1995 Honda Prelude Engine Parts

This table covers the Balance Shaft belts. Typical signs include squeal on cold start, cracked ribs, or glazing. Spin the tensioner and idlers by hand while the belt is off. Read more

13 Balance Shaft Belt parts for the 1995 Honda Prelude come from 12 brands — GATES, CLOYES, ITM ENGINE COMPONENTS and 9 other brands. The "Popular" part is CLOYES B186.

The Economy section lists 4 options from CLOYES, ITM ENGINE COMPONENTS, PREFERRED COMPONENTS INC and 1 other brand — the catalog's value-priced group. CLOYES B186 is listed in this group.

The High Performance section lists 1 option from GATES — engineered beyond original-equipment specification. GATES T186RB is listed in this group.

In the Standard Replacement grade, CONTINENTAL, GATES, ACDELCO and 5 other brands supply 8 parts: built to original-equipment specification. A representative part number is CONTINENTAL 40186.

This table covers the Balance Shaft Belt tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

11 Balance Shaft Belt Tensioner parts are listed for the 1995 Honda Prelude, from CLOYES, GMB, JAPANESE OE and 8 other brands. CLOYES 95204 carries the "Popular" badge.

This table covers the seals at the Balance Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Balance Shaft Seal parts for the 1995 Honda Prelude come from 4 brands — BCA, CONTINENTAL, ITM ENGINE COMPONENTS and 1 other brand.

This group includes BCA NS712009, CONTINENTAL CS9021 and ITM ENGINE COMPONENTS 1500917 and the remaining parts above.

This table covers the Camshaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

This group shows a single part: DURA-BOND HA3.

This table covers the wear sleeves used to restore a Camshaft seal surface. Read more

4 Camshaft Repair Sleeve parts are listed for the 1995 Honda Prelude, from SCHAEFFLER, SKF, TIMKEN and 1 other brand.

This group includes SCHAEFFLER SR3461, SKF 99111 and TIMKEN KWK99111 and the remaining parts above.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

15 Camshaft Seal parts are listed for the 1995 Honda Prelude, from AUTO EXTRA, FEL-PRO, MAHLE / CLEVITE and 11 other brands. FEL-PRO TCS45898 carries the "Popular" badge.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

11 Connecting Rod Bearing parts for the 1995 Honda Prelude come from 6 brands — MAHLE / CLEVITE, KING ENGINE BEARINGS, SEALED POWER and 3 other brands. The "Popular" part is ENGINETECH BB1520.

The High Performance section: 3 options from MAHLE / CLEVITE and KING ENGINE BEARINGS. KING ENGINE BEARINGS CR4033XP is listed in this group.

Standard Replacement: 8 parts, from MAHLE / CLEVITE, SEALED POWER, ENGINETECH and 3 other brands. A representative part number is ENGINETECH BB1520.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

7 Conversion / Lower Gasket Set parts for the 1995 Honda Prelude come from 7 brands — APEX, ENGINETECH, AJUSA and 4 other brands. The "Popular" part is APEX ACS1014.

This group includes APEX ACS1014, ENGINETECH HO22CS and AJUSA 54074100 and the remaining parts above.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

8 Crankshaft Main Bearing parts are listed for the 1995 Honda Prelude, from KING ENGINE BEARINGS, TOPLINE, ENGINETECH and 3 other brands. ENGINETECH BC2200 carries the "Popular" badge.

High Performance: 1 part, from KING ENGINE BEARINGS. A representative part number is KING ENGINE BEARINGS MB5168XP.

The Standard Replacement section: 7 options from TOPLINE, ENGINETECH, MAHLE / CLEVITE and 3 other brands. ENGINETECH BC2200 is listed in this group.

This group includes ENGINETECH BC2200, KING ENGINE BEARINGS MB5168XP and MAHLE / CLEVITE MS2012P and the remaining parts above.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

7 Crankshaft Repair Sleeve parts are listed for the 1995 Honda Prelude, from SCHAEFFLER, TIMKEN, BCA and 2 other brands. BCA NS99315 carries the "Popular" badge.

