2018 Honda Fit Engine Parts

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

One part is listed for the 2018 Honda Fit — TOPLINE RBH42.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

2 Crankshaft Main Bearing parts for the 2018 Honda Fit come from TOPLINE.

This group includes TOPLINE MBH54T and TOPLINE TWH54T.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

3 Crankshaft Repair Sleeve parts for the 2018 Honda Fit come from 3 brands — BCA, NATIONAL and WJB / INMOTION PARTS.

Listed part numbers: BCA NS99315, NATIONAL 99315 and WJB / INMOTION PARTS WS99315.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Crankshaft Seal parts for the 2018 Honda Fit come from 5 brands — ACDELCO, BCA, MAHLE / CLEVITE and 2 other brands. The "Popular" part is ACDELCO 228008.

Part numbers include ACDELCO 228008, BCA NS228008 and MAHLE / CLEVITE 68080, among others listed above.

This table covers the bolts that clamp the cylinder head to the block. Read more

4 Cylinder Head Bolt parts are listed for the 2018 Honda Fit, from APEX, FEL-PRO, MAHLE / CLEVITE and 1 other brand.

Part numbers include APEX AHB164, FEL-PRO ES72449 and MAHLE / CLEVITE GS33708, among others listed above.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Cylinder Head Gasket parts are listed for the 2018 Honda Fit, from APEX, ELRING, FEL-PRO and 1 other brand.

This group includes APEX AHG179, ELRING 165220 and FEL-PRO 26786PT and the remaining parts above.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

2 Engine Block Heater parts for the 2018 Honda Fit come from KAT'S HEATERS.

Part numbers include KAT'S HEATERS 11419 and KAT'S HEATERS 28500.

This table covers the Engine covers. Read more

4 Engine Cover parts are listed for the 2018 Honda Fit, from TECHPRO and VARIOUS MFR.

This group includes TECHPRO HO1228147 and TECHPRO HO1228148 and the remaining parts above.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

2 Exhaust Valve parts for the 2018 Honda Fit come from 2 brands — QUALCAST and TOPLINE.

This group includes QUALCAST 1030539 and TOPLINE EVH42F.

This table covers the followers that drive a mechanical fuel pump off the camshaft. Read more

2 Fuel Pump Camshaft Follower parts are listed for the 2018 Honda Fit, from STANDARD MOTOR PRODUCTS and WELLS.

Listed part numbers: STANDARD MOTOR PRODUCTS GDF101 and WELLS 5T5001.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Intake Manifold Gasket parts are listed for the 2018 Honda Fit, from APEX, ELRING, FEL-PRO and 1 other brand.

This group includes APEX AMS1790, ELRING 165260 and FEL-PRO MS97618 and the remaining parts above.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

2 Intake Valve parts for the 2018 Honda Fit come from 2 brands — QUALCAST and TOPLINE.

Listed part numbers: QUALCAST 1030540 and TOPLINE IVH42F.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

8 Motor Mount parts for the 2018 Honda Fit come from 4 brands — PIONEER, DEA / MARMON RIDE CONTROL, ANCHOR and 1 other brand. The "Popular" part is DEA / MARMON RIDE CONTROL A65095.

Listed part numbers: DEA / MARMON RIDE CONTROL A65095, DEA / MARMON RIDE CONTROL A65064 and ANCHOR 9945, plus the other parts above.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

46 Oil parts for the 2018 Honda Fit come from 6 brands — LIQUI MOLY, VALVOLINE, MOBIL and 3 other brands. The "Popular" part is LIQUI MOLY 22044. Full Synthetic and High Mileage (>75,000 Miles) are all represented, and Full Synthetic alone accounts for 38 parts.

This table covers the drain plugs in the oil pan. Read more

5 Oil Drain Plug parts for the 2018 Honda Fit come from 3 brands — DORMAN, REIN and SKP. The "Popular" part is DORMAN 090053.

