2012 Hyundai Tucson Automatic Transmission Parts

This table covers the gaskets that seal the Case. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2012 Hyundai Tucson — VAICO V520325.

This table covers the clutch-plate packs inside the transmission or transfer case. Read more

2 Clutch Plate Pack parts for the 2012 Hyundai Tucson come from RAYBESTOS POWERTRAIN. Every part fits both the 2.0L L4 and the 2.4L L4.

In the Friction Plate Pack grade, RAYBESTOS POWERTRAIN supplies 1 part: grouped under the catalog's "Friction Plate Pack" designation — the notes column spells out what sets them apart. A representative part number is RAYBESTOS POWERTRAIN RCP96267.

The Steel Plate Pack section lists 1 option from RAYBESTOS POWERTRAIN — grouped under the catalog's "Steel Plate Pack" designation — the notes column spells out what sets them apart. RAYBESTOS POWERTRAIN STMHYUND06 is listed in this group.

This group includes RAYBESTOS POWERTRAIN RCP96267 and RAYBESTOS POWERTRAIN STMHYUND06.

This table covers the seals at the Extension Housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Extension Housing Seal parts are listed for the 2012 Hyundai Tucson, from NATIONAL and WJB / INMOTION PARTS.

Listed part numbers: NATIONAL 711016 and WJB / INMOTION PARTS WS711016.

This table covers the replacement filters for this application — the table heading and notes say which circuit. Typical signs include restricted flow — long cranking, weak airflow, or dirty fluid after a short interval. Seat the new filter so it cannot bypass, and use the grade the notes call for. Read more

8 Filter parts for the 2012 Hyundai Tucson come from 6 brands — VAICO, RAYBESTOS POWERTRAIN, ATP and 3 other brands. The "Popular" part is ATP B458. Every part fits both the 2.0L L4 and the 2.4L L4.

Part numbers include ATP B458, VAICO V520326 and BECK/ARNLEY 0440402, among others listed above.

This table covers the Fluid Cooler Line hoses. Typical signs include swelling, cracks, a soft spot, or a leak at a clamp. Replace adjacent aged hoses while the system is drained — they share the same heat cycle. Read more

This group shows a single part: SUNSONG 5802163.

This table covers the pans that hold automatic-transmission fluid. Read more

5 Fluid Pan parts are listed for the 2012 Hyundai Tucson, from SKP, DORMAN, HYUNDAI and 2 other brands. SKP SK265856 carries the "Popular" badge. All of them fit every engine offered in the 2012 Tucson.

Listed part numbers: SKP SK265856, DORMAN 265856 and HYUNDAI 452803B811, plus the other parts above.

This table covers the Fluid Pump bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

This group shows a single part: DURA-BOND MIT21T.

This table covers the Fluid temperature sensors. Typical signs include hard cold starts, a fan that never comes on, or a gauge that disagrees with the scan tool. A sensor that reads open or shorted is usually the part; an implausible-but-smooth reading can be wiring. Read more

3 Fluid Temperature Sensor parts for the 2012 Hyundai Tucson come from 3 brands — GPD, STANDARD MOTOR PRODUCTS and WELLS. Every part fits both the 2.0L L4 and the 2.4L L4.

Listed part numbers: GPD 1814541, STANDARD MOTOR PRODUCTS TX300 and WELLS 5S15269.

This table covers the seals at the Manual Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Manual Shaft Seal parts are listed for the 2012 Hyundai Tucson, from NATIONAL and WJB / INMOTION PARTS. All of them fit every engine offered in the 2012 Tucson.

Listed part numbers: NATIONAL 711014 and WJB / INMOTION PARTS WS711014.

This table covers the wear sleeves used to restore a Output Shaft seal surface. Read more

3 Output Shaft Repair Sleeve parts for the 2012 Hyundai Tucson come from 3 brands — BCA, NATIONAL and WJB / INMOTION PARTS. Every part fits both the 2.0L L4 and the 2.4L L4.

Part numbers include BCA NS99145, NATIONAL 99145 and WJB / INMOTION PARTS WS99145.

This table covers the seals at the Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

8 Output Shaft Seal parts for the 2012 Hyundai Tucson come from 3 brands — NATIONAL, HYUNDAI and WJB / INMOTION PARTS. The "Popular" part is NATIONAL 711015. 6 parts fit every engine; the other 2 are engine-specific.

