2011 Hyundai Tucson Drivetrain Parts

This table covers the seals where an axle shaft exits the housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2011 Hyundai Tucson — TIMKEN SL260463.

This table covers the complete CV axle shafts from differential (or hub) to wheel. Typical signs include a click in tight turns, grease flung around the wheel well, or a vibration that builds with speed. A torn boot caught early is a boot kit; caught late it is the whole axle. Torque the axle nut to the method in the notes. Read more

26 CV Axle parts are listed for the 2011 Hyundai Tucson, from TRAKMOTIVE, GSP, TOP NOTCH and 2 other brands. APWI HY8459A carries the "Popular" badge. The notes list position, dimensions and spec qualifiers wherever the manufacturer distinguishes between variants.

This table covers the CV Intermediate shafts. Read more

3 CV Intermediate Shaft parts for the 2011 Hyundai Tucson come from 3 brands — GSP, TOP NOTCH and TRAKMOTIVE.

Listed part numbers: GSP NEX37001, TOP NOTCH TN60199IS and TRAKMOTIVE HY3503.

This table covers the boots that keep grease in a CV joint. Typical signs include a split boot, grease flung around the joint, or a click once grit is inside. A boot caught early is a kit. Once the joint has clicked, the joint itself is usually worn. Read more

5 CV Joint Boot parts are listed for the 2011 Hyundai Tucson, from BECK/ARNLEY and MEVOTECH. MEVOTECH DX556 carries the "Popular" badge. All of them fit every engine offered in the 2011 Tucson.

Part numbers include MEVOTECH DX556, BECK/ARNLEY 1032892 and BECK/ARNLEY 1033033, among others listed above.

This table covers the bearings and races that support the differential carrier. Read more

One part is listed for the 2011 Hyundai Tucson — SKF BR30207.

This table covers the Differential Lock actuators. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

One part is listed for the 2011 Hyundai Tucson — AAE DLA0100.

This table covers the bearings and races on the differential pinion. Read more

4 Differential Pinion Bearing / Race parts for the 2011 Hyundai Tucson come from 2 brands — SKF and SCHAEFFLER. Every part fits both the 2.0L L4 and the 2.4L L4.

This group includes SCHAEFFLER KM86649, SKF HM89410VP and SKF M86649610 and the remaining parts above.

This table covers the seals at the differential pinion yoke. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2011 Hyundai Tucson — TIMKEN SL260471.

This table covers the driveshafts that carry torque from the transmission or transfer case. Read more

8 Drive Shaft parts for the 2011 Hyundai Tucson come from 7 brands — DORMAN, SKP, CARDONE and 4 other brands. The "Popular" part is DORMAN 976406. 1 part fits every engine; the other 7 are engine-specific.

Listed part numbers: DORMAN 976406, SKP SK976636 and CARDONE 653503, plus the other parts above.

This table covers the Drive Shaft Center Support bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

This group shows a single part: BECK/ARNLEY 1018469.

This table covers the flex joints in the driveshaft. Read more

2 Drive Shaft Flex Joint parts are listed for the 2011 Hyundai Tucson, from AAE and DORMAN.

Listed part numbers: AAE FJC0121 and DORMAN 935516.

This table covers the gear oils specified for the axle or transfer case. Typical signs include a low-oil lamp, knocking, or oil that has gone thin before the next interval. Match the viscosity and spec in the notes, not just the weight on the bottle. Read more

14 Gear Oil parts are listed for the 2011 Hyundai Tucson, from VALVOLINE, LUCAS OIL, IDEMITSU and 2 other brands. MOBIL 104361 carries the "Popular" badge. 1 part fits every engine; the other 13 are engine-specific.

This table covers the fluids specified for the transfer case. Typical signs include discolored fluid, a burnt smell, or a level that keeps dropping. Use only the specification in the notes — the tables group grades because they are not interchangeable. Read more

13 Transfer Case Fluid parts are listed for the 2011 Hyundai Tucson, from VALVOLINE, LUCAS OIL, MOBIL and 2 other brands. MOBIL 104361 carries the "Popular" badge. 1 part fits every engine; the other 12 are engine-specific.

This table covers the seals at the Transfer Case Input Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Transfer Case Input Shaft Seal parts for the 2011 Hyundai Tucson come from 2 brands — SKF and WJB / INMOTION PARTS. Every part fits both the 2.0L L4 and the 2.4L L4.

This group includes SKF 21252A and WJB / INMOTION PARTS WS21252A.

This table covers the seals at the Transfer Case Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

6 Transfer Case Output Shaft Seal parts are listed for the 2011 Hyundai Tucson, from SKF and WJB / INMOTION PARTS. SKF 13274A carries the "Popular" badge. All of them fit every engine offered in the 2011 Tucson.

This group includes SKF 13274A, SKF 22335A and SKF 17737A and the remaining parts above.

This table covers the viscous couplers in the AWD driveline. Read more

This group shows a single part: HYUNDAI 4780024700.