93 Drivetrain parts are listed for the 2008 Hyundai Tucson, in 17 part types, covering both the 2.0L L4 and the 2.7L V6. Each one has a brand, a manufacturer part number and notes that say where it fits.
The drivetrain system on the 2008 Hyundai Tucson moves power from transmission to wheels through axles, CV joints, driveshafts, differentials and wheel-end hardware. The largest groups are CV Axle (20 parts), Differential Pinion Bearing / Race (15 parts) and Differential Carrier Bearing / Race (10 parts). The other 14 part types cover the remaining 48 parts.
The 2008 Hyundai Tucson was sold with both the 2.0L L4 and the 2.7L V6. Every part on this page is engine-specific. Each part shows which engine(s) it fits.
26 brands supply drivetrain parts for the 2008 Hyundai Tucson, led by WJB / INMOTION PARTS (14 parts), SKF (10 parts) and NATIONAL (9 parts), plus 23 more brands. Quality grades include Standard Replacement and Economy.
A "Popular" badge means the source catalog flagged the part as frequently chosen for the 2008 Hyundai Tucson. 16 parts have it, including APWI KA8009A (CV Axle) and MEVOTECH DX927 (CV Joint Boot). Each part number opens a page with every vehicle that part fits.
Axle Shaft Bearing
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| WJB / INMOTION PARTS Fits: 2.7L V6 | RB60062RS | 🇺🇸 US 🇨🇦 CA | Front4WD | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BCA Fits: 2.7L V6 | NB106CC | 🇺🇸 US 🇨🇦 CA | Front4WD | View on Amazon |
| NATIONAL Fits: 2.7L V6 | 106CC | 🇺🇸 US 🇨🇦 CA | Front4WD | View on Amazon |
This table covers the Axle Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.
3 Axle Shaft Bearing parts for the 2008 Hyundai Tucson come from 3 brands — WJB / INMOTION PARTS, BCA and NATIONAL.
The Economy section lists 1 option from WJB / INMOTION PARTS — the catalog's value-priced group. WJB / INMOTION PARTS RB60062RS is listed in this group.
In the Standard Replacement grade, BCA and NATIONAL supply 2 parts: built to original-equipment specification. A representative part number is BCA NB106CC.
This group includes WJB / INMOTION PARTS RB60062RS, BCA NB106CC and NATIONAL 106CC.
Axle Shaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| TIMKEN Fits: 2.7L V6 | SL260463 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
This table covers the seals where an axle shaft exits the housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
One part is listed for the 2008 Hyundai Tucson — TIMKEN SL260463.
CV Axle
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AUTO EXTRA Fits: 2.7L V6 | HY88689A | 🇺🇸 US 🇨🇦 CA | Rear LeftOE# 496002E000 | View on Amazon |
| CARDONE Fits: 2.7L V6 | 603429 | 🇺🇸 US 🇨🇦 CA | Remanufactured | View on Amazon |
| CARDONE Fits: 2.7L V6 | 603438 | 🇺🇸 US 🇨🇦 CA | Remanufactured | View on Amazon |
| CARDONE Fits: 2.7L V6 | 603439 | 🇺🇸 US 🇨🇦 CA | Remanufactured | View on Amazon |
| FAMOUS BRAND Fits: 2.7L V6 | NCV548488 | 🇺🇸 US 🇨🇦 CA | New CV Complete AssemblyREAR | View on Amazon |
| FAMOUS BRAND Fits: 2.7L V6 | 1700548488 | 🇺🇸 US 🇨🇦 CA | RightRear | View on Amazon |
