2014 Honda Fit Engine Parts

This table covers the Camshaft caps. Typical signs include a leak at the neck, a cap that will not hold pressure, or a missing tether. Match the pressure rating or thread in the notes — radiator, reservoir and fuel caps are not interchangeable. Read more

One part is listed for the 2014 Honda Fit — AJUSA 00794900.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Camshaft Seal parts for the 2014 Honda Fit come from 3 brands — FEL-PRO, JAPANESE OE and VICTOR REINZ.

Part numbers include FEL-PRO TCS46212, JAPANESE OE A6622 and VICTOR REINZ 815327200.

This table covers the Circular / Semi-Circular plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

This group shows a single part: VICTOR REINZ 711552200.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

2 Conversion / Lower Gasket Set parts are listed for the 2014 Honda Fit, from AJUSA and FEL-PRO.

Listed part numbers: AJUSA 54253100 and FEL-PRO CS26529.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

3 Crankshaft Repair Sleeve parts for the 2014 Honda Fit come from 3 brands — BCA, NATIONAL and WJB / INMOTION PARTS.

Listed part numbers: BCA NS99315, NATIONAL 99315 and WJB / INMOTION PARTS WS99315.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

9 Crankshaft Seal parts for the 2014 Honda Fit come from 8 brands — SCHAEFFLER, SKF, VICTOR REINZ and 5 other brands. The "Popular" part is SKF 31507.

This group includes SKF 31507, VICTOR REINZ 815333800 and ACDELCO 228008 and the remaining parts above.

This table covers the bolts that clamp the cylinder head to the block. Read more

3 Cylinder Head Bolt parts are listed for the 2014 Honda Fit, from AJUSA, FEL-PRO and VICTOR REINZ.

This group includes AJUSA 81034300, FEL-PRO ES72449 and VICTOR REINZ 143233501.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Cylinder Head Gasket parts are listed for the 2014 Honda Fit, from AJUSA, FEL-PRO, MAHLE / CLEVITE and 1 other brand.

Listed part numbers: AJUSA 10193300, FEL-PRO 26529PT and MAHLE / CLEVITE 54815, plus the other parts above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

5 Cylinder Head Gasket Set parts are listed for the 2014 Honda Fit, from FEL-PRO, AJUSA, MAHLE / CLEVITE and 1 other brand. FEL-PRO HS26529PT2 carries the "Popular" badge.

Part numbers include FEL-PRO HS26529PT2, AJUSA 52488900 and FEL-PRO HS26529PT2VK, among others listed above.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

2 Engine Block Heater parts for the 2014 Honda Fit come from KAT'S HEATERS.

Listed part numbers: KAT'S HEATERS 11419 and KAT'S HEATERS 28500.

This table covers the Engine covers. Read more

TECHPRO supplies both parts for the 2014 Honda Fit. 1 part fits every engine; the other 1 is engine-specific.

Listed part numbers: TECHPRO HO1228125 and TECHPRO HO1228139.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

One part is listed for the 2014 Honda Fit — AJUSA 50440600.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

One part is listed for the 2014 Honda Fit — DAYCO PB1714N.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Intake Manifold Gasket parts are listed for the 2014 Honda Fit, from AJUSA, FEL-PRO, MAHLE / CLEVITE and 1 other brand. FEL-PRO MS97174 carries the "Popular" badge.

This group includes FEL-PRO MS97174, AJUSA 13278700 and AJUSA 13278800 and the remaining parts above.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Intake Plenum Gasket parts for the 2014 Honda Fit come from 2 brands — FEL-PRO and VICTOR REINZ.

Listed part numbers: FEL-PRO MS97178 and VICTOR REINZ 115414901.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

7 Motor Mount parts for the 2014 Honda Fit come from 4 brands — DEA / MARMON RIDE CONTROL, ANCHOR, PIONEER and 1 other brand. The "Popular" part is DEA / MARMON RIDE CONTROL AM501.

Listed part numbers: DEA / MARMON RIDE CONTROL AM501, DEA / MARMON RIDE CONTROL A65001HY and ANCHOR 9945, plus the other parts above.

This table covers the Motor Mount kits. Read more

2 Motor Mount Kit parts for the 2014 Honda Fit come from ANCHOR.

This group includes ANCHOR 300461 and ANCHOR 300458.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

16 Oil parts for the 2014 Honda Fit come from 3 brands — MOBIL, VALVOLINE and PENTOSIN. The "Popular" part is MOBIL 124184.

The Full Synthetic section lists 9 options from PENTOSIN, MOBIL and VALVOLINE — full-synthetic oils. MOBIL 124184 is listed in this group.

In the High Mileage (>75,000 Miles) grade, VALVOLINE and MOBIL supply 7 parts: oils grouped for high-mileage engines. A representative part number is MOBIL 125203.

This table covers the Oil Cooler Mounting kits. Read more

HAYDEN supplies both parts for the 2014 Honda Fit.

Listed part numbers: HAYDEN 238 and HAYDEN 153.

This table covers the Oil Dipstick tubes. Read more

This group shows a single part: DORMAN 921097.

This table covers the drain plugs in the oil pan. Read more

6 Oil Drain Plug parts for the 2014 Honda Fit come from 4 brands — DORMAN, AGS, REIN and 1 other brand. The "Popular" part is DORMAN 090033.

This group includes DORMAN 090033, DORMAN 090053 and AGS ODP00007 and the remaining parts above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Oil Drain Plug Gasket parts are listed for the 2014 Honda Fit, from AJUSA, DORMAN and FEL-PRO.

