2011 Honda Civic Ignition Parts

This table covers the sensors that report camshaft position to the ECU. Typical signs include a stall, a no-start, or a code for cam or crank correlation. Check the connector and the reluctor gap before replacing the sensor. Read more

45 Camshaft Position Sensor parts are listed for the 2011 Honda Civic, from STANDARD MOTOR PRODUCTS, WALKER PRODUCTS, ASTEMO / HITACHI and 13 other brands. SKP SK907818 carries the "Popular" badge. Grades run from Economy through Standard Replacement; Standard Replacement is the most populated section, led by ASTEMO / HITACHI, STANDARD MOTOR PRODUCTS, WALKER PRODUCTS and 7 other brands.

This table covers the seals at the Camshaft Position Sensor. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: MAHLE / CLEVITE 76757.

This table covers the sensors that report crankshaft position and engine speed. Typical signs include a stall, a no-start, or a code for cam or crank correlation. Check the connector and the reluctor gap before replacing the sensor. Read more

32 Crankshaft Position Sensor parts are listed for the 2011 Honda Civic, from STANDARD MOTOR PRODUCTS, HOLSTEIN, PRENCO and 16 other brands. SPECTRA PREMIUM S10228 carries the "Popular" badge. Grades run from Economy through Standard Replacement; Economy is the most populated section, led by HOLSTEIN, PRENCO, SKP and 8 other brands.

This table covers the seals at the Crankshaft Position Sensor. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Crankshaft Position Sensor Seal parts for the 2011 Honda Civic come from FEL-PRO. 1 part fits every engine; the other 1 is engine-specific.

This group includes FEL-PRO 72377 and FEL-PRO 72301.

This table covers the coils that fire each spark plug. Typical signs include a misfire that follows one cylinder, a snap in damp weather, or a coil that is swollen or cracked. Swap a suspect coil with a neighbor to confirm, then replace boots that tore on the way off. Read more

57 Ignition Coil parts are listed for the 2011 Honda Civic, from STANDARD MOTOR PRODUCTS, WALKER PRODUCTS, ASTEMO / HITACHI and 16 other brands. SKP SKIC016 carries the "Popular" badge. Economy, Full Service Kit, Premium and Standard Replacement are all represented, and Standard Replacement alone accounts for 27 parts.

This table covers the lock cylinders in the ignition switch. Read more

4 Ignition Lock Cylinder parts are listed for the 2011 Honda Civic, from STANDARD MOTOR PRODUCTS and WELLS.

Listed part numbers: STANDARD MOTOR PRODUCTS US1099, STANDARD MOTOR PRODUCTS US1103 and WELLS 4H1506, plus the other parts above.

This table covers the spark plugs for this engine. Typical signs include misfire under load, rough idle, or a flashing check-engine light. Verify the gap even on pre-gapped plugs, and replace coil boots that come off a high-mileage engine. Read more

57 Spark Plug parts for the 2011 Honda Civic come from 8 brands — DENSO, NGK, CHAMPION and 5 other brands. The "Popular" part is AUTOLITE 5224. They are grouped as Copper / Nickel, Double Platinum (lasts up to 3x longer than Copper / Nickel), Iridium (lasts up to 4x longer than Copper / Nickel), Platinum (lasts up to 2x longer than Copper / Nickel) and Ruthenium (maximum durability & ignitability), with Iridium (lasts up to 4x longer than Copper / Nickel) the largest group at 26 parts from DENSO, NGK, CHAMPION and 3 other brands.

This table covers the silicone and rubber boots that insulate the coil-to-plug spark path. Typical signs include a misfire in the rain, carbon tracking on the boot, or a snap when you pop the coil off. Replace boots as a set on a high-mileage engine; one cracked boot will take the coil with it. Read more

10 Spark Plug / Ignition Coil Boot parts are listed for the 2011 Honda Civic, from STANDARD MOTOR PRODUCTS, ACDELCO, BECK/ARNLEY and 2 other brands. STANDARD MOTOR PRODUCTS SPP154E carries the "Popular" badge.

In the Economy grade, STANDARD MOTOR PRODUCTS supplies 3 parts: the catalog's value-priced group. A representative part number is STANDARD MOTOR PRODUCTS 19801.

The Standard Replacement section lists 6 options from STANDARD MOTOR PRODUCTS, ACDELCO, BECK/ARNLEY and 1 other brand — built to original-equipment specification. STANDARD MOTOR PRODUCTS SPP154E is listed in this group.

1 ungrouped part is not assigned to a grade, with the same engine-level match.

This table covers the seals at the Spark Plug Tube. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Spark Plug Tube Seal parts are listed for the 2011 Honda Civic, from BECK/ARNLEY, FEL-PRO, MAHLE / CLEVITE and 1 other brand. FEL-PRO ES72967 carries the "Popular" badge.

Part numbers include FEL-PRO ES72967, BECK/ARNLEY 0396583 and BECK/ARNLEY 0396582, among others listed above.