| HERI Fits: 2.7L V6 | 88098 | 🇺🇸 US 🇨🇦 CA | Fits Rear Left4WD | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| APWI Popular Fits: 2.7L V6 | KA8009A | 🇺🇸 US 🇨🇦 CA | Front Right | View on Amazon |
| APWI Popular Fits: 2.7L V6 | HY8352A | 🇺🇸 US 🇨🇦 CA | Front Left | View on Amazon |
| TOP NOTCH Popular Fits: 2.7L V6 | TN60167 | 🇺🇸 US 🇨🇦 CA | Front Right | View on Amazon |
| TOP NOTCH Popular Fits: 2.7L V6 | TN60166 | 🇺🇸 US 🇨🇦 CA | Front Left | View on Amazon |
| CARDONE Fits: 2.7L V6 | 663504 | 🇺🇸 US 🇨🇦 CA | Front Left | View on Amazon |
| CARDONE Fits: 2.7L V6 | 663429 | 🇺🇸 US 🇨🇦 CA | Fits Rear Left4WD | View on Amazon |
| GSP Fits: 2.7L V6 | NCV37029 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
| GSP Fits: 2.7L V6 | NCV51522 | 🇺🇸 US 🇨🇦 CA | Front Right | View on Amazon |
| GSP Fits: 2.7L V6 | NCV51521 | 🇺🇸 US 🇨🇦 CA | Front Left | View on Amazon |
| TOP NOTCH Fits: 2.7L V6 | TN60016 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
| TRAKMOTIVE Fits: 2.7L V6 | KA8046 | 🇺🇸 US 🇨🇦 CA | Rear4WD | View on Amazon |
| TRAKMOTIVE Fits: 2.7L V6 | HY8370 | 🇺🇸 US 🇨🇦 CA | AAR Joint Design | View on Amazon |
| TRAKMOTIVE Fits: 2.7L V6 | HY8368 | 🇺🇸 US 🇨🇦 CA | AAR Joint Design | View on Amazon |
This table covers the complete CV axle shafts from differential (or hub) to wheel. Typical signs include a click in tight turns, grease flung around the wheel well, or a vibration that builds with speed. A torn boot caught early is a boot kit; caught late it is the whole axle. Torque the axle nut to the method in the notes.
20 CV Axle parts are listed for the 2008 Hyundai Tucson, from CARDONE, TOP NOTCH, GSP and 5 other brands. APWI KA8009A carries the "Popular" badge.
Economy: 7 parts, from CARDONE, FAMOUS BRAND, AUTO EXTRA and 1 other brand. A representative part number is AUTO EXTRA HY88689A.
The Standard Replacement section: 13 options from TOP NOTCH, GSP, TRAKMOTIVE and 2 other brands. APWI KA8009A is listed in this group.
CV Joint Boot
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MEVOTECH Popular Fits: 2.7L V6 | DX927 | 🇺🇸 US 🇨🇦 CA | Front Inner | View on Amazon |
| MEVOTECH Popular Fits: 2.7L V6 | DX892 | 🇺🇸 US 🇨🇦 CA | Front Outer | View on Amazon |
| BECK/ARNLEY Fits: 2.7L V6 | 1032827 | 🇺🇸 US 🇨🇦 CA | Front Inner | View on Amazon |
| BECK/ARNLEY Fits: 2.7L V6 | 1032804 | 🇺🇸 US 🇨🇦 CA | Front Outer | View on Amazon |
| GKN Fits: 2.7L V6 | 307107 | 🇺🇸 US 🇨🇦 CA | OUTER Diameter 0.984 In | View on Amazon |
| MEVOTECH Fits: 2.7L V6 | DX608 | 🇺🇸 US 🇨🇦 CA | Rear Inner | View on Amazon |
This table covers the boots that keep grease in a CV joint. Typical signs include a split boot, grease flung around the joint, or a click once grit is inside. A boot caught early is a kit. Once the joint has clicked, the joint itself is usually worn.
6 CV Joint Boot parts are listed for the 2008 Hyundai Tucson, from MEVOTECH, BECK/ARNLEY and GKN. MEVOTECH DX927 carries the "Popular" badge.
This group includes MEVOTECH DX927, MEVOTECH DX892 and BECK/ARNLEY 1032827 and the remaining parts above.