This group includes NATIONAL 711015, NATIONAL 711018 and HYUNDAI 452453B411 and the remaining parts above.

This table covers the Pressure Control (EPC) solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

2 Pressure Control (EPC) Solenoid parts for the 2012 Hyundai Tucson come from 2 brands — STANDARD MOTOR PRODUCTS and WELLS. Every part fits both the 2.0L L4 and the 2.4L L4.

This group includes STANDARD MOTOR PRODUCTS TCS207 and WELLS 2N1275.

This table covers the Shift Interlock solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

This group shows a single part: WELLS 2N1284.

This table covers the Shift solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

4 Shift Solenoid parts are listed for the 2012 Hyundai Tucson, from STANDARD MOTOR PRODUCTS, ACKOJA and HYUNDAI. 3 parts fit every engine; the other 1 is engine-specific.

Part numbers include ACKOJA A52770022, HYUNDAI 463133B600 and STANDARD MOTOR PRODUCTS TCS196, among others listed above.

This table covers the Torque converters. Typical signs include a sulfur smell, rattling substrate, or an efficiency code. Confirm CARB vs Federal certification in the notes before ordering. Read more

This group shows a single part: TC REMANUFACTURING KM10218.

This table covers the seals at the Torque Converter Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Torque Converter Shaft Seal parts are listed for the 2012 Hyundai Tucson, from BCA, JAPANESE OE, NATIONAL and 1 other brand. All of them fit every engine offered in the 2012 Tucson.

Part numbers include BCA NS710615, JAPANESE OE 9031143004 and NATIONAL 710615, among others listed above.

This table covers the automatic-transmission fluids specified for this gearbox. Typical signs include harsh or delayed shifts, fluid that smells burnt, or a shudder at light throttle. Use exactly the specification in the notes. Automatic transmissions are unforgiving of the wrong fluid. Read more

16 Transmission Fluid parts for the 2012 Hyundai Tucson come from 9 brands — VALVOLINE, LIQUI MOLY, PENTOSIN and 6 other brands. The "Popular" part is ACDELCO 109243. 14 parts fit every engine; the other 2 are engine-specific.

In the ATF 64 grade, PENTOSIN supplies 2 parts: grouped under the catalog's "ATF 64" designation — the notes column spells out what sets them apart. A representative part number is PENTOSIN 1058113.

The Dexron section lists 1 option from ACDELCO — grouped under the catalog's "Dexron" designation — the notes column spells out what sets them apart. ACDELCO 109243 is listed in this group.

The Multi-Vehicle section lists 8 options from VALVOLINE, LIQUI MOLY, MOBIL and 1 other brand — grouped under the catalog's "Multi-Vehicle" designation — the notes column spells out what sets them apart. MOBIL 126505 is listed in this group.

The SP-III (SP3) section lists 1 option from IDEMITSU — grouped under the catalog's "SP-III (SP3)" designation — the notes column spells out what sets them apart. IDEMITSU 30040097750 is listed in this group.

In the SP-IV (SP 4) grade, AISIN and IDEMITSU supply 2 parts: grouped under the catalog's "SP-IV (SP 4)" designation — the notes column spells out what sets them apart. A representative part number is AISIN ATFSP4.

The ZF Fluid section lists 1 option from ZF — grouped under the catalog's "ZF Fluid" designation — the notes column spells out what sets them apart. ZF 5961308625 is listed in this group.

1 further part sits outside the graded sections, with the same engine-level match.

This table covers the conditioners and additives used with this transmission fluid. Read more

8 Transmission Fluid Additive parts for the 2012 Hyundai Tucson come from LUBEGARD. The "Popular" part is LUBEGARD 19610. Every part fits both the 2.0L L4 and the 2.4L L4.

Listed part numbers: LUBEGARD 19610, LUBEGARD 60902 and LUBEGARD 19689, plus the other parts above.

This table covers the mounts that hold the transmission to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

5 Transmission Mount parts are listed for the 2012 Hyundai Tucson, from ANCHOR, BECK/ARNLEY, DEA / MARMON RIDE CONTROL and 2 other brands. ANCHOR 9779 carries the "Popular" badge. All of them fit every engine offered in the 2012 Tucson.

Part numbers include ANCHOR 9779, BECK/ARNLEY 1042164 and DEA / MARMON RIDE CONTROL A71009, among others listed above.