table covers the Differential Carrier shims. Read more

10 Differential Carrier Shim parts are listed for the 2019 GMC Canyon, from GM GENUINE and MOTIVE GEAR. GM GENUINE 23471910 carries the "Popular" badge. 3 parts fit every engine; the other 7 are engine-specific.

This table covers the Differential covers. Read more

GM GENUINE supplies the 3 Differential Cover parts for the 2019 GMC Canyon. 2 parts fit every engine; the other 1 is engine-specific.

Part numbers include GM GENUINE 23471892, GM GENUINE 23490350 and GM GENUINE 23490349.

This table covers the Differential Cover bolts. Read more

This group shows a single part: GM GENUINE 11603161.

This table covers the gaskets that seal the Differential Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Differential Cover Gasket parts for the 2019 GMC Canyon come from 2 brands — GM GENUINE and FEL-PRO. 2 parts fit every engine; the other 2 are engine-specific.

This group includes FEL-PRO RDS55503, GM GENUINE 23490353 and GM GENUINE 23490354 and the remaining parts above.

This table covers the Differential Cross pins. Read more

GM GENUINE supplies the 3 Differential Cross Pin parts for the 2019 GMC Canyon. 2 parts fit every engine; the other 1 is engine-specific.

Part numbers include GM GENUINE 23490376, GM GENUINE 23471870 and GM GENUINE 23490375.

This table covers the Differential Crush sleeves. Read more

One part is listed for the 2019 GMC Canyon — USA STANDARD GEAR USA11138.

This table covers the Differential Fill drain plugs. Read more

2 Differential Fill / Drain Plug parts for the 2019 GMC Canyon come from 2 brands — DANA and GM GENUINE. Every part fits all 3 engine options (2.5L L4, 2.8L L4 DIESEL Turbocharged and 3.6L V6).

This group includes DANA 20195531 and GM GENUINE 23471884.

This table covers the brackets that mount the Differential Mount. Typical signs include a cracked mount, a rattle, or a bracket that no longer holds alignment. Confirm position in the notes. Many brackets look alike and bolt to different corners. Read more

One part is listed for the 2019 GMC Canyon — GM GENUINE 23490340.

This table covers the bearings and races on the differential pinion. Read more

8 Differential Pinion Bearing / Race parts are listed for the 2019 GMC Canyon, from GM GENUINE, DANA and SKF. GM GENUINE S1411 carries the "Popular" badge. 3 parts fit every engine; the other 5 are engine-specific.

Part numbers include GM GENUINE S1411, GM GENUINE 85617857 and DANA 10001045, among others listed above.

This table covers the baffles that control oil at the pinion bearings. Read more

GM GENUINE supplies the 3 Differential Pinion Bearing Baffle parts for the 2019 GMC Canyon. 2 parts fit every engine; the other 1 is engine-specific.

This group includes GM GENUINE 23490399, GM GENUINE 23490398 and GM GENUINE 23471955.

This table covers the Differential Pinion nuts. Read more

3 Differential Pinion Nut parts for the 2019 GMC Canyon come from GM GENUINE. 2 parts fit every engine; the other 1 is engine-specific.

Part numbers include GM GENUINE 23493140, GM GENUINE 23493141 and GM GENUINE 11547790.

This table covers the seals at the differential pinion yoke. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

8 Differential Pinion Seal parts for the 2019 GMC Canyon come from 4 brands — GM GENUINE, TIMKEN, NATIONAL and 1 other brand. The "Popular" part is GM GENUINE 84053573. 3 parts fit every engine; the other 5 are engine-specific.

Listed part numbers: GM GENUINE 84053573, NATIONAL 711145 and SKF 21072A, plus the other parts above.

This table covers the Differential Pinion Shaft Lock bolts. Read more

One part is listed for the 2019 GMC Canyon — GM GENUINE 23493144.

This table covers the Differential Pinion shims. Read more

6 Differential Pinion Shim parts for the 2019 GMC Canyon come from GM GENUINE. The "Popular" part is GM GENUINE 23471902. Every part fits all 3 engine options (2.5L L4, 2.8L L4 DIESEL Turbocharged and 3.6L V6).

This group includes GM GENUINE 23471902, GM GENUINE 23471901 and GM GENUINE 23471903 and the remaining parts above.