Differential Carrier Bearing / Race
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| WJB / INMOTION PARTS Fits: 2.7L V6 | WTLM501310 | 🇺🇸 US 🇨🇦 CA | Race | View on Amazon |
| WJB / INMOTION PARTS Fits: 2.7L V6 | WT30207 | 🇺🇸 US 🇨🇦 CA | Bearing & Race Set | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| NATIONAL Popular Fits: 2.7L V6 | 30207 | 🇺🇸 US 🇨🇦 CA | Bearing & Race Set | View on Amazon |
| SKF Popular Fits: 2.7L V6 | BR35 | 🇺🇸 US 🇨🇦 CA | Automatic trans. | View on Amazon |
| BCA Fits: 2.7L V6 | NB30207 | 🇺🇸 US 🇨🇦 CA | Bearing & Race Set | View on Amazon |
| SCHAEFFLER Fits: 2.7L V6 | KLM501349 | 🇺🇸 US 🇨🇦 CA | Bearing Only | View on Amazon |
| SCHAEFFLER Fits: 2.7L V6 | KT45 | 🇺🇸 US 🇨🇦 CA | Bearing and Race Set | View on Amazon |
| SKF Fits: 2.7L V6 | LM501310VP | 🇺🇸 US 🇨🇦 CA | Race | View on Amazon |
| SKF Fits: 2.7L V6 | BR30207 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
| TIMKEN Fits: 2.7L V6 | 30207 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
This table covers the bearings and races that support the differential carrier.
10 Differential Carrier Bearing / Race parts are listed for the 2008 Hyundai Tucson, from SKF, WJB / INMOTION PARTS, SCHAEFFLER and 3 other brands. NATIONAL 30207 carries the "Popular" badge.
Economy: 2 parts, from WJB / INMOTION PARTS. A representative part number is WJB / INMOTION PARTS WTLM501310.
The Standard Replacement section: 8 options from SKF, SCHAEFFLER, NATIONAL and 2 other brands. NATIONAL 30207 is listed in this group.
Differential Pinion Bearing / Race
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| WJB / INMOTION PARTS Popular Fits: 2.7L V6 | WTM86649 | 🇺🇸 US 🇨🇦 CA | Rear Outer4WD | View on Amazon |
| FAMOUS BRAND Fits: 2.7L V6 | SM86610 | 🇺🇸 US 🇨🇦 CA | Race | View on Amazon |
| WJB / INMOTION PARTS Fits: 2.7L V6 | WTM86610 | 🇺🇸 US 🇨🇦 CA | RaceCup Outside Diameter (In): 2.5310000000000001 In | View on Amazon |
| WJB / INMOTION PARTS Fits: 2.7L V6 | WTHM89449 | 🇺🇸 US 🇨🇦 CA | Rear Inner4WD | View on Amazon |
| WJB / INMOTION PARTS Fits: 2.7L V6 | WTHM89410 | 🇺🇸 US 🇨🇦 CA | RaceCup Outside Diameter (mm): 76.2 MM | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| NATIONAL Popular Fits: 2.7L V6 | M86610 | 🇺🇸 US 🇨🇦 CA | Taper Bearing CupRace | View on Amazon |
| NATIONAL Popular Fits: 2.7L V6 | M86649 | 🇺🇸 US 🇨🇦 CA | Taper Bearing Cone | View on Amazon |
| BCA Fits: 2.7L V6 | NBM86610 | 🇺🇸 US 🇨🇦 CA | Race | View on Amazon |
| BCA Fits: 2.7L V6 | NBHM89410 | 🇺🇸 US 🇨🇦 CA | Race | View on Amazon |
| BCA Fits: 2.7L V6 | NBM86649 | 🇺🇸 US 🇨🇦 CA | Bearing Shape: Cylindrical | View on Amazon |
| BCA Fits: 2.7L V6 | NBHM89449 | 🇺🇸 US 🇨🇦 CA | Rear Inner4WD | View on Amazon |
| NATIONAL Fits: 2.7L V6 | HM89410 | 🇺🇸 US 🇨🇦 CA | RaceTaper Bearing Cup | View on Amazon |
| NATIONAL Fits: 2.7L V6 | HM89449 | 🇺🇸 US 🇨🇦 CA | Rear Inner4WD | View on Amazon |
| SCHAEFFLER Fits: 2.7L V6 | KM86649 | 🇺🇸 US 🇨🇦 CA | Repair | View on Amazon |
| SKF Fits: 2.7L V6 | M86649610 | 🇺🇸 US 🇨🇦 CA | Rear Outer | View on Amazon |
This table covers the bearings and races on the differential pinion.