Listed part numbers: DORMAN 090053, DORMAN 090033 and DORMAN 092020, plus the other parts above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Oil Drain Plug Gasket parts are listed for the 2018 Honda Fit, from ULTRA-POWER, DORMAN, APEX and 1 other brand. DORMAN 095144 carries the "Popular" badge.

Listed part numbers: DORMAN 095144, APEX ADP1909 and FEL-PRO 73346, plus the other parts above.

This table covers the caps on the oil filler neck. Read more

4 Oil Filler Cap parts for the 2018 Honda Fit come from 4 brands — CALORSTAT, DORMAN, GATES and 1 other brand.

This group includes CALORSTAT OC2335, DORMAN 80985 and GATES 31284 and the remaining parts above.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

18 Oil Filter parts for the 2018 Honda Fit come from 15 brands — BOSCH, VARIOUS MFR, WIX and 12 other brands. The "Popular" part is WIX 57356XP.

The Economy section lists 6 options from BOSCH, FRAM, FVP and 3 other brands — the catalog's value-priced group. BOSCH 72226WS is listed in this group.

The High Performance / Heavy Duty section lists 2 options from WIX and MOBIL — grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. WIX 57356XP is listed in this group.

In the Standard Replacement grade, BOSCH, DENSO, WIX and 7 other brands supply 10 parts: built to original-equipment specification. A representative part number is BOSCH 3323.

This table covers the Oil Filter Support tubes. Read more

One part is listed for the 2018 Honda Fit — AUTOTECNICA HA1416938.

This table covers the oil pans that hold the engine's oil sump. Read more

4 Oil Pan parts are listed for the 2018 Honda Fit, from ACKOJA, DORMAN, SKP and 1 other brand.

Part numbers include ACKOJA A260260, DORMAN 264857 and SKP SK264857, among others listed above.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Oil Pan Gasket parts for the 2018 Honda Fit come from 2 brands — MAHLE / CLEVITE and VICTOR REINZ.

This group includes MAHLE / CLEVITE OS32396 and VICTOR REINZ 703141410.

This table covers the seals at the Oil Pressure Sender / Switch. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: FEL-PRO 73196.

This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

2 Oil Pump parts for the 2018 Honda Fit come from 2 brands — MELLING and TOPLINE.

Listed part numbers: MELLING M571 and TOPLINE OPH42L.

This table covers the Oil Pump Chain guides. Read more

One part is listed for the 2018 Honda Fit — S.A. GEAR 71280.

This table covers the wear sleeves used to restore a Oil Pump seal surface. Read more

3 Oil Pump Repair Sleeve parts are listed for the 2018 Honda Fit, from BCA, NATIONAL and WJB / INMOTION PARTS.

Part numbers include BCA NS99157, NATIONAL 99157 and WJB / INMOTION PARTS WS99157.

This table covers the seals at the Oil Pump. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Oil Pump Seal parts are listed for the 2018 Honda Fit, from NATIONAL and WJB / INMOTION PARTS.

Listed part numbers: NATIONAL 711005 and WJB / INMOTION PARTS WS711005.

This table covers the Timing Cam sprockets. Read more

2 Timing Cam Sprocket parts for the 2018 Honda Fit come from 2 brands — CLOYES and S.A. GEAR.

Part numbers include CLOYES S1066 and S.A. GEAR S1493.

This table covers the timing chains that keep the cams in time with the crank. Read more

2 Timing Chain parts are listed for the 2018 Honda Fit, from CLOYES and S.A. GEAR.

Listed part numbers: CLOYES C766 and S.A. GEAR C1196.

This table covers kits that group a timing chain with the related tensioners and guides. Read more

4 Timing Chain & Component Kit parts for the 2018 Honda Fit come from 3 brands — CLOYES, S.A. GEAR and ULTRA-POWER.

The Economy section: 2 options from S.A. GEAR and ULTRA-POWER. S.A. GEAR 76508 is listed in this group.

Standard Replacement: 2 parts, from CLOYES. A representative part number is CLOYES 90766SX.

