2018 Honda CR-V Engine Parts

This table covers the chains that drive the balance shafts. Read more

2 Balance Shaft Chain parts for the 2018 Honda CR-V come from S.A. GEAR.

This group includes S.A. GEAR C1149 and S.A. GEAR 76385P.

This table covers the Balance Shaft Chain tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

2 Balance Shaft Chain Tensioner parts are listed for the 2018 Honda CR-V, from CLOYES and S.A. GEAR.

Listed part numbers: CLOYES 95989 and S.A. GEAR 91291.

This table covers the Balance Shaft sprockets. Read more

2 Balance Shaft Sprocket parts for the 2018 Honda CR-V come from 2 brands — CLOYES and S.A. GEAR.

Listed part numbers: CLOYES S1116 and S.A. GEAR S1431.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

11 Connecting Rod Bearing parts for the 2018 Honda CR-V come from 3 brands — KING ENGINE BEARINGS, ENGINETECH and TOPLINE. The "Popular" part is KING ENGINE BEARINGS CR4542XPC.

The High Performance section lists 6 options from KING ENGINE BEARINGS — engineered beyond original-equipment specification. KING ENGINE BEARINGS CR4542XPC is listed in this group.

In the Standard Replacement grade, KING ENGINE BEARINGS, ENGINETECH and TOPLINE supply 3 parts: built to original-equipment specification. A representative part number is KING ENGINE BEARINGS CR4542SM.

2 further parts sit outside the graded sections, with the same engine-level match.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

9 Conversion / Lower Gasket Set parts for the 2018 Honda CR-V come from 7 brands — AJUSA, TOPLINE, APEX and 4 other brands. The "Popular" part is APEX ACS1050.

Listed part numbers: APEX ACS1050, FEL-PRO CS26399 and AJUSA 54280700, plus the other parts above.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

11 Crankshaft Main Bearing parts are listed for the 2018 Honda CR-V, from KING ENGINE BEARINGS, TOPLINE and ENGINETECH. KING ENGINE BEARINGS MB5259XPC carries the "Popular" badge.

High Performance: 4 parts, from KING ENGINE BEARINGS. A representative part number is KING ENGINE BEARINGS MB5259XPC.

The Standard Replacement section: 4 options from TOPLINE, KING ENGINE BEARINGS and ENGINETECH. KING ENGINE BEARINGS MB5259AM is listed in this group.

3 ungrouped parts are not assigned to a grade, with the same engine-level match.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

6 Crankshaft Repair Sleeve parts are listed for the 2018 Honda CR-V, from BCA, NATIONAL and WJB / INMOTION PARTS. BCA NS99315 carries the "Popular" badge.

This group includes BCA NS99315, NATIONAL 99157 and BCA NS99157 and the remaining parts above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

18 Crankshaft Seal parts are listed for the 2018 Honda CR-V, from FEL-PRO, ELRING, APEX and 8 other brands. APEX ATC1490 carries the "Popular" badge. 3 parts fit every engine; the other 15 are engine-specific.

This table covers the bolts that clamp the cylinder head to the block. Read more

10 Cylinder Head Bolt parts for the 2018 Honda CR-V come from 7 brands — AJUSA, FEL-PRO, TOPLINE and 4 other brands. The "Popular" part is ENGINETECH HB261.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

12 Cylinder Head Gasket parts for the 2018 Honda CR-V come from 7 brands — APEX, FEL-PRO, AJUSA and 4 other brands. The "Popular" part is APEX AHG174.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

10 Cylinder Head Gasket Set parts for the 2018 Honda CR-V come from 7 brands — TOPLINE, MAHLE / CLEVITE, APEX and 4 other brands. The "Popular" part is APEX AHS1074.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

KAT'S HEATERS supplies both parts for the 2018 Honda CR-V. All of them fit every engine offered in the 2018 CR-V.

Part numbers include KAT'S HEATERS 11419 and KAT'S HEATERS 28500.

