2011 Hyundai Genesis Coupe Engine Parts

This table covers the wear sleeves used to restore a Camshaft seal surface. Read more

This group shows a single part: SKF 99139.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Camshaft Seal parts for the 2011 Hyundai Genesis Coupe come from 2 brands — ELRING and SKF.

Part numbers include ELRING 127610 and SKF 13943.

This table covers the connecting rods between each piston and the crankshaft. Read more

One part is listed for the 2011 Hyundai Genesis Coupe — HYUNDAI 235102C400.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

8 Connecting Rod Bearing parts are listed for the 2011 Hyundai Genesis Coupe, from KING ENGINE BEARINGS, TOPLINE, MAHLE / CLEVITE and 2 other brands. MAHLE / CLEVITE CB1950A4 carries the "Popular" badge.

In the High Performance grade, KING ENGINE BEARINGS supplies 1 part: engineered beyond original-equipment specification. A representative part number is KING ENGINE BEARINGS CR4634XP.

The Standard Replacement section lists 3 options from MAHLE / CLEVITE, TOPLINE and ITM ENGINE COMPONENTS — built to original-equipment specification. MAHLE / CLEVITE CB1950A4 is listed in this group.

4 ungrouped parts are not assigned to a grade, with the same engine-level match.

Part numbers include MAHLE / CLEVITE CB1950A4, KING ENGINE BEARINGS CR4634XP and TOPLINE RBHY11, among others listed above.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

8 Conversion / Lower Gasket Set parts are listed for the 2011 Hyundai Genesis Coupe, from AJUSA, APEX, FEL-PRO and 3 other brands. APEX ACS2093 carries the "Popular" badge.

Listed part numbers: APEX ACS2093, FEL-PRO CS264201 and AJUSA 54243600, plus the other parts above.

This table covers the crankshafts that turn piston motion into rotation. Read more

2 Crankshaft parts are listed for the 2011 Hyundai Genesis Coupe, from SKP and TOPLINE.

In the Economy grade, SKP supplies 1 part: the catalog's value-priced group. A representative part number is SKP SKES9098.

The Standard Replacement section: 1 option from TOPLINE. TOPLINE CSHY20S is listed in this group.

Part numbers include SKP SKES9098 and TOPLINE CSHY20S.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

8 Crankshaft Main Bearing parts for the 2011 Hyundai Genesis Coupe come from 5 brands — TOPLINE, KING ENGINE BEARINGS, ENGINETECH and 2 other brands. The "Popular" part is ENGINETECH BC1030.

The High Performance section: 1 option from KING ENGINE BEARINGS. KING ENGINE BEARINGS MB5771XP is listed in this group.

Standard Replacement: 5 parts, from TOPLINE, ENGINETECH, MAHLE / CLEVITE and 1 other brand. A representative part number is ENGINETECH BC1030.

2 further parts sit outside the graded sections, with the same engine-level match.

Part numbers include ENGINETECH BC1030, KING ENGINE BEARINGS MB5771XP and MAHLE / CLEVITE MS2330A, among others listed above.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

8 Crankshaft Repair Sleeve parts for the 2011 Hyundai Genesis Coupe come from 4 brands — WJB / INMOTION PARTS, BCA, NATIONAL and 1 other brand. The "Popular" part is WJB / INMOTION PARTS WS99166.

Part numbers include WJB / INMOTION PARTS WS99166, BCA NS99166 and BCA NS99177, among others listed above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

40 Crankshaft Seal parts for the 2011 Hyundai Genesis Coupe come from 16 brands — VICTOR REINZ, FEL-PRO, APEX and 13 other brands. The "Popular" part is BCA NS224200. A list this long means Crankshaft Seal applications vary by configuration — the notes carry the qualifiers.

This table covers the bolts that clamp the cylinder head to the block. Read more

15 Cylinder Head Bolt parts are listed for the 2011 Hyundai Genesis Coupe, from AJUSA, APEX, FEL-PRO and 6 other brands. AJUSA 81045900 carries the "Popular" badge.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

18 Cylinder Head Gasket parts are listed for the 2011 Hyundai Genesis Coupe, from AJUSA, APEX, MAHLE / CLEVITE and 4 other brands. FEL-PRO 26416PT carries the "Popular" badge.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

8 Cylinder Head Gasket Set parts are listed for the 2011 Hyundai Genesis Coupe, from AJUSA, FEL-PRO, MAHLE / CLEVITE and 2 other brands. AJUSA 52349600 carries the "Popular" badge.

This group includes AJUSA 52349600, APEX AHS13046 and AJUSA 52686900 and the remaining parts above.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

2 Engine Block Heater parts for the 2011 Hyundai Genesis Coupe come from KAT'S HEATERS. Every part fits both the 2.0L L4 Turbocharged and the 3.8L V6.

Listed part numbers: KAT'S HEATERS 11812 and KAT'S HEATERS 28812.

This table covers the Engine covers. Read more

TECHPRO supplies the 5 Engine Cover parts for the 2011 Hyundai Genesis Coupe. TECHPRO HY1228150 carries the "Popular" badge. All of them fit every engine offered in the 2011 Genesis Coupe.

Part numbers include TECHPRO HY1228150, TECHPRO HY1228148 and TECHPRO HY1228147, among others listed above.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

AJUSA supplies the 3 Engine Kit Gasket Set parts for the 2011 Hyundai Genesis Coupe.

Listed part numbers: AJUSA 50423300, AJUSA 50313700 and AJUSA 50608000.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

10 Exhaust Valve parts for the 2011 Hyundai Genesis Coupe come from 7 brands — ENGINETECH, QUALCAST, TOPLINE and 4 other brands. The "Popular" part is HYUNDAI 222123C800.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

10 Harmonic Balancer parts are listed for the 2011 Hyundai Genesis Coupe, from HL MANDO, ATP, DAYCO and 3 other brands. HL MANDO 30A5010 carries the "Popular" badge.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

14 Intake Manifold Gasket parts are listed for the 2011 Hyundai Genesis Coupe, from AJUSA, BECK/ARNLEY, VICTOR REINZ and 2 other brands. FEL-PRO MS97086 carries the "Popular" badge.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Intake Plenum Gasket parts for the 2011 Hyundai Genesis Coupe come from 4 brands — FEL-PRO, BECK/ARNLEY, MAHLE / CLEVITE and 1 other brand. The "Popular" part is FEL-PRO MS97227.

This group includes FEL-PRO MS97227, BECK/ARNLEY 0374875 and FEL-PRO MS97407 and the remaining parts above.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

10 Intake Valve parts for the 2011 Hyundai Genesis Coupe come from 6 brands — MELLING, SBI, QUALCAST and 3 other brands. The "Popular" part is MELLING V3255.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

13 Motor Mount parts for the 2011 Hyundai Genesis Coupe come from 6 brands — DEA / MARMON RIDE CONTROL, WESTAR, HYUNDAI and 3 other brands. The "Popular" part is DEA / MARMON RIDE CONTROL A7193.