This table covers kits that group the bearings, races and seals for a differential rebuild. Read more

6 Differential Rebuild Kit parts are listed for the 2019 GMC Canyon, from BCA and USA STANDARD GEAR. USA STANDARD GEAR USA11139 carries the "Popular" badge. All of them fit every engine offered in the 2019 Canyon.

In the Master Kit grade, BCA and USA STANDARD GEAR supply 3 parts: grouped under the catalog's "Master Kit" designation — the notes column spells out what sets them apart. A representative part number is USA STANDARD GEAR USA11139.

The Standard Kit section lists 3 options from BCA — grouped under the catalog's "Standard Kit" designation — the notes column spells out what sets them apart. BCA NBDRK367 is listed in this group.

This group includes USA STANDARD GEAR USA11139, BCA NBDRK369MK and BCA NBDRK367MK and the remaining parts above.

This table covers the ring-and-pinion gear sets that set the axle ratio. Read more

9 Differential Ring and Pinion parts for the 2019 GMC Canyon come from 3 brands — DANA, AAM and GM GENUINE. The "Popular" part is DANA 10004299. 6 parts fit every engine; the other 3 are engine-specific.

Part numbers include DANA 10004299, DANA 10005797 and AAM 40020428, among others listed above.

This table covers the Differential Ring Gear bolts. Read more

This group shows a single part: GM GENUINE 11549347.

This table covers the Differential Spider gears. Read more

6 Differential Spider Gear parts for the 2019 GMC Canyon come from 3 brands — GM GENUINE, DANA and AAM. 3 parts fit every engine; the other 3 are engine-specific.

This group includes AAM 74043199, DANA 10001183 and DANA 10001239 and the remaining parts above.

This table covers the Differential washers. Read more

3 Differential Washer parts for the 2019 GMC Canyon come from GM GENUINE. 2 parts fit every engine; the other 1 is engine-specific.

Part numbers include GM GENUINE 23483008, GM GENUINE 23490400 and GM GENUINE 23490403.

This table covers the driveshafts that carry torque from the transmission or transfer case. Read more

9 Drive Shaft parts are listed for the 2019 GMC Canyon, from GM GENUINE, DORMAN, SKP and 1 other brand. GM GENUINE 84076334 carries the "Popular" badge. 5 parts fit every engine; the other 4 are engine-specific.

Part numbers include GM GENUINE 84076334, GM GENUINE 85109715 and SKP SK938394, among others listed above.

This table covers the Drive Shaft bolts. Read more

2 Drive Shaft Bolt parts for the 2019 GMC Canyon come from GM GENUINE. Every part fits all 3 engine options (2.5L L4, 2.8L L4 DIESEL Turbocharged and 3.6L V6).

This group includes GM GENUINE 11548472 and GM GENUINE 11588811.

This table covers the gaskets that seal the Drive Shaft CV Joint. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2019 GMC Canyon — GM GENUINE 23471896.

This table covers the Drive Shaft End yokes. Read more

This group shows a single part: GM GENUINE 84506244.

This table covers the Drive Shaft retainers. Read more

GM GENUINE supplies both parts for the 2019 GMC Canyon. All of them fit every engine offered in the 2019 Canyon.

Part numbers include GM GENUINE 23107857 and GM GENUINE 11546810.

This table covers the Drive Shaft Slip yokes. Read more

One part is listed for the 2019 GMC Canyon — GM GENUINE 23256322.

This table covers the gear oils specified for the axle or transfer case. Typical signs include a low-oil lamp, knocking, or oil that has gone thin before the next interval. Match the viscosity and spec in the notes, not just the weight on the bottle. Read more

5 Gear Oil parts for the 2019 GMC Canyon come from 2 brands — VALVOLINE and ACDELCO. The "Popular" part is VALVOLINE VV975. Every part fits all 3 engine options (2.5L L4, 2.8L L4 DIESEL Turbocharged and 3.6L V6).

Part numbers include VALVOLINE VV975, ACDELCO 104108 and VALVOLINE 889785, among others listed above.

This table covers the Gear Oil additives. Read more

This group shows a single part: USA STANDARD GEAR USA15018.

This table covers the Transfer Case adapters. Read more

One part is listed for the 2019 GMC Canyon — GM GENUINE 84263509.

This table covers the Transfer Case assemblies. Read more

This group shows a single part: GM GENUINE 24285444.