1965 Griffith 200 Engine Parts

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

KING ENGINE BEARINGS supplies the 9 Connecting Rod Bearing parts for the 1965 Griffith 200. KING ENGINE BEARINGS CR804SI carries the "Popular" badge.

In the High Performance grade, KING ENGINE BEARINGS supplies 7 parts: engineered beyond original-equipment specification. A representative part number is KING ENGINE BEARINGS CR804HPN.

The Standard Replacement section lists 2 options from KING ENGINE BEARINGS — built to original-equipment specification. KING ENGINE BEARINGS CR804SI is listed in this group.

Listed part numbers: KING ENGINE BEARINGS CR804SI, KING ENGINE BEARINGS CR804HPN and KING ENGINE BEARINGS CR804HPNX, plus the other parts above.

This table covers the Connecting Rod bolts. Read more

This group shows a single part: ARP 1546002.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

2 Conversion / Lower Gasket Set parts are listed for the 1965 Griffith 200, from FEL-PRO and VICTOR REINZ.

Listed part numbers: FEL-PRO CS85484 and VICTOR REINZ 081009401.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

7 Crankshaft Main Bearing parts for the 1965 Griffith 200 come from KING ENGINE BEARINGS. The "Popular" part is KING ENGINE BEARINGS MB529XP.

The High Performance section: 5 options from KING ENGINE BEARINGS. KING ENGINE BEARINGS MB529XP is listed in this group.

Standard Replacement: 2 parts, from KING ENGINE BEARINGS. A representative part number is KING ENGINE BEARINGS MB529SI.

Part numbers include KING ENGINE BEARINGS MB529XP, KING ENGINE BEARINGS MB529HP and KING ENGINE BEARINGS MB529HPX, among others listed above.

This table covers the Crankshaft Main Bearing Cap bolts. Read more

One part is listed for the 1965 Griffith 200 — ARP 1545001.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Crankshaft Seal parts for the 1965 Griffith 200 come from 2 brands — FEL-PRO and VICTOR REINZ.

Part numbers include FEL-PRO BS30136 and VICTOR REINZ 191015601.

This table covers the bolts that clamp the cylinder head to the block. Read more

ARP supplies the 4 Cylinder Head Bolt parts for the 1965 Griffith 200.

Part numbers include ARP 1543601, ARP 1543701 and ARP 4543601, among others listed above.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Cylinder Head Gasket parts are listed for the 1965 Griffith 200, from FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ. FEL-PRO 9333PT1 carries the "Popular" badge.

This group includes FEL-PRO 9333PT1, FEL-PRO 8548PT2 and MAHLE / CLEVITE 3428 and the remaining parts above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

3 Cylinder Head Gasket Set parts are listed for the 1965 Griffith 200, from FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.

This group includes FEL-PRO HS8548PT11, MAHLE / CLEVITE HS3530VJ and VICTOR REINZ 021060201.

This table covers the Cylinder Head Spacer shims. Read more

2 Cylinder Head Spacer Shim parts are listed for the 1965 Griffith 200, from MAHLE / CLEVITE and VICTOR REINZ.

Listed part numbers: MAHLE / CLEVITE 3428SH and VICTOR REINZ 711638100.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

2 Engine Kit Gasket Set parts are listed for the 1965 Griffith 200, from FEL-PRO and VICTOR REINZ.

Listed part numbers: FEL-PRO FS8548PT16 and VICTOR REINZ 011005801.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

ENGINE PRO supplies the 7 Harmonic Balancer parts for the 1965 Griffith 200. ENGINE PRO PB1203ST carries the "Popular" badge.

Part numbers include ENGINE PRO PB1203ST, ENGINE PRO PB1008ST and ENGINE PRO PB1009ST, among others listed above.

This table covers the wear sleeves used to restore a Harmonic Balancer seal surface. Read more

This group shows a single part: MAHLE / CLEVITE 66595RS.

This table covers the Intake Manifold bolts. Read more

ARP supplies the 3 Intake Manifold Bolt parts for the 1965 Griffith 200.

This group includes ARP 1542001, ARP 4542001 and ARP 4542101.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Intake Manifold Gasket parts are listed for the 1965 Griffith 200, from FEL-PRO, VICTOR REINZ and MAHLE / CLEVITE. FEL-PRO MS901031 carries the "Popular" badge.

