2005 Hyundai Tiburon Engine Parts

This table covers the wear sleeves used to restore a Camshaft seal surface. Read more

6 Camshaft Repair Sleeve parts for the 2005 Hyundai Tiburon come from 6 brands — NATIONAL, SKF, BCA and 3 other brands. The "Popular" part is NATIONAL 99139.

Part numbers include NATIONAL 99139 and BCA NS99139, among others listed above.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

12 Camshaft Seal parts for the 2005 Hyundai Tiburon come from 12 brands — NATIONAL, SKF, TIMKEN and 9 other brands. The "Popular" part is NATIONAL 3771.

This table covers the Circular / Semi-Circular plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

This group shows a single part: HYUNDAI 2244223500.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

4 Connecting Rod Bearing parts are listed for the 2005 Hyundai Tiburon, from ENGINETECH, ITM ENGINE COMPONENTS, KING ENGINE BEARINGS and 1 other brand.

Part numbers include ENGINETECH BB1007, ITM ENGINE COMPONENTS 4B9644 and KING ENGINE BEARINGS CR4235AM, among others listed above.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

5 Conversion / Lower Gasket Set parts are listed for the 2005 Hyundai Tiburon, from ENGINETECH, AJUSA, APEX and 2 other brands. ENGINETECH HY20CSA carries the "Popular" badge.

This group includes ENGINETECH HY20CSA, AJUSA 54120000 and APEX ACS2031 and the remaining parts above.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

6 Crankshaft Main Bearing parts for the 2005 Hyundai Tiburon come from 4 brands — ENGINETECH, TOPLINE, ITM ENGINE COMPONENTS and 1 other brand. The "Popular" part is ENGINETECH BC1006.

Listed part numbers: ENGINETECH BC1006, ENGINETECH BC1040 and ITM ENGINE COMPONENTS 5M9517, plus the other parts above.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

5 Crankshaft Repair Sleeve parts for the 2005 Hyundai Tiburon come from 5 brands — BCA, NATIONAL, SCHAEFFLER and 2 other brands. The "Popular" part is BCA NS99315.

Listed part numbers: BCA NS99315, NATIONAL 99315 and SCHAEFFLER SR3549, plus the other parts above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

24 Crankshaft Seal parts for the 2005 Hyundai Tiburon come from 15 brands — VICTOR REINZ, FEL-PRO, NATIONAL and 12 other brands. The "Popular" part is FEL-PRO TCS46017.

This table covers the bolts that clamp the cylinder head to the block. Read more

11 Cylinder Head Bolt parts are listed for the 2005 Hyundai Tiburon, from HYUNDAI, ENGINETECH, FEL-PRO and 7 other brands. ENGINETECH HB232 carries the "Popular" badge.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Cylinder Head Gasket parts are listed for the 2005 Hyundai Tiburon, from FEL-PRO, AJUSA, APEX and 2 other brands. FEL-PRO 26181PT carries the "Popular" badge.

Listed part numbers: FEL-PRO 26181PT, AJUSA 10141800 and APEX AHG268, plus the other parts above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

10 Cylinder Head Gasket Set parts are listed for the 2005 Hyundai Tiburon, from FEL-PRO, ENGINETECH, VICTOR REINZ and 4 other brands. APEX AHS2068 carries the "Popular" badge.

This table covers the Cylinder Head Spacer shims. Read more

2 Cylinder Head Spacer Shim parts are listed for the 2005 Hyundai Tiburon, from ENGINETECH and SBI.

This group includes ENGINETECH CHS1047 and SBI 2302136.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

This group shows a single part: KAT'S HEATERS 11402.

This table covers the Engine covers. Read more

One part is listed for the 2005 Hyundai Tiburon — TECHPRO HY1228105.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

4 Engine Kit Gasket Set parts are listed for the 2005 Hyundai Tiburon, from APEX, ENGINETECH, ITM ENGINE COMPONENTS and 1 other brand.

This group includes APEX AFS2068, ENGINETECH HY20K1 and ITM ENGINE COMPONENTS 0900839 and the remaining parts above.

This table covers the Engine rebuild kits. Read more

One part is listed for the 2005 Hyundai Tiburon — ENGINETECH RCHY20CP.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

6 Exhaust Valve parts for the 2005 Hyundai Tiburon come from 6 brands — ENGINETECH, MELLING, HYUNDAI and 3 other brands. The "Popular" part is ENGINETECH EM1003.

Listed part numbers: ENGINETECH EM1003, MELLING V0817 and HYUNDAI 2221223600, plus the other parts above.

