2019 Hyundai Kona Engine Parts

This table covers the connecting rods between each piston and the crankshaft. Read more

This group shows a single part: TOPLINE CRHY23L.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

2 Connecting Rod Bearing parts for the 2019 Hyundai Kona come from 2 brands — ENGINETECH and TOPLINE.

This group includes ENGINETECH BB1100 and TOPLINE RBHY23.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

6 Conversion / Lower Gasket Set parts for the 2019 Hyundai Kona come from 6 brands — APEX, FEL-PRO, AJUSA and 3 other brands. The "Popular" part is APEX ACS13028.

Listed part numbers: APEX ACS13028, FEL-PRO CS26561 and AJUSA 54245200, plus the other parts above.

This table covers the crankshafts that turn piston motion into rotation. Read more

This group shows a single part: TOPLINE CSHY23S.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

3 Crankshaft Main Bearing parts are listed for the 2019 Hyundai Kona, from TOPLINE and ENGINETECH.

Listed part numbers: ENGINETECH BC1101, TOPLINE TWHY23 and TOPLINE MBHY23L.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

4 Crankshaft Repair Sleeve parts are listed for the 2019 Hyundai Kona, from WJB / INMOTION PARTS, BCA and NATIONAL.

Part numbers include BCA NS99157, NATIONAL 99157 and WJB / INMOTION PARTS WS99157, among others listed above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

15 Crankshaft Seal parts are listed for the 2019 Hyundai Kona, from FEL-PRO, NATIONAL, APEX and 6 other brands. FEL-PRO BS40742 carries the "Popular" badge.

This table covers the bolts that clamp the cylinder head to the block. Read more

5 Cylinder Head Bolt parts for the 2019 Hyundai Kona come from 5 brands — ENGINETECH, AJUSA, FEL-PRO and 2 other brands. The "Popular" part is ENGINETECH HB307.

Part numbers include ENGINETECH HB307, AJUSA 81066700 and FEL-PRO ES73257, among others listed above.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Cylinder Head Gasket parts for the 2019 Hyundai Kona come from 4 brands — AJUSA, APEX, FEL-PRO and 1 other brand.

This group includes AJUSA 10252000, APEX AHG1427 and FEL-PRO 26841PT and the remaining parts above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

5 Cylinder Head Gasket Set parts for the 2019 Hyundai Kona come from 4 brands — ENGINETECH, AJUSA, MAHLE / CLEVITE and 1 other brand. The "Popular" part is ENGINETECH HY20HSE.

Part numbers include ENGINETECH HY20HSE, AJUSA 52669500 and ENGINETECH HY20HSG, among others listed above.

This table covers the Engine covers. Read more

3 Engine Cover parts for the 2019 Hyundai Kona come from 2 brands — TECHPRO and VARIOUS MFR.

Listed part numbers: TECHPRO HY1228200 and TECHPRO HY1228216, plus the other parts above.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

2 Engine Kit Gasket Set parts for the 2019 Hyundai Kona come from 2 brands — AJUSA and TOPLINE.

Listed part numbers: AJUSA 50593300 and TOPLINE CGSHY23N.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

3 Exhaust Valve parts are listed for the 2019 Hyundai Kona, from HYUNDAI, MELLING and TOPLINE.

Part numbers include HYUNDAI 222122E000, MELLING V5571 and TOPLINE EVHY23.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

5 Harmonic Balancer parts for the 2019 Hyundai Kona come from 5 brands — HYUNDAI, ATP, DAYCO and 2 other brands. The "Popular" part is HYUNDAI 231242E000.

Part numbers include HYUNDAI 231242E000, ATP 102358 and DAYCO PB1762N, among others listed above.

This table covers the Intake Manifold actuators. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS IMA145.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Intake Manifold Gasket parts for the 2019 Hyundai Kona come from 2 brands — AJUSA and MAHLE / CLEVITE.

Listed part numbers: AJUSA 13351600 and MAHLE / CLEVITE MS20453.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

4 Intake Valve parts are listed for the 2019 Hyundai Kona, from ENGINETECH, HYUNDAI, MELLING and 1 other brand.

This group includes ENGINETECH V1794, HYUNDAI 222112E400 and MELLING V5565 and the remaining parts above.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

4 Motor Mount parts are listed for the 2019 Hyundai Kona, from ANCHOR, DEA / MARMON RIDE CONTROL, PIONEER and 1 other brand.

Listed part numbers: ANCHOR 10029, DEA / MARMON RIDE CONTROL A71125 and PIONEER 610029, plus the other parts above.

This table covers the Motor Mount kits. Read more

One part is listed for the 2019 Hyundai Kona — ANCHOR 300736.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

115 Oil parts are listed for the 2019 Hyundai Kona, from VALVOLINE, LIQUI MOLY, MOBIL and 4 other brands. MOBIL 125195 carries the "Popular" badge. Conventional, Full Synthetic, High Mileage (>75,000 Miles) and Synthetic Blend are all represented, and Full Synthetic alone accounts for 69 parts.

This table covers the heat exchangers that cool engine oil. Typical signs include oil at the cooler fittings, or coolant that looks like a milkshake. Pressure-test both circuits after a cooler swap — a leak here mixes oil and coolant. Read more

2 Oil Cooler parts are listed for the 2019 Hyundai Kona, from AUTOTECNICA and STANDARD MOTOR PRODUCTS.

Listed part numbers: AUTOTECNICA HY1421718 and STANDARD MOTOR PRODUCTS OCK29.

This table covers the drain plugs in the oil pan. Read more

6 Oil Drain Plug parts are listed for the 2019 Hyundai Kona, from DORMAN, AGS, REIN and 1 other brand. DORMAN 090033 carries the "Popular" badge.