This table covers the Engine covers. Read more

6 Engine Cover parts for the 2018 Honda CR-V come from 2 brands — TECHPRO and VARIOUS MFR. The "Popular" part is TECHPRO HO1228150. Every part fits both the 1.5L L4 Turbocharged and the 2.4L L4.

Part numbers include TECHPRO HO1228150, TECHPRO HO1228157 and TECHPRO HO1228156, among others listed above.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

4 Engine Kit Gasket Set parts for the 2018 Honda CR-V come from 2 brands — AJUSA and TOPLINE.

Listed part numbers: AJUSA 50477900, AJUSA 50582000 and TOPLINE CGSH54TA, plus the other parts above.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

6 Exhaust Valve parts are listed for the 2018 Honda CR-V, from ENGINETECH, TOPLINE, MELLING and 1 other brand.

This group includes ENGINETECH EM1021, ENGINETECH EM1017 and MELLING V5839 and the remaining parts above.

This table covers the followers that drive a mechanical fuel pump off the camshaft. Read more

2 Fuel Pump Camshaft Follower parts for the 2018 Honda CR-V come from 2 brands — STANDARD MOTOR PRODUCTS and WELLS. Every part fits both the 1.5L L4 Turbocharged and the 2.4L L4.

This group includes STANDARD MOTOR PRODUCTS GDF101 and WELLS 5T5001.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

5 Harmonic Balancer parts for the 2018 Honda CR-V come from 4 brands — ATP, ACKOJA, DORMAN and 1 other brand.

Listed part numbers: ACKOJA A260411, ATP 102139 and ATP 102488, plus the other parts above.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

10 Intake Manifold Gasket parts for the 2018 Honda CR-V come from 5 brands — ELRING, FEL-PRO, MAHLE / CLEVITE and 2 other brands. The "Popular" part is FEL-PRO MS97595.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

6 Intake Valve parts are listed for the 2018 Honda CR-V, from ENGINETECH, TOPLINE, MELLING and 1 other brand.

Part numbers include ENGINETECH IM1022, ENGINETECH IM1018 and MELLING V5840, among others listed above.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

6 Motor Mount parts are listed for the 2018 Honda CR-V, from DEA / MARMON RIDE CONTROL, ANCHOR, BECK/ARNLEY and 2 other brands. DEA / MARMON RIDE CONTROL A65114 carries the "Popular" badge. 3 parts fit every engine; the other 3 are engine-specific.

Part numbers include DEA / MARMON RIDE CONTROL A65114, ANCHOR 10093 and BECK/ARNLEY 1042461, among others listed above.

This table covers the Motor Mount kits. Read more

One part is listed for the 2018 Honda CR-V — ANCHOR 300256.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

37 Oil parts are listed for the 2018 Honda CR-V, from LIQUI MOLY, VALVOLINE, MOBIL and 3 other brands. LIQUI MOLY 22044 carries the "Popular" badge. They are grouped as Full Synthetic and High Mileage (>75,000 Miles), with Full Synthetic the largest group at 30 parts from LIQUI MOLY, VALVOLINE, MOBIL and 3 other brands.

This table covers the Oil Dipstick tubes. Read more

2 Oil Dipstick / Tube parts are listed for the 2018 Honda CR-V, from AUTOTECNICA and DORMAN.

This group includes AUTOTECNICA HA1423352 and DORMAN 921072.

This table covers the drain plugs in the oil pan. Read more

7 Oil Drain Plug parts are listed for the 2018 Honda CR-V, from DORMAN, ELRING, REIN and 1 other brand. DORMAN 090053 carries the "Popular" badge. 5 parts fit every engine; the other 2 are engine-specific.

Part numbers include DORMAN 090053, DORMAN 090033 and DORMAN 092020, among others listed above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Oil Drain Plug Gasket parts for the 2018 Honda CR-V come from 6 brands — DORMAN, FEL-PRO, AJUSA and 3 other brands. The "Popular" part is DORMAN 095144. 5 parts fit every engine; the other 1 is engine-specific.

Listed part numbers: DORMAN 095144, FEL-PRO 73346 and AJUSA 22007400, plus the other parts above.

