2012 Hyundai Tucson Engine Parts

This table covers the camshafts that open the valves. Read more

3 Camshaft parts for the 2012 Hyundai Tucson come from 2 brands — SKP and HYUNDAI. Every part fits both the 2.0L L4 and the 2.4L L4.

Listed part numbers: HYUNDAI 241002G600, SKP SKES1560 and SKP SKES1559.

This table covers the Camshaft plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

This group shows a single part: ELRING 725780.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2012 Hyundai Tucson — ELRING 293946.

This table covers the connecting rods between each piston and the crankshaft. Read more

3 Connecting Rod parts for the 2012 Hyundai Tucson come from 3 brands — ENGINETECH, HYUNDAI and TOPLINE.

Part numbers include ENGINETECH ECR406, HYUNDAI 2351025030 and TOPLINE CRHY11.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

11 Connecting Rod Bearing parts for the 2012 Hyundai Tucson come from 5 brands — KING ENGINE BEARINGS, TOPLINE, ITM ENGINE COMPONENTS and 2 other brands. The "Popular" part is ENGINETECH BB1041.

The High Performance section lists 1 option from KING ENGINE BEARINGS — engineered beyond original-equipment specification. KING ENGINE BEARINGS CR4634XP is listed in this group.

In the Standard Replacement grade, KING ENGINE BEARINGS, ENGINETECH, TOPLINE and 2 other brands supply 6 parts: built to original-equipment specification. A representative part number is ENGINETECH BB1041.

4 further parts sit outside the graded sections, with the same engine-level match.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

6 Conversion / Lower Gasket Set parts for the 2012 Hyundai Tucson come from 6 brands — FEL-PRO, MAHLE / CLEVITE, AJUSA and 3 other brands. The "Popular" part is FEL-PRO CS263331. 1 part fits every engine; the other 5 are engine-specific.

This group includes FEL-PRO CS263331, MAHLE / CLEVITE CS54741 and AJUSA 54179200 and the remaining parts above.

This table covers the crankshafts that turn piston motion into rotation. Read more

2 Crankshaft parts for the 2012 Hyundai Tucson come from 2 brands — ENGINETECH and TOPLINE.

Part numbers include ENGINETECH 884100 and TOPLINE CSHY11.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

13 Crankshaft Main Bearing parts are listed for the 2012 Hyundai Tucson, from TOPLINE, KING ENGINE BEARINGS, ENGINETECH and 2 other brands. ENGINETECH BC1030 carries the "Popular" badge.

High Performance: 1 part, from KING ENGINE BEARINGS. A representative part number is KING ENGINE BEARINGS MB5771XP.

The Standard Replacement section: 6 options from TOPLINE, ENGINETECH, KING ENGINE BEARINGS and 2 other brands. ENGINETECH BC1030 is listed in this group.

6 ungrouped parts are not assigned to a grade, with the same engine-level match.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

6 Crankshaft Repair Sleeve parts are listed for the 2012 Hyundai Tucson, from WJB / INMOTION PARTS, BCA, NATIONAL and 2 other brands. WJB / INMOTION PARTS WS99166 carries the "Popular" badge. 5 parts fit every engine; the other 1 is engine-specific.

Part numbers include WJB / INMOTION PARTS WS99166, WJB / INMOTION PARTS WS99333 and BCA NS99166, among others listed above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

27 Crankshaft Seal parts are listed for the 2012 Hyundai Tucson, from APEX, SCHAEFFLER, VICTOR REINZ and 13 other brands. BCA NS224200 carries the "Popular" badge. The notes list position, dimensions and spec qualifiers wherever the manufacturer distinguishes between variants.

This table covers the bolts that clamp the cylinder head to the block. Read more

8 Cylinder Head Bolt parts for the 2012 Hyundai Tucson come from 8 brands — AJUSA, ENGINETECH, FEL-PRO and 5 other brands. The "Popular" part is AJUSA 81045900. 6 parts fit every engine; the other 2 are engine-specific.

Part numbers include AJUSA 81045900, ENGINETECH HB267 and FEL-PRO ES724651, among others listed above.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

12 Cylinder Head Gasket parts for the 2012 Hyundai Tucson come from 8 brands — APEX, FEL-PRO, MAHLE / CLEVITE and 5 other brands. The "Popular" part is AJUSA 10198000.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

10 Cylinder Head Gasket Set parts for the 2012 Hyundai Tucson come from 8 brands — APEX, MAHLE / CLEVITE, ENGINETECH and 5 other brands. The "Popular" part is ENGINETECH HY24HSE.