15 Differential Pinion Bearing / Race parts for the 2008 Hyundai Tucson come from 6 brands — WJB / INMOTION PARTS, NATIONAL, BCA and 3 other brands. The "Popular" part is WJB / INMOTION PARTS WTM86649.
The Economy section: 5 options from WJB / INMOTION PARTS and FAMOUS BRAND. WJB / INMOTION PARTS WTM86649 is listed in this group.
Standard Replacement: 10 parts, from NATIONAL, BCA, SCHAEFFLER and 1 other brand. A representative part number is NATIONAL M86610.
Differential Pinion Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| TIMKEN Fits: 2.7L V6 | SL260471 | 🇺🇸 US 🇨🇦 CA | RearLimited or SE Model | View on Amazon |
This table covers the seals at the differential pinion yoke. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
One part is listed for the 2008 Hyundai Tucson — TIMKEN SL260471.
Drive Shaft
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SKP Popular Fits: 2.7L V6 | SKDSTU05 | 🇺🇸 US 🇨🇦 CA | Rear4WD | View on Amazon |
| USA STANDARD GEAR Popular Fits: 2.7L V6 | ZDS159458 | 🇺🇸 US 🇨🇦 CA | Rear4WD | View on Amazon |
| DORMAN Fits: 2.7L V6 | 986099 | 🇺🇸 US 🇨🇦 CA | Length: 77.375" | View on Amazon |
| GSP Fits: 2.7L V6 | PS900273 | 🇺🇸 US 🇨🇦 CA | Rear4WD | View on Amazon |
| TOP NOTCH Fits: 2.7L V6 | TN3711PS | 🇺🇸 US 🇨🇦 CA | Rear4WD | View on Amazon |
| WJB / INMOTION PARTS Fits: 2.7L V6 | WDS86099 | 🇺🇸 US 🇨🇦 CA | Rear4WD | View on Amazon |
This table covers the driveshafts that carry torque from the transmission or transfer case.
6 Drive Shaft parts for the 2008 Hyundai Tucson come from 6 brands — SKP, USA STANDARD GEAR, DORMAN and 3 other brands. The "Popular" part is SKP SKDSTU05.
This group includes SKP SKDSTU05, USA STANDARD GEAR ZDS159458 and DORMAN 986099 and the remaining parts above.
Drive Shaft Center Support Bearing
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| WESTAR Fits: 2.7L V6 | DS6515 | 🇺🇸 US 🇨🇦 CA | 1.102" (28mm) Bearing I.D. | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DANA Popular Fits: 2.7L V6 | 25141752X | 🇺🇸 US 🇨🇦 CA | Spicer Select | View on Amazon |
| ANCHOR Fits: 2.7L V6 | 6101 | 🇺🇸 US 🇨🇦 CA | Centerwith 28mm Inside Diameter Bearing(s) | View on Amazon |
| BECK/ARNLEY Fits: 2.7L V6 | 1018144 | 🇺🇸 US 🇨🇦 CA | Center hole 27.9mm | View on Amazon |
| BECK/ARNLEY Fits: 2.7L V6 | 1018468 | 🇺🇸 US 🇨🇦 CA | Center hole 29.9mm | View on Amazon |
This table covers the Drive Shaft Center Support bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.
5 Drive Shaft Center Support Bearing parts for the 2008 Hyundai Tucson come from 4 brands — BECK/ARNLEY, WESTAR, DANA and 1 other brand. The "Popular" part is DANA 25141752X.
The Economy section: 1 option from WESTAR. WESTAR DS6515 is listed in this group.
Standard Replacement: 4 parts, from BECK/ARNLEY, DANA and ANCHOR. A representative part number is DANA 25141752X.
Listed part numbers: DANA 25141752X, WESTAR DS6515 and ANCHOR 6101, plus the other parts above.