This table covers the caps on the oil filler neck. Read more

4 Oil Filler Cap parts are listed for the 2018 Honda CR-V, from CALORSTAT, DORMAN, GATES and 1 other brand. All of them fit every engine offered in the 2018 CR-V.

Part numbers include CALORSTAT OC2335, DORMAN 80985 and GATES 31284, among others listed above.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

19 Oil Filter parts are listed for the 2018 Honda CR-V, from BOSCH, VARIOUS MFR, WIX and 13 other brands. MOBIL M1110A carries the "Popular" badge. 16 parts fit every engine; the other 3 are engine-specific.

In the Economy grade, BOSCH, FRAM, FVP and 3 other brands supply 6 parts: the catalog's value-priced group. A representative part number is BOSCH 72226WS.

In the High Performance / Heavy Duty grade, MOBIL and WIX supply 2 parts: grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. A representative part number is MOBIL M1110A.

The Standard Replacement section: 11 options from BOSCH, DENSO, WIX and 8 other brands. BOSCH 3323 is listed in this group.

This table covers the Oil Filter Adapter Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

2 Oil Filter Adapter Gasket / O-Ring parts for the 2018 Honda CR-V come from 2 brands — FEL-PRO and MAHLE / CLEVITE.

Part numbers include FEL-PRO ES72748 and MAHLE / CLEVITE B33713.

This table covers the Oil Filter Support tubes. Read more

This group shows a single part: AUTOTECNICA HA1416938.

This table covers the oil pans that hold the engine's oil sump. Read more

4 Oil Pan parts for the 2018 Honda CR-V come from 4 brands — ACKOJA, DORMAN, SKP and 1 other brand.

Part numbers include ACKOJA A260256, DORMAN 264869 and SKP SKOP423, among others listed above.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2018 Honda CR-V — VICTOR REINZ 703141410.

This table covers the seals at the Oil Pressure Sender / Switch. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2018 Honda CR-V — FEL-PRO 73196.

This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

4 Oil Pump parts are listed for the 2018 Honda CR-V, from TOPLINE, ENGINETECH and MELLING.

This group includes ENGINETECH EP570, MELLING M570 and TOPLINE OPH54T and the remaining parts above.

This table covers the chains that drive the oil pump. Read more

2 Oil Pump Chain parts for the 2018 Honda CR-V come from 2 brands — INA and CLOYES.

The Kit section lists 1 option from INA — grouped under the catalog's "Kit" designation — the notes column spells out what sets them apart. INA ZC0129 is listed in this group.

Standard Replacement: 1 part, from CLOYES. A representative part number is CLOYES C931.

This group includes INA ZC0129 and CLOYES C931.

This table covers the wear sleeves used to restore a Oil Pump seal surface. Read more

3 Oil Pump Repair Sleeve parts for the 2018 Honda CR-V come from 3 brands — BCA, NATIONAL and WJB / INMOTION PARTS.

Part numbers include BCA NS99157, NATIONAL 99157 and WJB / INMOTION PARTS WS99157.

This table covers the seals at the Oil Pump. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Oil Pump Seal parts for the 2018 Honda CR-V come from 2 brands — NATIONAL and WJB / INMOTION PARTS.

This group includes NATIONAL 711005 and WJB / INMOTION PARTS WS711005.

This table covers the pistons that travel in each cylinder. Typical signs include knock, blow-by, or a cylinder that will not hold compression. Piston work is a short-block job. Match bore, pin and ring pack in the notes — not the photo. Read more

4 Piston parts for the 2018 Honda CR-V come from 2 brands — ENGINETECH and TOPLINE.

This group includes ENGINETECH P15084, ENGINETECH K15084P and TOPLINE PAH54BE and the remaining parts above.

This table covers the rings that seal each piston to the cylinder wall. Read more

6 Piston Ring parts for the 2018 Honda CR-V come from 4 brands — HASTINGS MANUFACTURING, TOPLINE, ENGINETECH and 1 other brand. The "Popular" part is HASTINGS MANUFACTURING 2C5147.