2004 Hyundai Tiburon Engine Parts

This table covers the wear sleeves used to restore a Camshaft seal surface. Read more

6 Camshaft Repair Sleeve parts are listed for the 2004 Hyundai Tiburon, from NATIONAL, SKF, BCA and 3 other brands. NATIONAL 99139 carries the "Popular" badge.

Listed part numbers: NATIONAL 99139 and BCA NS99139, plus the other parts above.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

12 Camshaft Seal parts are listed for the 2004 Hyundai Tiburon, from NATIONAL, SKF, TIMKEN and 9 other brands. NATIONAL 3771 carries the "Popular" badge.

This table covers the Circular / Semi-Circular plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

One part is listed for the 2004 Hyundai Tiburon — HYUNDAI 2244223500.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

4 Connecting Rod Bearing parts for the 2004 Hyundai Tiburon come from 4 brands — ENGINETECH, ITM ENGINE COMPONENTS, KING ENGINE BEARINGS and 1 other brand.

Listed part numbers: ENGINETECH BB1007, ITM ENGINE COMPONENTS 4B9644 and KING ENGINE BEARINGS CR4235AM, plus the other parts above.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

5 Conversion / Lower Gasket Set parts for the 2004 Hyundai Tiburon come from 5 brands — ENGINETECH, AJUSA, APEX and 2 other brands. The "Popular" part is ENGINETECH HY20CSA.

This group includes ENGINETECH HY20CSA, AJUSA 54120000 and APEX ACS2031 and the remaining parts above.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

5 Crankshaft Main Bearing parts are listed for the 2004 Hyundai Tiburon, from TOPLINE, ENGINETECH, ITM ENGINE COMPONENTS and 1 other brand. ENGINETECH BC1006 carries the "Popular" badge.

Listed part numbers: ENGINETECH BC1006, ITM ENGINE COMPONENTS 5M9517 and KING ENGINE BEARINGS MB5256AM, plus the other parts above.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

5 Crankshaft Repair Sleeve parts are listed for the 2004 Hyundai Tiburon, from BCA, NATIONAL, SCHAEFFLER and 2 other brands. BCA NS99315 carries the "Popular" badge.

Part numbers include BCA NS99315, NATIONAL 99315 and SCHAEFFLER SR3549, among others listed above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

24 Crankshaft Seal parts are listed for the 2004 Hyundai Tiburon, from VICTOR REINZ, FEL-PRO, NATIONAL and 12 other brands. FEL-PRO TCS46017 carries the "Popular" badge.

This table covers the bolts that clamp the cylinder head to the block. Read more

11 Cylinder Head Bolt parts for the 2004 Hyundai Tiburon come from 10 brands — HYUNDAI, ENGINETECH, FEL-PRO and 7 other brands. The "Popular" part is ENGINETECH HB232.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Cylinder Head Gasket parts for the 2004 Hyundai Tiburon come from 5 brands — FEL-PRO, AJUSA, APEX and 2 other brands. The "Popular" part is FEL-PRO 26181PT.

This group includes FEL-PRO 26181PT, AJUSA 10141800 and APEX AHG268 and the remaining parts above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

10 Cylinder Head Gasket Set parts for the 2004 Hyundai Tiburon come from 7 brands — FEL-PRO, ENGINETECH, VICTOR REINZ and 4 other brands. The "Popular" part is APEX AHS2068.

This table covers the Cylinder Head Spacer shims. Read more

2 Cylinder Head Spacer Shim parts for the 2004 Hyundai Tiburon come from 2 brands — ENGINETECH and SBI.

This group includes ENGINETECH CHS1047 and SBI 2302136.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

One part is listed for the 2004 Hyundai Tiburon — KAT'S HEATERS 11402.

This table covers the Engine covers. Read more

This group shows a single part: TECHPRO HY1228105.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

4 Engine Kit Gasket Set parts for the 2004 Hyundai Tiburon come from 4 brands — APEX, ENGINETECH, ITM ENGINE COMPONENTS and 1 other brand.

Part numbers include APEX AFS2068, ENGINETECH HY20K1 and ITM ENGINE COMPONENTS 0900839, among others listed above.

This table covers the Engine rebuild kits. Read more

This group shows a single part: ENGINETECH RCHY20CP.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

6 Exhaust Valve parts are listed for the 2004 Hyundai Tiburon, from ENGINETECH, MELLING, HYUNDAI and 3 other brands. ENGINETECH EM1003 carries the "Popular" badge.

Part numbers include ENGINETECH EM1003, MELLING V0817 and HYUNDAI 2221223600, among others listed above.