Part numbers include DORMAN 090033, DORMAN 090053 and AGS ODP00007, among others listed above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Oil Drain Plug Gasket parts for the 2019 Hyundai Kona come from 4 brands — DORMAN, AJUSA, FEL-PRO and 1 other brand. The "Popular" part is DORMAN 095147.

Listed part numbers: DORMAN 095147, AJUSA 22007100 and DORMAN 995147CD, plus the other parts above.

This table covers the caps on the oil filler neck. Read more

4 Oil Filler Cap parts are listed for the 2019 Hyundai Kona, from CALORSTAT, GATES, MOTORAD and 1 other brand.

Listed part numbers: CALORSTAT OC2331, GATES 31083 and MOTORAD MO151, plus the other parts above.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

19 Oil Filter parts are listed for the 2019 Hyundai Kona, from BOSCH, VARIOUS MFR, WIX and 12 other brands. WIX 51334XP carries the "Popular" badge.

In the Economy grade, BOSCH, FRAM, FVP and 2 other brands supply 5 parts: the catalog's value-priced group. A representative part number is BOSCH 72228WS.

In the High Performance / Heavy Duty grade, WIX and MOBIL supply 2 parts: grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. A representative part number is WIX 51334XP.

The Standard Replacement section lists 12 options from ACDELCO, BOSCH, DENSO and 8 other brands — built to original-equipment specification. BOSCH 3312 is listed in this group.

This table covers the oil pans that hold the engine's oil sump. Read more

3 Oil Pan parts for the 2019 Hyundai Kona come from 3 brands — DORMAN, SKP and SPECTRA PREMIUM.

Part numbers include DORMAN 264276, SKP SKHYP32A and SPECTRA PREMIUM HYP32A.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Oil Pan Gasket parts are listed for the 2019 Hyundai Kona, from ELRING and VICTOR REINZ.

Listed part numbers: ELRING 816150 and VICTOR REINZ 703141410.

This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

3 Oil Pump parts are listed for the 2019 Hyundai Kona, from ENGINETECH, MELLING and TOPLINE.

Part numbers include ENGINETECH EP214, MELLING M574 and TOPLINE OPHY23VK.

This table covers the pistons that travel in each cylinder. Typical signs include knock, blow-by, or a cylinder that will not hold compression. Piston work is a short-block job. Match bore, pin and ring pack in the notes — not the photo. Read more

This group shows a single part: TOPLINE PAHY23V.

This table covers the Piston Pin bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

2 Piston Pin Bushing parts are listed for the 2019 Hyundai Kona, from ENGINETECH and TOPLINE.

This group includes ENGINETECH EB0284 and TOPLINE PBHY23.

This table covers the rings that seal each piston to the cylinder wall. Read more

2 Piston Ring parts for the 2019 Hyundai Kona come from 2 brands — ENGINETECH and TOPLINE.

In the Premium grade, ENGINETECH supplies 1 part: a step above OE specification in materials, tolerances or warranty terms. A representative part number is ENGINETECH C31894.

Standard Replacement: 1 part, from TOPLINE. A representative part number is TOPLINE RSHY23.

Part numbers include ENGINETECH C31894 and TOPLINE RSHY23.

This table covers the Thrust washers. Read more

One part is listed for the 2019 Hyundai Kona — ENGINETECH TW1121.

This table covers the timing chains that keep the cams in time with the crank. Read more

4 Timing Chain parts for the 2019 Hyundai Kona come from 4 brands — CLOYES, HYUNDAI, MELLING and 1 other brand.

Part numbers include CLOYES C515, HYUNDAI 243212E010 and MELLING 515, among others listed above.

This table covers kits that group a timing chain with the related tensioners and guides. Read more

6 Timing Chain & Component Kit parts are listed for the 2019 Hyundai Kona, from S.A. GEAR, CLOYES, ENGINETECH and 2 other brands. S.A. GEAR 76307SV carries the "Popular" badge.

Economy: 2 parts, from S.A. GEAR. A representative part number is S.A. GEAR 76307SV.

The Standard Replacement section: 4 options from CLOYES, ENGINETECH, INA and 1 other brand. CLOYES 90515SAX is listed in this group.

This group includes S.A. GEAR 76307SV, S.A. GEAR 76307S and CLOYES 90515SAX and the remaining parts above.

This table covers the guides and dampers that keep the timing chain on its path. Read more

9 Timing Chain Guide / Damper parts for the 2019 Hyundai Kona come from 4 brands — PREFERRED COMPONENTS INC, S.A. GEAR, CLOYES and 1 other brand. The "Popular" part is S.A. GEAR 91191.

This group includes S.A. GEAR 91191, S.A. GEAR 71141 and CLOYES 95760 and the remaining parts above.

This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

5 Timing Chain Tensioner parts are listed for the 2019 Hyundai Kona, from HYUNDAI, CLOYES, MELLING and 2 other brands. HYUNDAI 244102E000 carries the "Popular" badge.

This group includes HYUNDAI 244102E000, CLOYES 95759 and MELLING BT5759 and the remaining parts above.

This table covers the Timing covers. Read more

3 Timing Cover parts for the 2019 Hyundai Kona come from 3 brands — ACKOJA, HYUNDAI and TOPLINE.

This group includes ACKOJA A520552, HYUNDAI 213502E740 and TOPLINE TCHY23V.

This table covers the wear sleeves used to restore a Timing Cover seal surface. Read more

One part is listed for the 2019 Hyundai Kona — SKF 99153.

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Timing Cover Seal parts are listed for the 2019 Hyundai Kona, from MAHLE / CLEVITE and SKF.

Part numbers include MAHLE / CLEVITE 68021 and SKF 15957.