2025 Hyundai Kona Engine Parts

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Crankshaft Seal parts for the 2025 Hyundai Kona come from 2 brands — AJUSA and FEL-PRO.

Listed part numbers: AJUSA 15056500 and FEL-PRO BS40740.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2025 Hyundai Kona — FEL-PRO 26925PT.

This table covers the Engine covers. Read more

3 Engine Cover parts are listed for the 2025 Hyundai Kona, from TECHPRO and VARIOUS MFR.

Part numbers include TECHPRO HY1228227 and TECHPRO HY1228226, among others listed above.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

One part is listed for the 2025 Hyundai Kona — HL MANDO 30A5024.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

This group shows a single part: ANCHOR 10294.

This table covers the Motor Mount kits. Read more

This group shows a single part: ANCHOR 301020.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

36 Oil parts for the 2025 Hyundai Kona come from 6 brands — VALVOLINE, LIQUI MOLY, MOBIL and 3 other brands. The "Popular" part is LIQUI MOLY 22044. Full Synthetic and High Mileage (>75,000 Miles) are all represented, and Full Synthetic alone accounts for 29 parts.

This table covers the heat exchangers that cool engine oil. Typical signs include oil at the cooler fittings, or coolant that looks like a milkshake. Pressure-test both circuits after a cooler swap — a leak here mixes oil and coolant. Read more

This group shows a single part: NISSENS 91569.

This table covers the drain plugs in the oil pan. Read more

3 Oil Drain Plug parts for the 2025 Hyundai Kona come from 2 brands — DORMAN and REIN.

Listed part numbers: DORMAN 090033, DORMAN 090053 and REIN HWU0110.

This table covers the caps on the oil filler neck. Read more

2 Oil Filler Cap parts for the 2025 Hyundai Kona come from MOTORAD.

This group includes MOTORAD MO151 and MOTORAD MO223.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

17 Oil Filter parts for the 2025 Hyundai Kona come from 10 brands — PRO-TEC, CHAMP / LUBER-FINER, FVP and 7 other brands. The "Popular" part is PRO-TEC PXL10473.

The Economy section lists 6 options from PRO-TEC, CHAMP / LUBER-FINER and FVP — the catalog's value-priced group. PRO-TEC PXL10473 is listed in this group.

In the Standard Replacement grade, VARIOUS MFR, WIX, BECK/ARNLEY and 4 other brands supply 11 parts: built to original-equipment specification. A representative part number is VARIOUS MFR PO99602EX.

This table covers the Oil Filter covers. Read more

3 Oil Filter Cover parts are listed for the 2025 Hyundai Kona, from MOTORAD and HYUNDAI.

Part numbers include HYUNDAI 263152J000, MOTORAD MO387 and MOTORAD MO371.

This table covers the guides and dampers that keep the timing chain on its path. Read more

5 Timing Chain Guide / Damper parts are listed for the 2025 Hyundai Kona, from PREFERRED COMPONENTS INC and MELLING. MELLING BG5761 carries the "Popular" badge.

Part numbers include MELLING BG5761, MELLING BT5760 and PREFERRED COMPONENTS INC R76293, among others listed above.

This table covers the Torque Strut mounts. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

One part is listed for the 2025 Hyundai Kona — ANCHOR 10136.

This table covers the Turbocharger Coolant lines. Typical signs include a wet fitting, a rusted pipe, or a pressure loss in this circuit. Flare or thread the new line the way the notes specify; a kinked replacement will fail early. Read more

This group shows a single part: SUNSONG 5804166.

This table covers the keepers that lock each valve-spring retainer to the stem. Read more

One part is listed for the 2025 Hyundai Kona — MELLING VL1060.

This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

2 Variable Valve Timing (VVT) Solenoid / Actuator parts for the 2025 Hyundai Kona come from HYUNDAI.

This group includes HYUNDAI 2435508000 and HYUNDAI 243572M000.

This table covers the cam phaser sprockets used by the variable-valve-timing system. Read more

This group shows a single part: HYUNDAI 243502M800.