This group includes AJUSA 22007400, DORMAN 095144 and FEL-PRO 73346.

This table covers the caps on the oil filler neck. Read more

2 Oil Filler Cap parts for the 2014 Honda Fit come from 2 brands — GATES and MOTORAD.

Listed part numbers: GATES 31284 and MOTORAD MO159.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

13 Oil Filter parts for the 2014 Honda Fit come from 10 brands — BOSCH, VARIOUS MFR, WIX and 7 other brands. The "Popular" part is WIX 57356XP.

The Economy section lists 4 options from BOSCH, FVP, PRO-TEC and 1 other brand — the catalog's value-priced group. BOSCH 72226WS is listed in this group.

The High Performance / Heavy Duty section lists 2 options from WIX and MOBIL — grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. WIX 57356XP is listed in this group.

In the Standard Replacement grade, BOSCH, WIX, HENGST and 4 other brands supply 7 parts: built to original-equipment specification. A representative part number is BOSCH 3323.

This table covers the Oil Filter Support tubes. Read more

One part is listed for the 2014 Honda Fit — AUTOTECNICA HA1416938.

This table covers the oil pans that hold the engine's oil sump. Read more

5 Oil Pan parts are listed for the 2014 Honda Fit, from SKP, SPECTRA PREMIUM and DORMAN. SKP SK264456 carries the "Popular" badge.

Part numbers include SKP SK264456, DORMAN 264456 and SKP SK264166, among others listed above.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Oil Pan Gasket parts for the 2014 Honda Fit come from 4 brands — AJUSA, FEL-PRO, ELRING and 1 other brand. The "Popular" part is FEL-PRO OS30837R.

This group includes FEL-PRO OS30837R, AJUSA 14090600 and AJUSA 59020300 and the remaining parts above.

This table covers the seals at the Oil Pressure Sender / Switch. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: FEL-PRO 73196.

This table covers the wear sleeves used to restore a Oil Pump seal surface. Read more

3 Oil Pump Repair Sleeve parts are listed for the 2014 Honda Fit, from BCA, NATIONAL and WJB / INMOTION PARTS.

Listed part numbers: BCA NS99157, NATIONAL 99157 and WJB / INMOTION PARTS WS99157.

This table covers the seals at the Oil Pump. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Oil Pump Seal parts are listed for the 2014 Honda Fit, from NATIONAL and WJB / INMOTION PARTS.

Listed part numbers: NATIONAL 711005 and WJB / INMOTION PARTS WS711005.

This table covers the gaskets that seal the Oil Strainer. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2014 Honda Fit — AJUSA 01239000.

This table covers the rings that seal each piston to the cylinder wall. Read more

HASTINGS MANUFACTURING supplies the 3 Piston Ring parts for the 2014 Honda Fit.

Listed part numbers: HASTINGS MANUFACTURING 2C5253S, HASTINGS MANUFACTURING 2C5253 and HASTINGS MANUFACTURING 2C5394.

This table covers kits that group a timing chain with the related tensioners and guides. Read more

This group shows a single part: INA ZC90731S.

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: SCHAEFFLER SS5126.

This table covers the Torque Strut mounts. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

5 Torque Strut Mount parts are listed for the 2014 Honda Fit, from DEA / MARMON RIDE CONTROL, ANCHOR, PIONEER and 1 other brand. ANCHOR 9863 carries the "Popular" badge.

Part numbers include ANCHOR 9863, DEA / MARMON RIDE CONTROL A4574 and DEA / MARMON RIDE CONTROL A4563, among others listed above.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Valve Cover Gasket parts for the 2014 Honda Fit come from 4 brands — BECK/ARNLEY, FEL-PRO, MAHLE / CLEVITE and 1 other brand.

Part numbers include BECK/ARNLEY 0361976, FEL-PRO VS50785R and MAHLE / CLEVITE VS50608, among others listed above.

This table covers the pressed-in bronze and cast-iron guides that align valve stems. Typical signs include oil smoke on startup, a guide that has gone oval, or a valve that no longer seats quietly. Guides are a machine-shop fit. Confirm stem diameter in the notes before ordering. Read more

2 Valve Guide parts for the 2014 Honda Fit come from SBI.

Part numbers include SBI 1408158 and SBI 1408157.

This table covers the Valve Spring retainers. Read more

One part is listed for the 2014 Honda Fit — MELLING VSR729.

This table covers the keepers that lock each valve-spring retainer to the stem. Read more

One part is listed for the 2014 Honda Fit — SBI 1211060.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Valve Stem Seal parts for the 2014 Honda Fit come from 4 brands — SBI, FEL-PRO, AJUSA and 1 other brand. The "Popular" part is FEL-PRO SS702831.

Listed part numbers: FEL-PRO SS702831, AJUSA 57030200 and SBI 1221202, plus the other parts above.

This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

This group shows a single part: GATES VVS323.

This table covers the Variable Valve Timing (VVT) Solenoid filters. Typical signs include restricted flow — long cranking, weak airflow, or dirty fluid after a short interval. Seat the new filter so it cannot bypass, and use the grade the notes call for. Read more

3 Variable Valve Timing (VVT) Solenoid Filter parts for the 2014 Honda Fit come from 3 brands — BECK/ARNLEY, FEL-PRO and GATES.

Listed part numbers: BECK/ARNLEY 0396631, FEL-PRO ES73072 and GATES VVS909.