2012 Hyundai Tucson Drivetrain Parts

This table covers the seals where an axle shaft exits the housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: TIMKEN SL260463.

This table covers the complete CV axle shafts from differential (or hub) to wheel. Typical signs include a click in tight turns, grease flung around the wheel well, or a vibration that builds with speed. A torn boot caught early is a boot kit; caught late it is the whole axle. Torque the axle nut to the method in the notes. Read more

25 CV Axle parts for the 2012 Hyundai Tucson come from 5 brands — GSP, TRAKMOTIVE, TOP NOTCH and 2 other brands. The "Popular" part is APWI HY8459A. 7 parts fit every engine; the other 18 are engine-specific.

This table covers the CV Intermediate shafts. Read more

3 CV Intermediate Shaft parts are listed for the 2012 Hyundai Tucson, from GSP, TOP NOTCH and TRAKMOTIVE.

This group includes GSP NEX37001, TOP NOTCH TN60199IS and TRAKMOTIVE HY3503.

This table covers the boots that keep grease in a CV joint. Typical signs include a split boot, grease flung around the joint, or a click once grit is inside. A boot caught early is a kit. Once the joint has clicked, the joint itself is usually worn. Read more

5 CV Joint Boot parts for the 2012 Hyundai Tucson come from 2 brands — BECK/ARNLEY and MEVOTECH. The "Popular" part is MEVOTECH DX556. 4 parts fit every engine; the other 1 is engine-specific.

Part numbers include MEVOTECH DX556, BECK/ARNLEY 1032892 and BECK/ARNLEY 1033033, among others listed above.

This table covers the bearings and races that support the differential carrier. Read more

This group shows a single part: SKF BR30207.

This table covers the Differential Lock actuators. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

This group shows a single part: AAE DLA0100.

This table covers the bearings and races on the differential pinion. Read more

4 Differential Pinion Bearing / Race parts are listed for the 2012 Hyundai Tucson, from SKF and SCHAEFFLER. All of them fit every engine offered in the 2012 Tucson.

Listed part numbers: SCHAEFFLER KM86649, SKF HM89410VP and SKF M86649610, plus the other parts above.

This table covers the seals at the differential pinion yoke. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: TIMKEN SL260471.

This table covers the driveshafts that carry torque from the transmission or transfer case. Read more

4 Drive Shaft parts are listed for the 2012 Hyundai Tucson, from DORMAN, GSP, TOP NOTCH and 1 other brand.

This group includes DORMAN 976406, GSP PS900272 and TOP NOTCH TN3726PS and the remaining parts above.

This table covers the Drive Shaft Center Support bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

One part is listed for the 2012 Hyundai Tucson — BECK/ARNLEY 1018469.

This table covers the flex joints in the driveshaft. Read more

2 Drive Shaft Flex Joint parts for the 2012 Hyundai Tucson come from 2 brands — AAE and DORMAN.

Listed part numbers: AAE FJC0121 and DORMAN 935516.

This table covers the gear oils specified for the axle or transfer case. Typical signs include a low-oil lamp, knocking, or oil that has gone thin before the next interval. Match the viscosity and spec in the notes, not just the weight on the bottle. Read more

14 Gear Oil parts for the 2012 Hyundai Tucson come from 5 brands — VALVOLINE, LUCAS OIL, IDEMITSU and 2 other brands. The "Popular" part is MOBIL 104361. 1 part fits every engine; the other 13 are engine-specific.

This table covers the fluids specified for the transfer case. Typical signs include discolored fluid, a burnt smell, or a level that keeps dropping. Use only the specification in the notes — the tables group grades because they are not interchangeable. Read more

13 Transfer Case Fluid parts for the 2012 Hyundai Tucson come from 5 brands — VALVOLINE, LUCAS OIL, MOBIL and 2 other brands. The "Popular" part is MOBIL 104361. 1 part fits every engine; the other 12 are engine-specific.

This table covers the seals at the Transfer Case Input Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Transfer Case Input Shaft Seal parts are listed for the 2012 Hyundai Tucson, from SKF and WJB / INMOTION PARTS. All of them fit every engine offered in the 2012 Tucson.

This group includes SKF 21252A and WJB / INMOTION PARTS WS21252A.

This table covers the seals at the Transfer Case Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

6 Transfer Case Output Shaft Seal parts for the 2012 Hyundai Tucson come from 2 brands — SKF and WJB / INMOTION PARTS. The "Popular" part is SKF 13274A. Every part fits both the 2.0L L4 and the 2.4L L4.

This group includes SKF 13274A, SKF 22335A and SKF 17737A and the remaining parts above.