2011 Honda Civic Engine Parts

This table covers the chains that drive the balance shafts. Read more

5 Balance Shaft Chain parts are listed for the 2011 Honda Civic, from INA, S.A. GEAR and MELLING. MELLING 712F carries the "Popular" badge.

The Chain Only section lists 4 options from S.A. GEAR, MELLING and INA — grouped under the catalog's "Chain Only" designation — the notes column spells out what sets them apart. MELLING 712F is listed in this group.

In the Kit grade, INA supplies 1 part: grouped under the catalog's "Kit" designation — the notes column spells out what sets them apart. A representative part number is INA ZC76232.

Listed part numbers: MELLING 712F, INA ZCC712F and S.A. GEAR C712F, plus the other parts above.

This table covers the guides that keep the balance-shaft chain on its path. Read more

5 Balance Shaft Chain Guide parts are listed for the 2011 Honda Civic, from S.A. GEAR, BECK/ARNLEY, CLOYES and 2 other brands. S.A. GEAR 7518 carries the "Popular" badge.

Listed part numbers: S.A. GEAR 7518, BECK/ARNLEY 0241929 and CLOYES 95570, plus the other parts above.

This table covers the Balance Shaft Chain tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

2 Balance Shaft Chain Tensioner parts for the 2011 Honda Civic come from 2 brands — INA and S.A. GEAR.

Listed part numbers: INA ZT91038 and S.A. GEAR 91038.

This table covers the Balance Shaft sprockets. Read more

5 Balance Shaft Sprocket parts are listed for the 2011 Honda Civic, from MELLING, CLOYES, FVP and 2 other brands. MELLING S939 carries the "Popular" badge.

This group includes MELLING S939 and the remaining parts above.

This table covers the Camshaft caps. Typical signs include a leak at the neck, a cap that will not hold pressure, or a missing tether. Match the pressure rating or thread in the notes — radiator, reservoir and fuel caps are not interchangeable. Read more

One part is listed for the 2011 Honda Civic — AJUSA 00794900.

This table covers the Camshaft plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

One part is listed for the 2011 Honda Civic — ELRING 459380.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Camshaft Seal parts for the 2011 Honda Civic come from 4 brands — APEX, ELRING, FEL-PRO and 1 other brand.

This group includes APEX ATC1540, ELRING 290710 and FEL-PRO TCS46212 and the remaining parts above.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

14 Connecting Rod Bearing parts are listed for the 2011 Honda Civic, from KING ENGINE BEARINGS, ENGINETECH, TOPLINE and 2 other brands. ENGINETECH BB1013 carries the "Popular" badge.

In the High Performance grade, KING ENGINE BEARINGS supplies 2 parts: engineered beyond original-equipment specification. A representative part number is KING ENGINE BEARINGS CR4542XPCX.

The Standard Replacement section lists 4 options from ENGINETECH, KING ENGINE BEARINGS, ITM ENGINE COMPONENTS and 1 other brand — built to original-equipment specification. ENGINETECH BB1013 is listed in this group.

8 ungrouped parts are not assigned to a grade, with the same engine-level match.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

19 Conversion / Lower Gasket Set parts are listed for the 2011 Honda Civic, from APEX, ENGINETECH, FEL-PRO and 5 other brands. APEX ACS1050 carries the "Popular" badge.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

14 Crankshaft Main Bearing parts for the 2011 Honda Civic come from 5 brands — TOPLINE, KING ENGINE BEARINGS, ENGINETECH and 2 other brands. The "Popular" part is KING ENGINE BEARINGS MB5259AM.

The High Performance section: 1 option from KING ENGINE BEARINGS. KING ENGINE BEARINGS MB5259XPC is listed in this group.

Standard Replacement: 4 parts, from TOPLINE, KING ENGINE BEARINGS and ENGINETECH. A representative part number is KING ENGINE BEARINGS MB5259AM.