This group includes BCA NS99315, FEL-PRO 16275 and SCHAEFFLER SR3483 and the remaining parts above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

23 Crankshaft Seal parts are listed for the 1995 Honda Prelude, from VICTOR REINZ, APEX, FEL-PRO and 11 other brands. APEX ABS100 carries the "Popular" badge.

This table covers the bolts that clamp the cylinder head to the block. Read more

3 Cylinder Head Bolt parts for the 1995 Honda Prelude come from 3 brands — APEX, ARP and MAHLE / CLEVITE.

Part numbers include APEX AHB114, ARP 2084304 and MAHLE / CLEVITE GS33407.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

9 Cylinder Head Gasket parts for the 1995 Honda Prelude come from 8 brands — ITM ENGINE COMPONENTS, FEL-PRO, ULTRA-POWER and 5 other brands. The "Popular" part is FEL-PRO 9851PT.

Listed part numbers: FEL-PRO 9851PT and AJUSA 10093000, plus the other parts above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

12 Cylinder Head Gasket Set parts for the 1995 Honda Prelude come from 9 brands — ITM ENGINE COMPONENTS, VICTOR REINZ, ENGINETECH and 6 other brands. The "Popular" part is ENGINETECH HO22HSA.

This table covers the Cylinder Head plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

2 Cylinder Head Plug parts are listed for the 1995 Honda Prelude, from JAPANESE OE and MAHLE / CLEVITE.

This group includes JAPANESE OE KF811285 and MAHLE / CLEVITE B32774.

This table covers the Cylinder Head Spacer shims. Read more

2 Cylinder Head Spacer Shim parts for the 1995 Honda Prelude come from 2 brands — ENGINETECH and SBI.

Listed part numbers: ENGINETECH CHS1037 and SBI 2302122.

This table covers the wear sleeves used to restore a Cylinder seal surface. Read more

This group shows a single part: MELLING CSL717.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

One part is listed for the 1995 Honda Prelude — KAT'S HEATERS 11419.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

6 Engine Kit Gasket Set parts for the 1995 Honda Prelude come from 6 brands — ENGINETECH, ITM ENGINE COMPONENTS, AJUSA and 3 other brands. The "Popular" part is ENGINETECH HO22K1.

Listed part numbers: ENGINETECH HO22K1, ITM ENGINE COMPONENTS 0900958 and AJUSA 50142300, plus the other parts above.

This table covers the Engine rebuild kits. Read more

This group shows a single part: ENGINETECH MKHO22AP.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

8 Exhaust Valve parts are listed for the 1995 Honda Prelude, from ENGINETECH, MELLING, BECK/ARNLEY and 5 other brands. ENGINETECH EM2767 carries the "Popular" badge.

Part numbers include ENGINETECH EM2767, MELLING V5198 and BECK/ARNLEY 0213323, among others listed above.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

6 Harmonic Balancer parts for the 1995 Honda Prelude come from 6 brands — SKP, ATP, DAYCO and 3 other brands. The "Popular" part is SKP SK594068.

The Economy section: 1 option from SKP. SKP SK594068 is listed in this group.

Standard Replacement: 5 parts, from ATP, DAYCO, DORMAN and 2 other brands. A representative part number is ATP 102096.

Listed part numbers: SKP SK594068, ATP 102096 and DAYCO PB1189N, plus the other parts above.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

8 Intake Manifold Gasket parts for the 1995 Honda Prelude come from 7 brands — FEL-PRO, AJUSA, APEX and 4 other brands. The "Popular" part is FEL-PRO MS94664.

Listed part numbers: FEL-PRO MS94664, FEL-PRO MS970452 and AJUSA 13109800, plus the other parts above.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Intake Plenum Gasket parts are listed for the 1995 Honda Prelude, from FEL-PRO, AJUSA, APEX and 2 other brands. FEL-PRO MS94665 carries the "Popular" badge.

Listed part numbers: FEL-PRO MS94665, AJUSA 00722600 and APEX AMS1145, plus the other parts above.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

5 Intake Valve parts are listed for the 1995 Honda Prelude, from MELLING, ENGINETECH, ITM ENGINE COMPONENTS and 2 other brands. MELLING V5197 carries the "Popular" badge.