This table covers the Expansion plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

2 Expansion Plug parts for the 2004 Hyundai Tiburon come from 2 brands — ENGINETECH and TOPLINE.

Part numbers include ENGINETECH PK914 and TOPLINE EPSMI4.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

5 Harmonic Balancer parts for the 2004 Hyundai Tiburon come from 4 brands — HYUNDAI, SKP, ATP and 1 other brand. The "Popular" part is HYUNDAI 2312423515.

The Economy section lists 1 option from SKP — the catalog's value-priced group. SKP SK594546 is listed in this group.

In the Standard Replacement grade, HYUNDAI, ATP and DORMAN supply 4 parts: built to original-equipment specification. A representative part number is HYUNDAI 2312423515.

This group includes HYUNDAI 2312423515, SKP SK594546 and ATP 102218 and the remaining parts above.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

7 Intake Manifold Gasket parts for the 2004 Hyundai Tiburon come from 7 brands — FEL-PRO, MAHLE / CLEVITE, AJUSA and 4 other brands. The "Popular" part is FEL-PRO MS96275.

This group includes FEL-PRO MS96275, MAHLE / CLEVITE MS19326 and AJUSA 13174400 and the remaining parts above.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

7 Intake Valve parts are listed for the 2004 Hyundai Tiburon, from HYUNDAI, MELLING, ENGINETECH and 4 other brands. HYUNDAI 2221123600 carries the "Popular" badge.

Listed part numbers: HYUNDAI 2221123600, MELLING V0816 and ENGINETECH IM1002, plus the other parts above.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

22 Motor Mount parts are listed for the 2004 Hyundai Tiburon, from ANCHOR, WESTAR, SKP and 5 other brands. SKP SKM8942 carries the "Popular" badge.

Economy: 4 parts, from SKP and FAMOUS BRAND. A representative part number is SKP SKM8942.

The Standard Replacement section: 17 options from ANCHOR, WESTAR, BECK/ARNLEY and 3 other brands. HYUNDAI 219102D050 is listed in this group.

1 ungrouped part is not assigned to a grade, with the same engine-level match.

This table covers the brackets that mount the Motor Mount. Typical signs include a cracked mount, a rattle, or a bracket that no longer holds alignment. Confirm position in the notes. Many brackets look alike and bolt to different corners. Read more

One part is listed for the 2004 Hyundai Tiburon — DEA / MARMON RIDE CONTROL A4127.

This table covers the Motor Mount kits. Read more

ANCHOR supplies both parts for the 2004 Hyundai Tiburon.

Part numbers include ANCHOR 301360 and ANCHOR 301359.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

81 Oil parts are listed for the 2004 Hyundai Tiburon, from VALVOLINE, LIQUI MOLY, MOBIL and 3 other brands. MOBIL 125195 carries the "Popular" badge. Grades run from Conventional through Synthetic Blend; Full Synthetic is the most populated section, led by LIQUI MOLY, VALVOLINE, MOBIL and 1 other brand.

This table covers the Oil Cooler Mounting kits. Read more

2 Oil Cooler Mounting Kit parts for the 2004 Hyundai Tiburon come from HAYDEN.

Listed part numbers: HAYDEN 238 and HAYDEN 153.

This table covers the drain plugs in the oil pan. Read more

6 Oil Drain Plug parts are listed for the 2004 Hyundai Tiburon, from DORMAN, AGS, REIN and 1 other brand. DORMAN 090033 carries the "Popular" badge.

Part numbers include DORMAN 090033, DORMAN 090053 and AGS ODP00007, among others listed above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

9 Oil Drain Plug Gasket parts for the 2004 Hyundai Tiburon come from 7 brands — DORMAN, FEL-PRO, ACKOJA and 4 other brands. The "Popular" part is DORMAN 095147.

This group includes DORMAN 095147, FEL-PRO 72515 and ACKOJA A530068 and the remaining parts above.

This table covers the caps on the oil filler neck. Read more

5 Oil Filler Cap parts are listed for the 2004 Hyundai Tiburon, from MOTORAD, BECK/ARNLEY, GATES and 2 other brands. MOTORAD MO81 carries the "Popular" badge.

Listed part numbers: MOTORAD MO81, BECK/ARNLEY 0160125 and GATES 31109, plus the other parts above.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

20 Oil Filter parts are listed for the 2004 Hyundai Tiburon, from BOSCH, VARIOUS MFR, WIX and 13 other brands. WIX 51334XP carries the "Popular" badge.

Economy: 5 parts, from BOSCH, FRAM, FVP and 2 other brands. A representative part number is BOSCH 72228WS.

In the High Performance / Heavy Duty grade, WIX and MOBIL supply 2 parts: grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. A representative part number is WIX 51334XP.

The Standard Replacement section: 13 options from HYUNDAI, BOSCH, DENSO and 9 other brands. BOSCH 3312 is listed in this group.