2007 Hyundai Tiburon Engine Parts

This table covers the camshafts that open the valves. Read more

One part is listed for the 2007 Hyundai Tiburon — AJUSA 93072500.

This table covers the Camshaft plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

5 Camshaft Plug parts are listed for the 2007 Hyundai Tiburon, from FEL-PRO, ELRING, HYUNDAI and 2 other brands. FEL-PRO CP75023 carries the "Popular" badge. 1 part fits every engine; the other 4 are engine-specific.

Part numbers include FEL-PRO CP75023, ELRING 725780 and HYUNDAI 2232735504, among others listed above.

This table covers the wear sleeves used to restore a Camshaft seal surface. Read more

8 Camshaft Repair Sleeve parts for the 2007 Hyundai Tiburon come from 6 brands — NATIONAL, WJB / INMOTION PARTS, SKF and 3 other brands. The "Popular" part is NATIONAL 99139. 2 parts fit every engine; the other 6 are engine-specific.

This group includes NATIONAL 99139 and BCA NS99139 and the remaining parts above.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

33 Camshaft Seal parts for the 2007 Hyundai Tiburon come from 15 brands — FEL-PRO, NATIONAL, APEX and 12 other brands. The "Popular" part is BCA NS223010. A list this long means Camshaft Seal applications vary by configuration — the notes carry the qualifiers.

This table covers the Circular / Semi-Circular plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

3 Circular / Semi-Circular Plug parts for the 2007 Hyundai Tiburon come from 3 brands — APEX, ELRING and HYUNDAI.

Part numbers include APEX ACP203, ELRING 372780 and HYUNDAI 2244223500.

This table covers the connecting rods between each piston and the crankshaft. Read more

One part is listed for the 2007 Hyundai Tiburon — TOPLINE CRHY7.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

7 Connecting Rod Bearing parts are listed for the 2007 Hyundai Tiburon, from ENGINETECH, ITM ENGINE COMPONENTS, TOPLINE and 1 other brand.

Part numbers include ENGINETECH BB1007, ENGINETECH BB1507 and ITM ENGINE COMPONENTS 4B9644, among others listed above.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

10 Conversion / Lower Gasket Set parts are listed for the 2007 Hyundai Tiburon, from APEX, ENGINETECH, AJUSA and 3 other brands. APEX ACS2042 carries the "Popular" badge.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

10 Crankshaft Main Bearing parts for the 2007 Hyundai Tiburon come from 4 brands — TOPLINE, ENGINETECH, ITM ENGINE COMPONENTS and 1 other brand. The "Popular" part is ENGINETECH BC1040.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

9 Crankshaft Repair Sleeve parts for the 2007 Hyundai Tiburon come from 5 brands — BCA, NATIONAL, TIMKEN and 2 other brands. The "Popular" part is BCA NS99315.

Listed part numbers: BCA NS99315, BCA NS99145 and NATIONAL 99315, plus the other parts above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

52 Crankshaft Seal parts for the 2007 Hyundai Tiburon come from 18 brands — VICTOR REINZ, TIMKEN, APEX and 15 other brands. The "Popular" part is APEX ABS209. A list this long means Crankshaft Seal applications vary by configuration — the notes carry the qualifiers.

This table covers the bolts that clamp the cylinder head to the block. Read more

17 Cylinder Head Bolt parts are listed for the 2007 Hyundai Tiburon, from ENGINETECH, FEL-PRO, AJUSA and 8 other brands. ENGINETECH HB232 carries the "Popular" badge.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

22 Cylinder Head Gasket parts are listed for the 2007 Hyundai Tiburon, from APEX, FEL-PRO, AJUSA and 6 other brands. APEX AHG268 carries the "Popular" badge.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

22 Cylinder Head Gasket Set parts are listed for the 2007 Hyundai Tiburon, from ENGINETECH, FEL-PRO, VICTOR REINZ and 6 other brands. APEX AHS2068 carries the "Popular" badge.

This table covers the Cylinder Head Spacer shims. Read more

4 Cylinder Head Spacer Shim parts are listed for the 2007 Hyundai Tiburon, from SBI and ENGINETECH.

Part numbers include ENGINETECH CHS1047, SBI 2302136 and SBI 2302191L, among others listed above.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

This group shows a single part: KAT'S HEATERS 11402.

This table covers the Engine covers. Read more

One part is listed for the 2007 Hyundai Tiburon — TECHPRO HY1228105.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

7 Engine Kit Gasket Set parts are listed for the 2007 Hyundai Tiburon, from APEX, TOPLINE, AJUSA and 2 other brands.

Part numbers include AJUSA 50214200, APEX AFS2068 and APEX AFS2079, among others listed above.

This table covers the Engine rebuild kits. Read more

One part is listed for the 2007 Hyundai Tiburon — ENGINETECH RCHY27AP.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

11 Exhaust Valve parts for the 2007 Hyundai Tiburon come from 7 brands — ENGINETECH, MELLING, SBI and 4 other brands. The "Popular" part is ENGINETECH EM1003.

This table covers the Expansion plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

3 Expansion Plug parts are listed for the 2007 Hyundai Tiburon, from TOPLINE and ENGINETECH.

This group includes ENGINETECH PK914, TOPLINE EPSMI4 and TOPLINE EPSHY7.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

11 Harmonic Balancer parts are listed for the 2007 Hyundai Tiburon, from SKP, HYUNDAI, ATP and 4 other brands. SKP SK594268 carries the "Popular" badge.

In the Economy grade, SKP supplies 2 parts: the catalog's value-priced group. A representative part number is SKP SK594268.

The Standard Replacement section lists 8 options from HYUNDAI, ATP, DORMAN and 2 other brands — built to original-equipment specification. HYUNDAI 2312423515 is listed in this group.

1 ungrouped part is not assigned to a grade, with the same engine-level match.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

16 Intake Manifold Gasket parts are listed for the 2007 Hyundai Tiburon, from APEX, FEL-PRO, MAHLE / CLEVITE and 5 other brands. APEX AMS2420 carries the "Popular" badge.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

7 Intake Plenum Gasket parts for the 2007 Hyundai Tiburon come from 6 brands — VICTOR REINZ, FEL-PRO, MAHLE / CLEVITE and 3 other brands. The "Popular" part is FEL-PRO MS96591.

This group includes FEL-PRO MS96591, MAHLE / CLEVITE MS19307 and AJUSA 00855400 and the remaining parts above.