Part numbers include MELLING V5197, ENGINETECH IM2660 and ITM ENGINE COMPONENTS RV9521, among others listed above.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

15 Motor Mount parts are listed for the 1995 Honda Prelude, from ANCHOR, DEA / MARMON RIDE CONTROL, WESTAR and 2 other brands. SKP SKMA6526 carries the "Popular" badge.

Economy: 1 part, from SKP. A representative part number is SKP SKMA6526.

The Standard Replacement section: 14 options from ANCHOR, DEA / MARMON RIDE CONTROL, WESTAR and 1 other brand. ANCHOR 8806 is listed in this group.

This table covers the Motor Mount inserts. Read more

This group shows a single part: ENERGY SUSPENSION 161103G.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

18 Oil parts are listed for the 1995 Honda Prelude, from MOBIL, VALVOLINE and IDEMITSU. MOBIL 125195 carries the "Popular" badge.

In the Full Synthetic grade, MOBIL and VALVOLINE supply 7 parts: full-synthetic oils. A representative part number is MOBIL 125195.

The High Mileage (>75,000 Miles) section lists 6 options from MOBIL and VALVOLINE — oils grouped for high-mileage engines. MOBIL 125201 is listed in this group.

In the Racing grade, IDEMITSU supplies 1 part: grouped under the catalog's "Racing" designation — the notes column spells out what sets them apart. A representative part number is IDEMITSU 30018100750.

In the Synthetic Blend grade, MOBIL and VALVOLINE supply 4 parts: synthetic-blend oils. A representative part number is MOBIL 124406.

This table covers the Oil Cooler Mounting kits. Read more

2 Oil Cooler Mounting Kit parts for the 1995 Honda Prelude come from HAYDEN.

Part numbers include HAYDEN 238 and HAYDEN 153.

This table covers the drain plugs in the oil pan. Read more

9 Oil Drain Plug parts are listed for the 1995 Honda Prelude, from DORMAN, ELRING, AGS and 3 other brands. AGS ODP00007 carries the "Popular" badge.

Part numbers include AGS ODP00007, DORMAN 090053 and BECK/ARNLEY 0160088, among others listed above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Oil Drain Plug Gasket parts for the 1995 Honda Prelude come from 6 brands — DORMAN, FEL-PRO, AJUSA and 3 other brands. The "Popular" part is DORMAN 095144.

This group includes DORMAN 095144, FEL-PRO 73346 and AJUSA 22007400 and the remaining parts above.

This table covers the caps on the oil filler neck. Read more

5 Oil Filler Cap parts are listed for the 1995 Honda Prelude, from MOTORAD, BECK/ARNLEY, CALORSTAT and 2 other brands. MOTORAD MO81 carries the "Popular" badge.

Listed part numbers: MOTORAD MO81, BECK/ARNLEY 0160125 and CALORSTAT OC2315, plus the other parts above.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

21 Oil Filter parts are listed for the 1995 Honda Prelude, from VARIOUS MFR, BOSCH, WIX and 14 other brands. BOSCH 72226WS carries the "Popular" badge.

Economy: 7 parts, from VARIOUS MFR, BOSCH, FRAM and 3 other brands. A representative part number is BOSCH 72226WS.

In the High Performance / Heavy Duty grade, WIX and MOBIL supply 2 parts: grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. A representative part number is WIX 51334XP.

The Standard Replacement section: 12 options from BOSCH, DENSO, WIX and 9 other brands. BOSCH 3323 is listed in this group.

This table covers the Oil Filter Support tubes. Read more

This group shows a single part: AUTOTECNICA HA1416938.

This table covers the oil pans that hold the engine's oil sump. Read more

8 Oil Pan parts for the 1995 Honda Prelude come from 8 brands — AUTOTECNICA, SKP, ACKOJA and 5 other brands. The "Popular" part is AUTOTECNICA HA149595.

This group includes AUTOTECNICA HA149595, SKP SK264403 and ACKOJA A260136 and the remaining parts above.