Drive Shaft Flex Joint
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BECK/ARNLEY Fits: 2.7L V6 | 1033118 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| DORMAN Fits: 2.7L V6 | 935201 | 🇺🇸 US 🇨🇦 CA | 4WD | View on Amazon |
| MOOG Fits: 2.7L V6 | 677 | 🇺🇸 US 🇨🇦 CA | 4WDwith 78mm Bolt Diameter | View on Amazon |
| SKF Fits: 2.7L V6 | VKJF98023 | 🇺🇸 US 🇨🇦 CA | Flex Coupler | View on Amazon |
This table covers the flex joints in the driveshaft.
4 Drive Shaft Flex Joint parts are listed for the 2008 Hyundai Tucson, from BECK/ARNLEY, DORMAN, MOOG and 1 other brand.
Listed part numbers: BECK/ARNLEY 1033118, DORMAN 935201 and MOOG 677, plus the other parts above.
Gear Oil
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| IDEMITSU Fits: 2.7L V6 | 30305024750 | 🇺🇸 US | 75W90 Racing Gear Oil1 Quart | View on Amazon |
| MOBIL Fits: 2.7L V6 | 104361 | 🇺🇸 US 🇨🇦 CA | Synthetic Gear Lube Limited Slip 75W-901 Quart | View on Amazon |
This table covers the gear oils specified for the axle or transfer case. Typical signs include a low-oil lamp, knocking, or oil that has gone thin before the next interval. Match the viscosity and spec in the notes, not just the weight on the bottle.
2 Gear Oil parts are listed for the 2008 Hyundai Tucson, from IDEMITSU and MOBIL.
Listed part numbers: IDEMITSU 30305024750 and MOBIL 104361.
Transfer Case Fluid
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| IDEMITSU Fits: 2.7L V6 | 30305024750 | 🇺🇸 US | 75W90 Racing Gear Oil1 Quart | View on Amazon |
| MOBIL Fits: 2.7L V6 | 104361 | 🇺🇸 US 🇨🇦 CA | Synthetic Gear Lube Limited Slip 75W-901 Quart | View on Amazon |
This table covers the fluids specified for the transfer case. Typical signs include discolored fluid, a burnt smell, or a level that keeps dropping. Use only the specification in the notes — the tables group grades because they are not interchangeable.
2 Transfer Case Fluid parts are listed for the 2008 Hyundai Tucson, from IDEMITSU and MOBIL.
Part numbers include IDEMITSU 30305024750 and MOBIL 104361.
Transfer Case Input Shaft Bearing
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| WJB / INMOTION PARTS Fits: 2.7L V6 | RB6006 | 🇺🇸 US 🇨🇦 CA | 4WD | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BCA Fits: 2.7L V6 | NB106 | 🇺🇸 US 🇨🇦 CA | with Full Time 4WDwith 2 Speed Transfer Case | View on Amazon |
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| NATIONAL Fits: 2.7L V6 | 106 | 🇺🇸 US 🇨🇦 CA | 4WD | View on Amazon |
This table covers the Transfer Case Input Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.
3 Transfer Case Input Shaft Bearing parts are listed for the 2008 Hyundai Tucson, from WJB / INMOTION PARTS, BCA and NATIONAL.
Economy: 1 part, from WJB / INMOTION PARTS. A representative part number is WJB / INMOTION PARTS RB6006.
The Standard Replacement section: 1 option from BCA. BCA NB106 is listed in this group.
1 ungrouped part is not assigned to a grade, with the same engine-level match.
Part numbers include WJB / INMOTION PARTS RB6006, BCA NB106 and NATIONAL 106.
Transfer Case Input Shaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| NATIONAL Fits: 2.7L V6 | 710681 | 🇺🇸 US 🇨🇦 CA | Inner4WD | View on Amazon |
| SKF Fits: 2.7L V6 | 21252A | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| WJB / INMOTION PARTS Fits: 2.7L V6 | WS21252A | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| WJB / INMOTION PARTS Fits: 2.7L V6 | WS710681 | 🇺🇸 US 🇨🇦 CA | Inner4WD | View on Amazon |
This table covers the seals at the Transfer Case Input Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
4 Transfer Case Input Shaft Seal parts for the 2008 Hyundai Tucson come from 3 brands — WJB / INMOTION PARTS, NATIONAL and SKF.