Part numbers include FEL-PRO MS901031, FEL-PRO MS901161 and MAHLE / CLEVITE 95010SG, among others listed above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Oil Drain Plug Gasket parts are listed for the 1965 Griffith 200, from FEL-PRO and VICTOR REINZ.

Part numbers include FEL-PRO 70822 and VICTOR REINZ 711346200.

This table covers the Oil Pan bolts. Read more

This group shows a single part: ARP 2541802.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

7 Oil Pan Gasket parts for the 1965 Griffith 200 come from 4 brands — FEL-PRO, MAHLE / CLEVITE, VICTOR REINZ and 1 other brand. The "Popular" part is FEL-PRO OS13260C.

This group includes FEL-PRO OS13260C, FEL-PRO OS13260T and ENGINE PRO 3113260 and the remaining parts above.

This table covers the gaskets that seal the Oil Pump. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Oil Pump Gasket parts are listed for the 1965 Griffith 200, from FEL-PRO and VICTOR REINZ.

Listed part numbers: FEL-PRO 70083 and VICTOR REINZ 711462300.

This table covers the gaskets that seal the Oil Pump Pickup Tube. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Oil Pump Pickup Tube Gasket parts are listed for the 1965 Griffith 200, from FEL-PRO and VICTOR REINZ.

Part numbers include FEL-PRO 72516 and VICTOR REINZ 711350300.

This table covers the Oil Pump shafts. Read more

This group shows a single part: ARP 1547904.

This table covers the pistons that travel in each cylinder. Typical signs include knock, blow-by, or a cylinder that will not hold compression. Piston work is a short-block job. Match bore, pin and ring pack in the notes — not the photo. Read more

SILV-O-LITE supplies the 5 Piston parts for the 1965 Griffith 200. SILV-O-LITE 3101HC carries the "Popular" badge.

The Premium section lists 3 options from SILV-O-LITE — a step above OE specification in materials, tolerances or warranty terms. SILV-O-LITE 3101HC is listed in this group.

The Standard Replacement section: 2 options from SILV-O-LITE. SILV-O-LITE 1157 is listed in this group.

Listed part numbers: SILV-O-LITE 3101HC, SILV-O-LITE 1177HC and SILV-O-LITE S1177HC, plus the other parts above.

This table covers the Timing Cover bolts. Read more

4 Timing Cover Bolt parts for the 1965 Griffith 200 come from ARP.

Listed part numbers: ARP 1543202, ARP 1543201 and ARP 1543204, plus the other parts above.

This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Timing Cover Gasket parts for the 1965 Griffith 200 come from 2 brands — FEL-PRO and VICTOR REINZ.

Listed part numbers: FEL-PRO TCS45008, FEL-PRO TCS45168 and VICTOR REINZ 151025301, plus the other parts above.

This table covers the wear sleeves used to restore a Timing Cover seal surface. Read more

2 Timing Cover Repair Sleeve parts for the 1965 Griffith 200 come from 2 brands — FEL-PRO and VICTOR REINZ.

Listed part numbers: FEL-PRO 16213 and VICTOR REINZ 711346500.

This table covers the Timing Cover Repair Sleeve tools. This is a service tool, not a wear part — match the application in the notes. Read more

This group shows a single part: VICTOR REINZ 711541700.

This table covers the Valve covers. Read more

One part is listed for the 1965 Griffith 200 — ENGINE PRO 311684.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

7 Valve Cover Gasket parts for the 1965 Griffith 200 come from 2 brands — FEL-PRO and VICTOR REINZ. The "Popular" part is FEL-PRO VS13264T.

Premium: 2 parts, from FEL-PRO and VICTOR REINZ. A representative part number is FEL-PRO VS13264T.

Standard Replacement: 5 parts, from FEL-PRO and VICTOR REINZ. A representative part number is FEL-PRO VS50029C.

This group includes FEL-PRO VS13264T, VICTOR REINZ 151064301 and FEL-PRO VS50029C and the remaining parts above.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Valve Stem Seal parts for the 1965 Griffith 200 come from 2 brands — FEL-PRO and VICTOR REINZ.

This group includes FEL-PRO SS133641, FEL-PRO SS72562 and VICTOR REINZ 121005801 and the remaining parts above.