1966 Griffith 200 Engine Parts

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

3 Conversion / Lower Gasket Set parts for the 1966 Griffith 200 come from 3 brands — FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.

Listed part numbers: FEL-PRO CS8553, MAHLE / CLEVITE CS3536B and VICTOR REINZ 081009701.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Crankshaft Seal parts are listed for the 1966 Griffith 200, from FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.

Part numbers include FEL-PRO BS40245, MAHLE / CLEVITE JV606 and VICTOR REINZ 191014701.

This table covers the bolts that clamp the cylinder head to the block. Read more

2 Cylinder Head Bolt parts for the 1966 Griffith 200 come from ARP.

Part numbers include ARP 1443601 and ARP 1443602.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Cylinder Head Gasket parts for the 1966 Griffith 200 come from 3 brands — FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.

Part numbers include FEL-PRO 8553PT, FEL-PRO 521SD and MAHLE / CLEVITE 3536SG, among others listed above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

2 Cylinder Head Gasket Set parts for the 1966 Griffith 200 come from 2 brands — FEL-PRO and VICTOR REINZ.

This group includes FEL-PRO HS8553PT9 and VICTOR REINZ 021033901.

This table covers the Cylinder Head Spacer shims. Read more

This group shows a single part: VICTOR REINZ 711638000.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

4 Engine Kit Gasket Set parts for the 1966 Griffith 200 come from 3 brands — VICTOR REINZ, FEL-PRO and MAHLE / CLEVITE.

Part numbers include FEL-PRO FS8553PT9, MAHLE / CLEVITE 953338 and VICTOR REINZ 011003401, among others listed above.

This table covers the Intake Manifold bolts. Read more

This group shows a single part: ARP 1442001.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Intake Manifold Gasket parts for the 1966 Griffith 200 come from 3 brands — FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.

Listed part numbers: FEL-PRO MS90009, MAHLE / CLEVITE MS15148 and VICTOR REINZ 111013401.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Oil Drain Plug Gasket parts for the 1966 Griffith 200 come from 3 brands — FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.

This group includes FEL-PRO 70822, MAHLE / CLEVITE 2051 and VICTOR REINZ 711346200.

This table covers the gaskets that seal the Oil Filter. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Oil Filter Gasket parts for the 1966 Griffith 200 come from 3 brands — FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.

Part numbers include FEL-PRO 70078, MAHLE / CLEVITE 72239 and VICTOR REINZ 711462500.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Oil Pan Gasket parts are listed for the 1966 Griffith 200, from FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.

Listed part numbers: FEL-PRO OS6566C1, MAHLE / CLEVITE OS30520X and VICTOR REINZ 101015801.

This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Timing Cover Gasket parts are listed for the 1966 Griffith 200, from FEL-PRO, VICTOR REINZ and MAHLE / CLEVITE. FEL-PRO TCS65631 carries the "Popular" badge.

This group includes FEL-PRO TCS65631, FEL-PRO TCS45284 and MAHLE / CLEVITE T27787 and the remaining parts above.

This table covers the wear sleeves used to restore a Timing Cover seal surface. Read more

2 Timing Cover Repair Sleeve parts are listed for the 1966 Griffith 200, from FEL-PRO and VICTOR REINZ.

Listed part numbers: FEL-PRO 16201 and VICTOR REINZ 711454800.

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 1966 Griffith 200 — MAHLE / CLEVITE 64573.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Valve Cover Gasket parts are listed for the 1966 Griffith 200, from MAHLE / CLEVITE, VICTOR REINZ and FEL-PRO. FEL-PRO VS13395 carries the "Popular" badge.

Part numbers include FEL-PRO VS13395, MAHLE / CLEVITE VS39569 and MAHLE / CLEVITE VS39569R, among others listed above.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Valve Stem Seal parts are listed for the 1966 Griffith 200, from MAHLE / CLEVITE and VICTOR REINZ.

Part numbers include MAHLE / CLEVITE SS45298 and VICTOR REINZ 121007501.