2012 Hyundai Genesis Coupe Engine Parts

This table covers the wear sleeves used to restore a Camshaft seal surface. Read more

One part is listed for the 2012 Hyundai Genesis Coupe — SKF 99139.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Camshaft Seal parts are listed for the 2012 Hyundai Genesis Coupe, from ELRING and SKF.

This group includes ELRING 127610 and SKF 13943.

This table covers the connecting rods between each piston and the crankshaft. Read more

This group shows a single part: HYUNDAI 235102C400.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

7 Connecting Rod Bearing parts for the 2012 Hyundai Genesis Coupe come from 4 brands — KING ENGINE BEARINGS, TOPLINE, ITM ENGINE COMPONENTS and 1 other brand. The "Popular" part is TOPLINE RBHY11.

The High Performance section lists 1 option from KING ENGINE BEARINGS — engineered beyond original-equipment specification. KING ENGINE BEARINGS CR4634XP is listed in this group.

In the Standard Replacement grade, TOPLINE and ITM ENGINE COMPONENTS supply 2 parts: built to original-equipment specification. A representative part number is TOPLINE RBHY11.

4 further parts sit outside the graded sections, with the same engine-level match.

Part numbers include TOPLINE RBHY11, KING ENGINE BEARINGS CR4634XP and ITM ENGINE COMPONENTS 4B2024, among others listed above.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

7 Conversion / Lower Gasket Set parts for the 2012 Hyundai Genesis Coupe come from 5 brands — AJUSA, APEX, ENGINETECH and 2 other brands. The "Popular" part is APEX ACS2093.

Part numbers include APEX ACS2093, AJUSA 54243600 and AJUSA 54179100, among others listed above.

This table covers the crankshafts that turn piston motion into rotation. Read more

2 Crankshaft parts for the 2012 Hyundai Genesis Coupe come from 2 brands — SKP and TOPLINE.

The Economy section lists 1 option from SKP — the catalog's value-priced group. SKP SKES9098 is listed in this group.

Standard Replacement: 1 part, from TOPLINE. A representative part number is TOPLINE CSHY20S.

Part numbers include SKP SKES9098 and TOPLINE CSHY20S.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

8 Crankshaft Main Bearing parts are listed for the 2012 Hyundai Genesis Coupe, from TOPLINE, KING ENGINE BEARINGS, ENGINETECH and 2 other brands. ENGINETECH BC1030 carries the "Popular" badge.

High Performance: 1 part, from KING ENGINE BEARINGS. A representative part number is KING ENGINE BEARINGS MB5771XP.

The Standard Replacement section: 5 options from TOPLINE, ENGINETECH, MAHLE / CLEVITE and 1 other brand. ENGINETECH BC1030 is listed in this group.

2 ungrouped parts are not assigned to a grade, with the same engine-level match.

This group includes ENGINETECH BC1030, KING ENGINE BEARINGS MB5771XP and MAHLE / CLEVITE MS2330A and the remaining parts above.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

8 Crankshaft Repair Sleeve parts are listed for the 2012 Hyundai Genesis Coupe, from WJB / INMOTION PARTS, BCA, NATIONAL and 1 other brand. WJB / INMOTION PARTS WS99166 carries the "Popular" badge.

Listed part numbers: WJB / INMOTION PARTS WS99166, BCA NS99166 and BCA NS99177, plus the other parts above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

40 Crankshaft Seal parts are listed for the 2012 Hyundai Genesis Coupe, from VICTOR REINZ, FEL-PRO, APEX and 13 other brands. BCA NS224200 carries the "Popular" badge. The notes list position, dimensions and spec qualifiers wherever the manufacturer distinguishes between variants.

This table covers the bolts that clamp the cylinder head to the block. Read more

12 Cylinder Head Bolt parts for the 2012 Hyundai Genesis Coupe come from 9 brands — AJUSA, FEL-PRO, APEX and 6 other brands. The "Popular" part is AJUSA 81045900.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

18 Cylinder Head Gasket parts for the 2012 Hyundai Genesis Coupe come from 7 brands — AJUSA, APEX, MAHLE / CLEVITE and 4 other brands. The "Popular" part is FEL-PRO 26416PT.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

7 Cylinder Head Gasket Set parts for the 2012 Hyundai Genesis Coupe come from 4 brands — AJUSA, FEL-PRO, MAHLE / CLEVITE and 1 other brand. The "Popular" part is AJUSA 52349600.

This group includes AJUSA 52349600, APEX AHS13046 and AJUSA 52686900 and the remaining parts above.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

KAT'S HEATERS supplies both parts for the 2012 Hyundai Genesis Coupe. All of them fit every engine offered in the 2012 Genesis Coupe.

This group includes KAT'S HEATERS 11812 and KAT'S HEATERS 28812.

This table covers the Engine covers. Read more

5 Engine Cover parts for the 2012 Hyundai Genesis Coupe come from TECHPRO. The "Popular" part is TECHPRO HY1228150. Every part fits both the 2.0L L4 Turbocharged and the 3.8L V6.

Listed part numbers: TECHPRO HY1228150, TECHPRO HY1228148 and TECHPRO HY1228147, plus the other parts above.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

3 Engine Kit Gasket Set parts for the 2012 Hyundai Genesis Coupe come from AJUSA.

This group includes AJUSA 50423300, AJUSA 50313700 and AJUSA 50608000.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

10 Exhaust Valve parts are listed for the 2012 Hyundai Genesis Coupe, from MELLING, ENGINETECH, QUALCAST and 3 other brands. HYUNDAI 222123C800 carries the "Popular" badge.

This table covers the followers that drive a mechanical fuel pump off the camshaft. Read more

This group shows a single part: WELLS 5T5017.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

10 Harmonic Balancer parts for the 2012 Hyundai Genesis Coupe come from 6 brands — HL MANDO, ATP, DAYCO and 3 other brands. The "Popular" part is HL MANDO 30A5010.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

13 Intake Manifold Gasket parts for the 2012 Hyundai Genesis Coupe come from 5 brands — AJUSA, BECK/ARNLEY, FEL-PRO and 2 other brands. The "Popular" part is FEL-PRO MS97086.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Intake Plenum Gasket parts are listed for the 2012 Hyundai Genesis Coupe, from BECK/ARNLEY and FEL-PRO.

Part numbers include BECK/ARNLEY 0374875 and FEL-PRO MS97407.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

11 Intake Valve parts are listed for the 2012 Hyundai Genesis Coupe, from MELLING, SBI, QUALCAST and 4 other brands. MELLING V3255 carries the "Popular" badge.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

13 Motor Mount parts are listed for the 2012 Hyundai Genesis Coupe, from DEA / MARMON RIDE CONTROL, WESTAR, HYUNDAI and 3 other brands. DEA / MARMON RIDE CONTROL A7193 carries the "Popular" badge.