2018 Honda CR-V Ignition Parts

This table covers the sensors that report camshaft position to the ECU. Typical signs include a stall, a no-start, or a code for cam or crank correlation. Check the connector and the reluctor gap before replacing the sensor. Read more

19 Camshaft Position Sensor parts for the 2018 Honda CR-V come from 11 brands — HOLSTEIN, VEMO, ASTEMO / HITACHI and 8 other brands. The "Popular" part is ULTRA-POWER PC1084.

The Economy section lists 6 options from HOLSTEIN, VEMO, ULTRA-POWER and 1 other brand — the catalog's value-priced group. ULTRA-POWER PC1084 is listed in this group.

In the Standard Replacement grade, ASTEMO / HITACHI, STANDARD MOTOR PRODUCTS, BECK/ARNLEY and 4 other brands supply 13 parts: built to original-equipment specification. A representative part number is ASTEMO / HITACHI CPS0222.

This table covers the seals at the Camshaft Position Sensor. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2018 Honda CR-V — MAHLE / CLEVITE 76757.

This table covers the sensors that report crankshaft position and engine speed. Typical signs include a stall, a no-start, or a code for cam or crank correlation. Check the connector and the reluctor gap before replacing the sensor. Read more

20 Crankshaft Position Sensor parts for the 2018 Honda CR-V come from 13 brands — HOLSTEIN, ASTEMO / HITACHI, DELPHI and 10 other brands. The "Popular" part is ASTEMO / HITACHI CPS0223.

The Economy section: 6 options from HOLSTEIN, PRENCO, SPECTRA PREMIUM and 2 other brands. HOLSTEIN 2CRK0736 is listed in this group.

Standard Replacement: 14 parts, from ASTEMO / HITACHI, DELPHI, STANDARD MOTOR PRODUCTS and 5 other brands. A representative part number is ASTEMO / HITACHI CPS0223.

This table covers the seals at the Crankshaft Position Sensor. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

FEL-PRO supplies both parts for the 2018 Honda CR-V. All of them fit every engine offered in the 2018 CR-V.

This group includes FEL-PRO 72377 and FEL-PRO 72301.

This table covers the coils that fire each spark plug. Typical signs include a misfire that follows one cylinder, a snap in damp weather, or a coil that is swollen or cracked. Swap a suspect coil with a neighbor to confirm, then replace boots that tore on the way off. Read more

26 Ignition Coil parts for the 2018 Honda CR-V come from 15 brands — HOLSTEIN, SKP, SPECTRA PREMIUM and 12 other brands. The "Popular" part is ASTEMO / HITACHI IGC0095. Economy, Premium and Standard Replacement are all represented, and Standard Replacement alone accounts for 13 parts.

This table covers the spark plugs for this engine. Typical signs include misfire under load, rough idle, or a flashing check-engine light. Verify the gap even on pre-gapped plugs, and replace coil boots that come off a high-mileage engine. Read more

14 Spark Plug parts are listed for the 2018 Honda CR-V, from NGK, BOSCH, AUTOLITE and 3 other brands. NGK 95660 carries the "Popular" badge.

The Iridium (lasts up to 4x longer than Copper / Nickel) section lists 11 options from NGK, BOSCH, AUTOLITE and 3 other brands — grouped under the catalog's "Iridium (lasts up to 4x longer than Copper / Nickel)" designation — the notes column spells out what sets them apart. NGK 95660 is listed in this group.

In the Platinum (lasts up to 2x longer than Copper / Nickel) grade, NGK supplies 1 part: grouped under the catalog's "Platinum (lasts up to 2x longer than Copper / Nickel)" designation — the notes column spells out what sets them apart. A representative part number is NGK 92649.

In the Ruthenium (maximum durability & ignitability) grade, NGK supplies 2 parts: grouped under the catalog's "Ruthenium (maximum durability & ignitability)" designation — the notes column spells out what sets them apart. A representative part number is NGK 91784.

This table covers the silicone and rubber boots that insulate the coil-to-plug spark path. Typical signs include a misfire in the rain, carbon tracking on the boot, or a snap when you pop the coil off. Replace boots as a set on a high-mileage engine; one cracked boot will take the coil with it. Read more

4 Spark Plug / Ignition Coil Boot parts for the 2018 Honda CR-V come from 2 brands — STANDARD MOTOR PRODUCTS and WALKER PRODUCTS.

The Economy section: 2 options from STANDARD MOTOR PRODUCTS and WALKER PRODUCTS. STANDARD MOTOR PRODUCTS 19881 is listed in this group.

Standard Replacement: 1 part, from STANDARD MOTOR PRODUCTS. A representative part number is STANDARD MOTOR PRODUCTS SPP196E.

1 further part sits outside the graded sections, with the same engine-level match.

Listed part numbers: STANDARD MOTOR PRODUCTS 19881, WALKER PRODUCTS 900P2157 and STANDARD MOTOR PRODUCTS SPP196E, plus the other parts above.

This table covers the seals at the Spark Plug Tube. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: MAHLE / CLEVITE GS33914.