2013 Hyundai Genesis Coupe Engine Parts

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: ELRING 127610.

This table covers the connecting rods between each piston and the crankshaft. Read more

One part is listed for the 2013 Hyundai Genesis Coupe — TOPLINE CRHY20S.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

7 Connecting Rod Bearing parts are listed for the 2013 Hyundai Genesis Coupe, from KING ENGINE BEARINGS, TOPLINE, ITM ENGINE COMPONENTS and 1 other brand. TOPLINE RBHY11 carries the "Popular" badge.

In the High Performance grade, KING ENGINE BEARINGS supplies 1 part: engineered beyond original-equipment specification. A representative part number is KING ENGINE BEARINGS CR4634XP.

The Standard Replacement section lists 2 options from TOPLINE and ITM ENGINE COMPONENTS — built to original-equipment specification. TOPLINE RBHY11 is listed in this group.

4 ungrouped parts are not assigned to a grade, with the same engine-level match.

Part numbers include TOPLINE RBHY11, KING ENGINE BEARINGS CR4634XP and ITM ENGINE COMPONENTS 4B2024, among others listed above.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

5 Conversion / Lower Gasket Set parts are listed for the 2013 Hyundai Genesis Coupe, from AJUSA and MAHLE / CLEVITE.

Listed part numbers: AJUSA 54243600, AJUSA 54179100 and AJUSA 54349900, plus the other parts above.

This table covers the crankshafts that turn piston motion into rotation. Read more

2 Crankshaft parts are listed for the 2013 Hyundai Genesis Coupe, from SKP and TOPLINE.

In the Economy grade, SKP supplies 1 part: the catalog's value-priced group. A representative part number is SKP SKES9098.

The Standard Replacement section: 1 option from TOPLINE. TOPLINE CSHY20S is listed in this group.

Listed part numbers: SKP SKES9098 and TOPLINE CSHY20S.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

8 Crankshaft Main Bearing parts for the 2013 Hyundai Genesis Coupe come from 5 brands — TOPLINE, KING ENGINE BEARINGS, ENGINETECH and 2 other brands. The "Popular" part is ENGINETECH BC1030.

The High Performance section: 1 option from KING ENGINE BEARINGS. KING ENGINE BEARINGS MB5771XP is listed in this group.

Standard Replacement: 5 parts, from TOPLINE, ENGINETECH, MAHLE / CLEVITE and 1 other brand. A representative part number is ENGINETECH BC1030.

2 further parts sit outside the graded sections, with the same engine-level match.

Part numbers include ENGINETECH BC1030, KING ENGINE BEARINGS MB5771XP and MAHLE / CLEVITE MS2330A, among others listed above.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

8 Crankshaft Repair Sleeve parts for the 2013 Hyundai Genesis Coupe come from 4 brands — WJB / INMOTION PARTS, BCA, NATIONAL and 1 other brand. The "Popular" part is WJB / INMOTION PARTS WS99166.

Listed part numbers: WJB / INMOTION PARTS WS99166, BCA NS99166 and BCA NS99177, plus the other parts above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

41 Crankshaft Seal parts for the 2013 Hyundai Genesis Coupe come from 16 brands — VICTOR REINZ, FEL-PRO, APEX and 13 other brands. The "Popular" part is BCA NS224200. A list this long means Crankshaft Seal applications vary by configuration — the notes carry the qualifiers.

This table covers the bolts that clamp the cylinder head to the block. Read more

12 Cylinder Head Bolt parts are listed for the 2013 Hyundai Genesis Coupe, from FEL-PRO, AJUSA, APEX and 6 other brands. FEL-PRO ES724651 carries the "Popular" badge.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

9 Cylinder Head Gasket parts are listed for the 2013 Hyundai Genesis Coupe, from AJUSA, MAHLE / CLEVITE and APEX. AJUSA 10192500 carries the "Popular" badge.

This group includes AJUSA 10192500, MAHLE / CLEVITE 55453 and AJUSA 10225100 and the remaining parts above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

4 Cylinder Head Gasket Set parts are listed for the 2013 Hyundai Genesis Coupe, from AJUSA and MAHLE / CLEVITE.

Listed part numbers: AJUSA 52465800, AJUSA 52349600 and AJUSA 52686900, plus the other parts above.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

2 Engine Block Heater parts for the 2013 Hyundai Genesis Coupe come from KAT'S HEATERS. Every part fits both the 2.0L L4 Turbocharged and the 3.8L V6.