9 further parts sit outside the graded sections, with the same engine-level match.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

7 Crankshaft Repair Sleeve parts for the 2011 Honda Civic come from 6 brands — SCHAEFFLER, BCA, NATIONAL and 3 other brands. The "Popular" part is BCA NS99315. 3 parts fit every engine; the other 4 are engine-specific.

Part numbers include BCA NS99315, NATIONAL 99315 and SCHAEFFLER SR3549, among others listed above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

36 Crankshaft Seal parts for the 2011 Honda Civic come from 13 brands — ELRING, VICTOR REINZ, FEL-PRO and 10 other brands. The "Popular" part is FEL-PRO BS40535. A list this long means Crankshaft Seal applications vary by configuration — the notes carry the qualifiers.

This table covers the bolts that clamp the cylinder head to the block. Read more

20 Cylinder Head Bolt parts are listed for the 2011 Honda Civic, from APEX, FEL-PRO, MAHLE / CLEVITE and 6 other brands. APEX AHB149 carries the "Popular" badge.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

23 Cylinder Head Gasket parts are listed for the 2011 Honda Civic, from ELRING, APEX, FEL-PRO and 5 other brands. APEX AHG160 carries the "Popular" badge.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

26 Cylinder Head Gasket Set parts are listed for the 2011 Honda Civic, from ENGINETECH, FEL-PRO, APEX and 6 other brands. ENGINETECH HO13HSB carries the "Popular" badge. The notes list position, dimensions and spec qualifiers wherever the manufacturer distinguishes between variants.

This table covers the Cylinder Head plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

This group shows a single part: MAHLE / CLEVITE B32774.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

2 Engine Block Heater parts for the 2011 Honda Civic come from KAT'S HEATERS.

This group includes KAT'S HEATERS 11419 and KAT'S HEATERS 28500.

This table covers the Engine covers. Read more

One part is listed for the 2011 Honda Civic — TECHPRO HO1228135.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

9 Engine Kit Gasket Set parts are listed for the 2011 Honda Civic, from AJUSA, ENGINETECH, TOPLINE and 1 other brand.

This group includes AJUSA 50440500, AJUSA 50275400 and AJUSA 50546700 and the remaining parts above.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

8 Exhaust Valve parts for the 2011 Honda Civic come from 5 brands — TOPLINE, QUALCAST, MELLING and 2 other brands. The "Popular" part is MELLING V5525.

This group includes MELLING V5525, ENGINETECH EM2759 and QUALCAST 1010525 and the remaining parts above.

This table covers the Expansion plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

QUALCAST supplies both parts for the 2011 Honda Civic.

Part numbers include QUALCAST 97110B and QUALCAST 97110.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

7 Harmonic Balancer parts are listed for the 2011 Honda Civic, from DAYCO, PIONEER, SKP and 2 other brands. ULTRA-POWER 594340 carries the "Popular" badge.

In the Economy grade, SKP supplies 1 part: the catalog's value-priced group. A representative part number is SKP SK594340.

The Standard Replacement section: 4 options from ULTRA-POWER, ATP, DAYCO and 1 other brand. ULTRA-POWER 594340 is listed in this group.

2 ungrouped parts are not assigned to a grade, with the same engine-level match.

Part numbers include ULTRA-POWER 594340, SKP SK594340 and ATP 102323, among others listed above.

This table covers the Intake & Exhaust Manifold gasket sets. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

One part is listed for the 2011 Honda Civic — ELRING 884180.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

20 Intake Manifold Gasket parts are listed for the 2011 Honda Civic, from APEX, FEL-PRO, ELRING and 5 other brands. APEX AMS1600 carries the "Popular" badge.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

10 Intake Plenum Gasket parts for the 2011 Honda Civic come from 7 brands — FEL-PRO, AJUSA, APEX and 4 other brands. The "Popular" part is FEL-PRO MS97041.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

5 Intake Valve parts for the 2011 Honda Civic come from 3 brands — TOPLINE, ENGINETECH and QUALCAST.

Listed part numbers: ENGINETECH IM4426, QUALCAST 1003031 and TOPLINE IVH42HY, plus the other parts above.