2005 Hyundai Santa Fe Engine Parts

This table covers the Balance Shaft belts. Typical signs include squeal on cold start, cracked ribs, or glazing. Spin the tensioner and idlers by hand while the belt is off. Read more

8 Balance Shaft Belt parts for the 2005 Hyundai Santa Fe come from 8 brands — CLOYES, ITM ENGINE COMPONENTS, CONTINENTAL and 5 other brands. The "Popular" part is CONTINENTAL 40314.

The Economy section lists 2 options from CLOYES and ITM ENGINE COMPONENTS — the catalog's value-priced group. CLOYES B314 is listed in this group.

In the Standard Replacement grade, CONTINENTAL, GATES, ACDELCO and 2 other brands supply 5 parts: built to original-equipment specification. A representative part number is CONTINENTAL 40314.

1 further part sits outside the graded sections, with the same engine-level match.

This group includes CONTINENTAL 40314, CLOYES B314 and ITM ENGINE COMPONENTS 4314 and the remaining parts above.

This table covers the Balance Shaft Belt tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

6 Balance Shaft Belt Tensioner parts are listed for the 2005 Hyundai Santa Fe, from GATES, GMB, BECK/ARNLEY and 3 other brands. GATES T41038 carries the "Popular" badge.

This group includes GATES T41038, GMB 4461072 and BECK/ARNLEY 0241247 and the remaining parts above.

This table covers the wear sleeves used to restore a Balance Shaft seal surface. Read more

3 Balance Shaft Repair Sleeve parts for the 2005 Hyundai Santa Fe come from 3 brands — NATIONAL, SCHAEFFLER and WJB / INMOTION PARTS.

This group includes NATIONAL 99098, SCHAEFFLER SR3458 and WJB / INMOTION PARTS WS99098.

This table covers the seals at the Balance Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Balance Shaft Seal parts for the 2005 Hyundai Santa Fe come from 4 brands — BCA, JAPANESE OE, NATIONAL and 1 other brand.

Part numbers include BCA NS712007, JAPANESE OE F4225 and NATIONAL 712007, among others listed above.

This table covers the Camshaft plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

4 Camshaft Plug parts for the 2005 Hyundai Santa Fe come from 4 brands — FEL-PRO, HYUNDAI, MAHLE / CLEVITE and 1 other brand.

This group includes FEL-PRO CP75023, HYUNDAI 2232735504 and MAHLE / CLEVITE 67728 and the remaining parts above.

This table covers the wear sleeves used to restore a Camshaft seal surface. Read more

8 Camshaft Repair Sleeve parts are listed for the 2005 Hyundai Santa Fe, from NATIONAL, SCHAEFFLER, WJB / INMOTION PARTS and 2 other brands. NATIONAL 99139 carries the "Popular" badge.

Listed part numbers: NATIONAL 99139, BCA NS99139 and NATIONAL 99114, plus the other parts above.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

26 Camshaft Seal parts are listed for the 2005 Hyundai Santa Fe, from NATIONAL, SKF, BCA and 12 other brands. BCA NS223010 carries the "Popular" badge. The notes list position, dimensions and spec qualifiers wherever the manufacturer distinguishes between variants.

This table covers the Circular / Semi-Circular plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

3 Circular / Semi-Circular Plug parts are listed for the 2005 Hyundai Santa Fe, from APEX, FEL-PRO and VICTOR REINZ.

Part numbers include APEX ACP203, FEL-PRO CP75013 and VICTOR REINZ 711349400.

This table covers the connecting rods between each piston and the crankshaft. Read more

2 Connecting Rod parts for the 2005 Hyundai Santa Fe come from TOPLINE.

This group includes TOPLINE CRHY6 and TOPLINE CRMI30.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

13 Connecting Rod Bearing parts for the 2005 Hyundai Santa Fe come from 6 brands — KING ENGINE BEARINGS, MAHLE / CLEVITE, ENGINETECH and 3 other brands. The "Popular" part is ENGINETECH BB1827.

The High Performance section lists 4 options from KING ENGINE BEARINGS and MAHLE / CLEVITE — engineered beyond original-equipment specification. KING ENGINE BEARINGS CR4120XP is listed in this group.

Standard Replacement: 5 parts, from MAHLE / CLEVITE, ENGINETECH, KING ENGINE BEARINGS and 1 other brand. A representative part number is ENGINETECH BB1827.