This table covers the Cylinder Head Spacer shims. Read more

This group shows a single part: SBI 2302206.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

KAT'S HEATERS supplies both parts for the 2012 Hyundai Tucson.

Listed part numbers: KAT'S HEATERS 11812 and KAT'S HEATERS 28812.

This table covers the Engine covers. Read more

4 Engine Cover parts for the 2012 Hyundai Tucson come from 2 brands — TECHPRO and HYUNDAI. 3 parts fit every engine; the other 1 is engine-specific.

Listed part numbers: HYUNDAI 292402G000, TECHPRO HY1228155 and TECHPRO HY1228156, plus the other parts above.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

7 Engine Kit Gasket Set parts for the 2012 Hyundai Tucson come from 6 brands — TOPLINE, AJUSA, ELRING and 3 other brands.

Listed part numbers: AJUSA 50313900, ELRING 592900 and ENGINETECH HY24K5, plus the other parts above.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

7 Exhaust Valve parts are listed for the 2012 Hyundai Tucson, from SBI, MELLING, ENGINETECH and 3 other brands. MELLING V3256 carries the "Popular" badge. 3 parts fit every engine; the other 4 are engine-specific.

Listed part numbers: MELLING V3256, SBI 13256 and ENGINETECH EM4435, plus the other parts above.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

8 Harmonic Balancer parts for the 2012 Hyundai Tucson come from 6 brands — SKP, DORMAN, ATP and 3 other brands. The "Popular" part is SKP SK594341. 7 parts fit every engine; the other 1 is engine-specific.

The Economy section lists 2 options from SKP — the catalog's value-priced group. SKP SK594341 is listed in this group.

Standard Replacement: 4 parts, from DORMAN, ATP and DAYCO. A representative part number is DORMAN 594341.

2 further parts sit outside the graded sections, with the same engine-level match.

Listed part numbers: SKP SK594341, SKP SK594408 and DORMAN 594341, plus the other parts above.

This table covers the Intake manifolds. Typical signs include an exhaust tick, a vacuum leak, or a gasket that has burned through. Replace the gaskets and hardware; a warped flange will leak with a new gasket alone. Read more

One part is listed for the 2012 Hyundai Tucson — HYUNDAI 283242G000.

This table covers the Intake Manifold actuators. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

4 Intake Manifold Actuator parts for the 2012 Hyundai Tucson come from 3 brands — SKP, DORMAN and STANDARD MOTOR PRODUCTS. 2 parts fit every engine; the other 2 are engine-specific.

Part numbers include DORMAN 911922, SKP SK283202 and SKP SK911922, among others listed above.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

13 Intake Manifold Gasket parts for the 2012 Hyundai Tucson come from 8 brands — HYUNDAI, VICTOR REINZ, BECK/ARNLEY and 5 other brands. The "Popular" part is APEX AMS2922. 11 parts fit every engine; the other 2 are engine-specific.

This table covers the Intake Manifold Runner Control Valve solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

5 Intake Manifold Runner Control Valve / Solenoid parts for the 2012 Hyundai Tucson come from 5 brands — SKP, ACKOJA, DORMAN and 2 other brands. The "Popular" part is SKP SK913182. Every part fits both the 2.0L L4 and the 2.4L L4.

Part numbers include SKP SK913182, ACKOJA A52630011 and DORMAN 911934, among others listed above.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

AJUSA supplies both parts for the 2012 Hyundai Tucson.

Listed part numbers: AJUSA 13240100 and AJUSA 13240200.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

8 Intake Valve parts are listed for the 2012 Hyundai Tucson, from SBI, QUALCAST, MELLING and 3 other brands. MELLING V3255 carries the "Popular" badge. 3 parts fit every engine; the other 5 are engine-specific.

Listed part numbers: MELLING V3255, SBI 13255 and ENGINETECH IM4436, plus the other parts above.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

6 Motor Mount parts are listed for the 2012 Hyundai Tucson, from ANCHOR, HYUNDAI, BECK/ARNLEY and 3 other brands. ANCHOR 9905 carries the "Popular" badge. 5 parts fit every engine; the other 1 is engine-specific.

Part numbers include ANCHOR 9905, HYUNDAI 218102S200 and BECK/ARNLEY 1042166, among others listed above.

This table covers the Motor Mount kits. Read more

One part is listed for the 2012 Hyundai Tucson — ANCHOR 300187.