This page lists 4 interior parts for the 1949 Hudson Commodore Series, across 4 part types, covering both the 4.2L 254cid L8 and the 4.3L 262cid L6. Every part shows its brand, manufacturer part number and fitment notes.
On the 1949 Hudson Commodore Series, the interior covers cabin hardware — seat components, handles, switch bezels, carpet, pedals and the pieces that take daily wear. Most of the listed parts are Accelerator Pedal Pad (1 part), Brake Pedal Pad (1 part) and Floor Mat (1 part). The other 1 part type covers the remaining 1 part.
The 1949 Hudson Commodore Series was sold with both the 4.2L 254cid L8 and the 4.3L 262cid L6. All 4 parts on this page fit every engine.
Every interior part listed for the 1949 Hudson Commodore Series comes from METRO.
Each part number listed for the 1949 Hudson Commodore Series opens a page with every vehicle that part fits.
Accelerator Pedal Pad
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| METRO Fits: all 1949 Commodore Series engines | AP23 | 🇺🇸 US 🇨🇦 CA | Sold Individually | View on Amazon |
This table covers the Accelerator Pedal pads. Typical signs include squeal, grind, or a wear-indicator scrape. Replace pads as an axle set and inspect the rotor or drum they ride on.
This group shows a single part: METRO AP23.
Brake Pedal Pad
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| METRO Fits: all 1949 Commodore Series engines | CB15A | 🇺🇸 US 🇨🇦 CA | Sold in PairsReproduction | View on Amazon |
This table covers the Brake Pedal pads. Typical signs include squeal, grind, or a wear-indicator scrape. Replace pads as an axle set and inspect the rotor or drum they ride on.
This group shows a single part: METRO CB15A.
Floor Mat
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| METRO Fits: all 1949 Commodore Series engines | AC35 | 🇺🇸 US 🇨🇦 CA | Sold IndividuallyBlack Rubber with Molded Original Emblem | View on Amazon |
This table covers the floor mats cut for this cabin.
This group shows a single part: METRO AC35.
Headliner Grommet
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| METRO Fits: all 1949 Commodore Series engines | SM55H | 🇺🇸 US 🇨🇦 CA | Base ModelHEADLINER BOW GROMMET, 48-54 HUDSON | View on Amazon |
This table covers the Headliner grommets.
One part is listed for the 1949 Hudson Commodore Series — METRO SM55H.
Buying Interior Parts for a 1949 Hudson Commodore Series
On this vehicle, the interior covers cabin hardware — seat components, handles, switch bezels, carpet, pedals and the pieces that take daily wear.
- You do not need to pick an engine: every interior part on this page fits both the 4.2L 254cid L8 and the 4.3L 262cid L6.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the retainer clips with any panel removal — they are cheap insurance against squeaks.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Accelerator Pedal Pad and Brake Pedal Pad .
Frequently Asked Questions
How many interior parts fit the 1949 Hudson Commodore Series?
Our catalog currently lists 4 interior parts for the 1949 Hudson Commodore Series across 4 subcategories and 1 brand, covering both the 4.2L 254cid L8 and the 4.3L 262cid L6. Each part is matched to the engine(s) it fits.
Do interior parts differ between 1949 Hudson Commodore Series engines?
No. On this page every interior part fits both the 4.2L 254cid L8 and the 4.3L 262cid L6. You do not need to pick an engine to choose the right row — use the notes for position and trim.
What are the signs of interior problems on a 1949 Hudson Commodore Series?
Common symptoms include a door handle that works only from outside, sagging headliner, a window switch that needs two presses, or seat adjusters that stick. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the retainer clips with any panel removal — they are cheap insurance against squeaks.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1949 Hudson Commodore Series was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 1949 Hudson Commodore Series?
Every part on this page already fits both the 4.2L 254cid L8 and the 4.3L 262cid L6. Then interior plastics are often color- and trim-specific — check the notes column against your trim level before ordering. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 1949 Hudson Commodore Series
Interior Parts for Other Hudson Commodore Series Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.