4 further parts sit outside the graded sections, with the same engine-level match.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

12 Conversion / Lower Gasket Set parts for the 2005 Hyundai Santa Fe come from 7 brands — FEL-PRO, ENGINETECH, TOPLINE and 4 other brands. The "Popular" part is ENGINETECH HY24CSA.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

9 Crankshaft Main Bearing parts are listed for the 2005 Hyundai Santa Fe, from TOPLINE, ENGINETECH, KING ENGINE BEARINGS and 1 other brand. ENGINETECH BC1524 carries the "Popular" badge.

Listed part numbers: ENGINETECH BC1524, ENGINETECH BC1530 and ITM ENGINE COMPONENTS 4M9522, plus the other parts above.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

5 Crankshaft Repair Sleeve parts are listed for the 2005 Hyundai Santa Fe, from WJB / INMOTION PARTS, BCA, NATIONAL and 1 other brand.

Part numbers include BCA NS99145, NATIONAL 99145 and SCHAEFFLER SR3472, among others listed above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

41 Crankshaft Seal parts are listed for the 2005 Hyundai Santa Fe, from FEL-PRO, VICTOR REINZ, AJUSA and 13 other brands. AJUSA 15052700 carries the "Popular" badge. The notes list position, dimensions and spec qualifiers wherever the manufacturer distinguishes between variants.

This table covers the bolts that clamp the cylinder head to the block. Read more

13 Cylinder Head Bolt parts for the 2005 Hyundai Santa Fe come from 9 brands — ENGINETECH, FEL-PRO, AJUSA and 6 other brands. The "Popular" part is ENGINETECH HB177.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

21 Cylinder Head Gasket parts for the 2005 Hyundai Santa Fe come from 10 brands — FEL-PRO, MAHLE / CLEVITE, VICTOR REINZ and 7 other brands. The "Popular" part is FEL-PRO 26282PT.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

18 Cylinder Head Gasket Set parts for the 2005 Hyundai Santa Fe come from 9 brands — ENGINETECH, FEL-PRO, MAHLE / CLEVITE and 6 other brands. The "Popular" part is APEX AHS2045.

This table covers the Cylinder Head Spacer shims. Read more

This group shows a single part: SBI 2302149.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

One part is listed for the 2005 Hyundai Santa Fe — KAT'S HEATERS 11607.

This table covers the Engine covers. Read more

3 Engine Cover parts for the 2005 Hyundai Santa Fe come from TECHPRO.

This group includes TECHPRO HY1228138, TECHPRO HY1228141 and TECHPRO HY1228139.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

8 Engine Kit Gasket Set parts for the 2005 Hyundai Santa Fe come from 6 brands — ENGINETECH, TOPLINE, AJUSA and 3 other brands. The "Popular" part is ENGINETECH HY35K1.

Listed part numbers: ENGINETECH HY35K1, AJUSA 50422100 and APEX AFS2045, plus the other parts above.

This table covers the Engine rebuild kits. Read more

This group shows a single part: ENGINETECH RCHY24P.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

12 Exhaust Valve parts are listed for the 2005 Hyundai Santa Fe, from ENGINETECH, MELLING, SBI and 5 other brands. ENGINETECH EM2431 carries the "Popular" badge.

This table covers the Expansion plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

5 Expansion Plug parts for the 2005 Hyundai Santa Fe come from 2 brands — ENGINETECH and TOPLINE.

This group includes ENGINETECH PK914, ENGINETECH PK254 and ENGINETECH PK254B and the remaining parts above.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

5 Harmonic Balancer parts for the 2005 Hyundai Santa Fe come from 5 brands — SKP, ATP, DAYCO and 2 other brands. The "Popular" part is SKP SK594279.

The Economy section: 1 option from SKP. SKP SK594279 is listed in this group.

Standard Replacement: 4 parts, from ATP, DAYCO, DORMAN and 1 other brand. A representative part number is ATP 102213.

This group includes SKP SK594279, ATP 102213 and DAYCO PB1358N and the remaining parts above.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

10 Intake Manifold Gasket parts for the 2005 Hyundai Santa Fe come from 6 brands — FEL-PRO, AJUSA, MAHLE / CLEVITE and 3 other brands. The "Popular" part is APEX AMS2450.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

7 Intake Plenum Gasket parts are listed for the 2005 Hyundai Santa Fe, from APEX, MAHLE / CLEVITE, AJUSA and 4 other brands. APEX AMS2182 carries the "Popular" badge.

Part numbers include APEX AMS2182, MAHLE / CLEVITE MS19299 and AJUSA 01001100, among others listed above.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

12 Intake Valve parts are listed for the 2005 Hyundai Santa Fe, from ENGINETECH, MELLING, SBI and 5 other brands. ENGINETECH IM2400 carries the "Popular" badge.