2018 Hyundai Kona Engine Parts

This table covers the connecting rods between each piston and the crankshaft. Read more

TOPLINE supplies both parts for the 2018 Hyundai Kona.

Part numbers include TOPLINE CRHY22T and TOPLINE CRHY23L.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

4 Connecting Rod Bearing parts are listed for the 2018 Hyundai Kona, from ENGINETECH and TOPLINE.

This group includes ENGINETECH BB1430, ENGINETECH BB1100 and TOPLINE RBHY22T and the remaining parts above.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

11 Conversion / Lower Gasket Set parts are listed for the 2018 Hyundai Kona, from APEX, ENGINETECH, FEL-PRO and 4 other brands. APEX ACS13028 carries the "Popular" badge.

This table covers the crankshafts that turn piston motion into rotation. Read more

TOPLINE supplies both parts for the 2018 Hyundai Kona.

Part numbers include TOPLINE CSHY22T and TOPLINE CSHY23S.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

7 Crankshaft Main Bearing parts for the 2018 Hyundai Kona come from 3 brands — TOPLINE, ENGINETECH and ITM ENGINE COMPONENTS.

Part numbers include ENGINETECH BC1017, ENGINETECH BC1101 and ITM ENGINE COMPONENTS 5M9386, among others listed above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

25 Crankshaft Seal parts for the 2018 Hyundai Kona come from 7 brands — ELRING, VICTOR REINZ, FEL-PRO and 4 other brands. The "Popular" part is ELRING 902760.

This table covers the bolts that clamp the cylinder head to the block. Read more

10 Cylinder Head Bolt parts are listed for the 2018 Hyundai Kona, from AJUSA, ENGINETECH, FEL-PRO and 3 other brands. AJUSA 81061400 carries the "Popular" badge.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

9 Cylinder Head Gasket parts are listed for the 2018 Hyundai Kona, from APEX, AJUSA, MAHLE / CLEVITE and 3 other brands. APEX AHG1326 carries the "Popular" badge.

Part numbers include APEX AHG1326, AJUSA 10239000 and AJUSA 10252000, among others listed above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

10 Cylinder Head Gasket Set parts are listed for the 2018 Hyundai Kona, from ENGINETECH, AJUSA, MAHLE / CLEVITE and 3 other brands. ENGINETECH HY16HSE carries the "Popular" badge.

This table covers the Engine covers. Read more

3 Engine Cover parts are listed for the 2018 Hyundai Kona, from TECHPRO and VARIOUS MFR. 1 part fits every engine; the other 2 are engine-specific.

Part numbers include TECHPRO HY1228199 and TECHPRO HY1228200, among others listed above.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

4 Engine Kit Gasket Set parts are listed for the 2018 Hyundai Kona, from AJUSA and TOPLINE.

This group includes AJUSA 50527000, AJUSA 50593300 and TOPLINE CGSHY22ST and the remaining parts above.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

4 Exhaust Valve parts for the 2018 Hyundai Kona come from 3 brands — TOPLINE, HYUNDAI and MELLING.

This group includes HYUNDAI 222122E000, MELLING V5571 and TOPLINE EVHY22 and the remaining parts above.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

9 Harmonic Balancer parts are listed for the 2018 Hyundai Kona, from HYUNDAI, ATP, DAYCO and 3 other brands. HYUNDAI 231242E000 carries the "Popular" badge.

Listed part numbers: HYUNDAI 231242E000, ATP 102474 and ATP 102358, plus the other parts above.

This table covers the Intake Manifold actuators. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

One part is listed for the 2018 Hyundai Kona — STANDARD MOTOR PRODUCTS IMA145.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

9 Intake Manifold Gasket parts are listed for the 2018 Hyundai Kona, from AJUSA, MAHLE / CLEVITE, APEX and 4 other brands. APEX AMS13140 carries the "Popular" badge.

Part numbers include APEX AMS13140, FEL-PRO MS97228 and AJUSA 13275000, among others listed above.

This table covers the Intake Manifold Runner Control Valve solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

One part is listed for the 2018 Hyundai Kona — STANDARD MOTOR PRODUCTS IMRC23.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

8 Intake Valve parts for the 2018 Hyundai Kona come from 5 brands — ENGINETECH, MELLING, TOPLINE and 2 other brands.

This group includes ENGINETECH V2200, ENGINETECH V1794 and HYUNDAI 222112E400 and the remaining parts above.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

5 Motor Mount parts for the 2018 Hyundai Kona come from 4 brands — DEA / MARMON RIDE CONTROL, ANCHOR, PIONEER and 1 other brand. 3 parts fit every engine; the other 2 are engine-specific.

Listed part numbers: ANCHOR 10029, DEA / MARMON RIDE CONTROL A71223 and DEA / MARMON RIDE CONTROL A71125, plus the other parts above.

This table covers the Motor Mount kits. Read more

2 Motor Mount Kit parts for the 2018 Hyundai Kona come from ANCHOR.

Listed part numbers: ANCHOR 300735 and ANCHOR 300736.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

132 Oil parts for the 2018 Hyundai Kona come from 7 brands — VALVOLINE, LIQUI MOLY, MOBIL and 4 other brands. The "Popular" part is MOBIL 125195. Grades run from Conventional through Synthetic Blend; Full Synthetic is the most populated section, led by LIQUI MOLY, VALVOLINE, MOBIL and 3 other brands.

This table covers the heat exchangers that cool engine oil. Typical signs include oil at the cooler fittings, or coolant that looks like a milkshake. Pressure-test both circuits after a cooler swap — a leak here mixes oil and coolant. Read more

5 Oil Cooler parts for the 2018 Hyundai Kona come from 5 brands — AUTOTECNICA, DORMAN, HYUNDAI and 2 other brands. The "Popular" part is AUTOTECNICA HY1419308. 1 part fits every engine; the other 4 are engine-specific.

Listed part numbers: AUTOTECNICA HY1419308, DORMAN 918908 and HYUNDAI 264102B740, plus the other parts above.

This table covers the Oil Dipstick tubes. Read more

This group shows a single part: DORMAN 917437.