Listed part numbers: S.A. GEAR 76508 and ULTRA-POWER 90766SX, plus the other parts above.

This table covers the guides and dampers that keep the timing chain on its path. Read more

5 Timing Chain Guide / Damper parts are listed for the 2018 Honda Fit, from CLOYES and S.A. GEAR.

Part numbers include CLOYES 95868, CLOYES 95866 and CLOYES 95867, among others listed above.

This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

2 Timing Chain Tensioner parts for the 2018 Honda Fit come from 2 brands — CLOYES and S.A. GEAR.

This group includes CLOYES 95865 and S.A. GEAR 91376.

This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: MAHLE / CLEVITE T33408.

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: MAHLE / CLEVITE 67932.

This table covers the crankshaft sprockets that drive the timing chain or belt. Read more

2 Timing Crank Sprocket parts for the 2018 Honda Fit come from 2 brands — CLOYES and S.A. GEAR.

Part numbers include CLOYES S1067 and S.A. GEAR S1494.

This table covers the Torque Strut mounts. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

5 Torque Strut Mount parts are listed for the 2018 Honda Fit, from WESTAR, ANCHOR, DEA / MARMON RIDE CONTROL and 1 other brand. ANCHOR 9863 carries the "Popular" badge.

Listed part numbers: ANCHOR 9863, DEA / MARMON RIDE CONTROL A65063 and PIONEER 639863, plus the other parts above.

This table covers the Valve covers. Read more

One part is listed for the 2018 Honda Fit — ACKOJA A260174.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Valve Cover Gasket parts for the 2018 Honda Fit come from 5 brands — BECK/ARNLEY, APEX, FEL-PRO and 2 other brands. The "Popular" part is BECK/ARNLEY 0362058.

Part numbers include BECK/ARNLEY 0362058, APEX AVC179 and FEL-PRO VS50966R, among others listed above.

This table covers the pressed-in bronze and cast-iron guides that align valve stems. Typical signs include oil smoke on startup, a guide that has gone oval, or a valve that no longer seats quietly. Guides are a machine-shop fit. Confirm stem diameter in the notes before ordering. Read more

4 Valve Guide parts for the 2018 Honda Fit come from 3 brands — TOPLINE, QUALCAST and SBI.

Listed part numbers: QUALCAST 308158, SBI 1408158 and TOPLINE IVGH21, plus the other parts above.

This table covers the Valve Spring retainers. Read more

One part is listed for the 2018 Honda Fit — MELLING VSR729.

This table covers the keepers that lock each valve-spring retainer to the stem. Read more

3 Valve Spring Retainer Keeper parts are listed for the 2018 Honda Fit, from MELLING, QUALCAST and SBI.

This group includes MELLING VL1060, QUALCAST 345008 and SBI 1211060.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

8 Valve Stem Seal parts for the 2018 Honda Fit come from 6 brands — MAHLE / CLEVITE, SBI, APEX and 3 other brands. The "Popular" part is APEX AVS1003.

Listed part numbers: APEX AVS1003, FEL-PRO SS702831 and MAHLE / CLEVITE SS45627, plus the other parts above.

This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

4 Variable Valve Timing (VVT) Solenoid / Actuator parts for the 2018 Honda Fit come from 2 brands — STANDARD MOTOR PRODUCTS and WELLS.

The Economy section: 1 option from WELLS. WELLS 2T1281 is listed in this group.

Standard Replacement: 3 parts, from STANDARD MOTOR PRODUCTS. A representative part number is STANDARD MOTOR PRODUCTS VVT361.

Part numbers include WELLS 2T1281, STANDARD MOTOR PRODUCTS VVT361 and STANDARD MOTOR PRODUCTS VVT468, among others listed above.

This table covers the cam phaser sprockets used by the variable-valve-timing system. Read more

This group shows a single part: AUTOTECNICA HA1422641.

This table covers the Variable Valve Timing (VVT) Sprocket bolts. Read more

One part is listed for the 2018 Honda Fit — CLOYES VCB132.