Listed part numbers: KAT'S HEATERS 11812 and KAT'S HEATERS 28812.

This table covers the Engine covers. Read more

TECHPRO supplies the 4 Engine Cover parts for the 2013 Hyundai Genesis Coupe. All of them fit every engine offered in the 2013 Genesis Coupe.

Part numbers include TECHPRO HY1228148, TECHPRO HY1228147 and TECHPRO HY1228149, among others listed above.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

AJUSA supplies the 3 Engine Kit Gasket Set parts for the 2013 Hyundai Genesis Coupe.

This group includes AJUSA 50423400, AJUSA 50313700 and AJUSA 50608000.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

10 Exhaust Valve parts for the 2013 Hyundai Genesis Coupe come from 6 brands — MELLING, ENGINETECH, QUALCAST and 3 other brands. The "Popular" part is HYUNDAI 222123C800.

This table covers the followers that drive a mechanical fuel pump off the camshaft. Read more

2 Fuel Pump Camshaft Follower parts are listed for the 2013 Hyundai Genesis Coupe, from STANDARD MOTOR PRODUCTS and WELLS.

Listed part numbers: STANDARD MOTOR PRODUCTS GDF401 and WELLS 5T5017.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

10 Harmonic Balancer parts are listed for the 2013 Hyundai Genesis Coupe, from HL MANDO, ATP, DAYCO and 3 other brands. HL MANDO 30A5010 carries the "Popular" badge.

This table covers the high-pressure oil pumps that fire HEUI diesel injectors. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

This group shows a single part: MARELLI PHP031.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

8 Intake Manifold Gasket parts are listed for the 2013 Hyundai Genesis Coupe, from AJUSA, FEL-PRO, AUTO 7 and 1 other brand. AJUSA 13273700 carries the "Popular" badge.

This group includes AJUSA 13273700, AJUSA 13240400 and AJUSA 13240500 and the remaining parts above.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: FEL-PRO MS97407.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

11 Intake Valve parts for the 2013 Hyundai Genesis Coupe come from 7 brands — MELLING, SBI, QUALCAST and 4 other brands. The "Popular" part is MELLING V3255.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

10 Motor Mount parts for the 2013 Hyundai Genesis Coupe come from 6 brands — DEA / MARMON RIDE CONTROL, HYUNDAI, ANCHOR and 3 other brands. The "Popular" part is ANCHOR 9787. 3 parts fit every engine; the other 7 are engine-specific.

This table covers the Motor Mount kits. Read more

This group shows a single part: ANCHOR 301188.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

90 Oil parts for the 2013 Hyundai Genesis Coupe come from 7 brands — VALVOLINE, LIQUI MOLY, MOBIL and 4 other brands. The "Popular" part is MOBIL 125195. They are grouped as Conventional, Full Synthetic, Heavy Duty / Diesel, High Mileage (>75,000 Miles), Racing and Synthetic Blend, with Full Synthetic the largest group at 57 parts from LIQUI MOLY, VALVOLINE, MOBIL and 3 other brands.

This table covers the heat exchangers that cool engine oil. Typical signs include oil at the cooler fittings, or coolant that looks like a milkshake. Pressure-test both circuits after a cooler swap — a leak here mixes oil and coolant. Read more

3 Oil Cooler parts for the 2013 Hyundai Genesis Coupe come from 3 brands — AUTOTECNICA, SKP and STANDARD MOTOR PRODUCTS.

Part numbers include AUTOTECNICA HY1421717, SKP SK117107 and STANDARD MOTOR PRODUCTS OCK28.

This table covers the Oil Cooler Mounting kits. Read more

HAYDEN supplies both parts for the 2013 Hyundai Genesis Coupe.

Part numbers include HAYDEN 238 and HAYDEN 153.

This table covers the Oil Dipstick tubes. Read more

This group shows a single part: AUTOTECNICA HY1419612.

This table covers the drain plugs in the oil pan. Read more

6 Oil Drain Plug parts for the 2013 Hyundai Genesis Coupe come from 4 brands — DORMAN, AGS, REIN and 1 other brand. The "Popular" part is DORMAN 090033. Every part fits both the 2.0L L4 Turbocharged and the 3.8L V6.

This group includes DORMAN 090033, DORMAN 090053 and AGS ODP00007 and the remaining parts above.