This group includes NATIONAL 710681, SKF 21252A and WJB / INMOTION PARTS WS21252A and the remaining parts above.
Transfer Case Output Shaft Bearing
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SKF Fits: 2.7L V6 | 6006J | 🇺🇸 US 🇨🇦 CA | Front | View on Amazon |
This table covers the Transfer Case Output Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.
This group shows a single part: SKF 6006J.
Transfer Case Output Shaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SKF Popular Fits: 2.7L V6 | 16585A | 🇺🇸 US 🇨🇦 CA | Front Outer | View on Amazon |
| SKF Popular Fits: 2.7L V6 | 17700A | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
| NATIONAL Fits: 2.7L V6 | 711180 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
| SKF Fits: 2.7L V6 | 12559A | 🇺🇸 US 🇨🇦 CA | Front Inner | View on Amazon |
| WJB / INMOTION PARTS Fits: 2.7L V6 | WS12559A | 🇺🇸 US 🇨🇦 CA | Front Inner0.276 Width | View on Amazon |
| WJB / INMOTION PARTS Fits: 2.7L V6 | WS16585A | 🇺🇸 US 🇨🇦 CA | Front Outer0.394 Width | View on Amazon |
| WJB / INMOTION PARTS Fits: 2.7L V6 | WS17700A | 🇺🇸 US 🇨🇦 CA | Rear0.315 Width | View on Amazon |
This table covers the seals at the Transfer Case Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
7 Transfer Case Output Shaft Seal parts are listed for the 2008 Hyundai Tucson, from SKF, WJB / INMOTION PARTS and NATIONAL. SKF 16585A carries the "Popular" badge.
This group includes SKF 16585A, SKF 17700A and NATIONAL 711180 and the remaining parts above.
Universal Joint
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DANA Fits: 2.7L V6 | 25324251X | 🇺🇸 US 🇨🇦 CA | Spicer SelectGreasable | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DANA Fits: 2.7L V6 | 532451X | 🇺🇸 US 🇨🇦 CA | SpicerGreasable | View on Amazon |
| GKN Fits: 2.7L V6 | U080 | 🇺🇸 US 🇨🇦 CA | Pre-lubricated | View on Amazon |
This table covers the U-joints in the driveshaft.
3 Universal Joint parts are listed for the 2008 Hyundai Tucson, from DANA and GKN.
Economy: 1 part, from DANA. A representative part number is DANA 25324251X.
The Standard Replacement section: 2 options from DANA and GKN. DANA 532451X is listed in this group.
Listed part numbers: DANA 25324251X, DANA 532451X and GKN U080.
Buying Drivetrain Parts for a 2008 Hyundai Tucson
On this vehicle, the drivetrain system moves power from transmission to wheels through axles, CV joints, driveshafts, differentials and wheel-end hardware.
- Match the engine first. Every drivetrain part here is engine-specific; each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the differential or transfer-case fluid with any axle or seal job while everything is already open.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: CV Axle and Differential Pinion Bearing / Race .
Frequently Asked Questions
How many drivetrain parts fit the 2008 Hyundai Tucson?
Our catalog currently lists 93 drivetrain parts for the 2008 Hyundai Tucson across 17 subcategories and 26 brands, covering both the 2.0L L4 and the 2.7L V6. Each part is matched to the engine(s) it fits.
Do drivetrain parts differ between 2008 Hyundai Tucson engines?
Yes. Every drivetrain part on this page is engine-specific. Each row shows which engine(s) it fits — use the filter at the top to hide the rest. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of drivetrain problems on a 2008 Hyundai Tucson?
Common symptoms include clicking in tight turns, a clunk when shifting between drive and reverse, vibration that builds with speed, or gear oil on the inside of a wheel. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the differential or transfer-case fluid with any axle or seal job while everything is already open.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2008 Hyundai Tucson was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2008 Hyundai Tucson?
First match the engine — each row shows which engine(s) the part fits. Then a torn CV boot caught early is a cheap boot kit; caught late it is a whole axle — inspect before deciding which to buy. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2008 Hyundai Tucson
Drivetrain Parts for Other Hyundai Tucson Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.