This table covers the Expansion plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

2 Expansion Plug parts are listed for the 2005 Hyundai Tiburon, from ENGINETECH and TOPLINE.

This group includes ENGINETECH PK914 and TOPLINE EPSMI4.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

5 Harmonic Balancer parts are listed for the 2005 Hyundai Tiburon, from HYUNDAI, SKP, ATP and 1 other brand. HYUNDAI 2312423515 carries the "Popular" badge.

In the Economy grade, SKP supplies 1 part: the catalog's value-priced group. A representative part number is SKP SK594546.

The Standard Replacement section lists 4 options from HYUNDAI, ATP and DORMAN — built to original-equipment specification. HYUNDAI 2312423515 is listed in this group.

Listed part numbers: HYUNDAI 2312423515, SKP SK594546 and ATP 102218, plus the other parts above.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

7 Intake Manifold Gasket parts are listed for the 2005 Hyundai Tiburon, from FEL-PRO, MAHLE / CLEVITE, AJUSA and 4 other brands. FEL-PRO MS96275 carries the "Popular" badge.

Listed part numbers: FEL-PRO MS96275, MAHLE / CLEVITE MS19326 and AJUSA 13174400, plus the other parts above.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

7 Intake Valve parts for the 2005 Hyundai Tiburon come from 7 brands — HYUNDAI, MELLING, ENGINETECH and 4 other brands. The "Popular" part is HYUNDAI 2221123600.

This group includes HYUNDAI 2221123600, MELLING V0816 and ENGINETECH IM1002 and the remaining parts above.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

22 Motor Mount parts for the 2005 Hyundai Tiburon come from 8 brands — ANCHOR, WESTAR, SKP and 5 other brands. The "Popular" part is SKP SKM8942.

The Economy section: 4 options from SKP and FAMOUS BRAND. SKP SKM8942 is listed in this group.

Standard Replacement: 17 parts, from ANCHOR, WESTAR, BECK/ARNLEY and 3 other brands. A representative part number is HYUNDAI 219102D050.

1 further part sits outside the graded sections, with the same engine-level match.

This table covers the brackets that mount the Motor Mount. Typical signs include a cracked mount, a rattle, or a bracket that no longer holds alignment. Confirm position in the notes. Many brackets look alike and bolt to different corners. Read more

This group shows a single part: DEA / MARMON RIDE CONTROL A4127.

This table covers the Motor Mount kits. Read more

2 Motor Mount Kit parts for the 2005 Hyundai Tiburon come from ANCHOR.

Listed part numbers: ANCHOR 301360 and ANCHOR 301359.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

102 Oil parts for the 2005 Hyundai Tiburon come from 6 brands — VALVOLINE, LIQUI MOLY, MOBIL and 3 other brands. The "Popular" part is MOBIL 125195. They are grouped as Conventional, Full Synthetic, High Mileage (>75,000 Miles), Racing and Synthetic Blend, with Full Synthetic the largest group at 61 parts from LIQUI MOLY, VALVOLINE, MOBIL and 1 other brand.

This table covers the Oil Cooler Mounting kits. Read more

HAYDEN supplies both parts for the 2005 Hyundai Tiburon.

This group includes HAYDEN 238 and HAYDEN 153.

This table covers the drain plugs in the oil pan. Read more

6 Oil Drain Plug parts for the 2005 Hyundai Tiburon come from 4 brands — DORMAN, AGS, REIN and 1 other brand. The "Popular" part is DORMAN 090033.

This group includes DORMAN 090033, DORMAN 090053 and AGS ODP00007 and the remaining parts above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

9 Oil Drain Plug Gasket parts are listed for the 2005 Hyundai Tiburon, from DORMAN, FEL-PRO, ACKOJA and 4 other brands. DORMAN 095147 carries the "Popular" badge.

Listed part numbers: DORMAN 095147, FEL-PRO 72515 and ACKOJA A530068, plus the other parts above.

This table covers the caps on the oil filler neck. Read more

5 Oil Filler Cap parts for the 2005 Hyundai Tiburon come from 5 brands — MOTORAD, BECK/ARNLEY, GATES and 2 other brands. The "Popular" part is MOTORAD MO81.

This group includes MOTORAD MO81, BECK/ARNLEY 0160125 and GATES 31109 and the remaining parts above.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

20 Oil Filter parts for the 2005 Hyundai Tiburon come from 16 brands — BOSCH, VARIOUS MFR, WIX and 13 other brands. The "Popular" part is WIX 51334XP.

The Economy section: 5 options from BOSCH, FRAM, FVP and 2 other brands. BOSCH 72228WS is listed in this group.

The High Performance / Heavy Duty section lists 2 options from WIX and MOBIL — grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. WIX 51334XP is listed in this group.

Standard Replacement: 13 parts, from HYUNDAI, BOSCH, DENSO and 9 other brands. A representative part number is BOSCH 3312.