2007 Jeep Commander Engine Parts

This table covers the Auxiliary Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

One part is listed for the 2007 Jeep Commander — MAHLE / CLEVITE SH1997S.

This table covers the Balance shafts. Read more

MOPAR supplies both parts for the 2007 Jeep Commander.

Listed part numbers: MOPAR 53020818 and MOPAR 53021298AB.

This table covers the Balance Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

One part is listed for the 2007 Jeep Commander — ENGINETECH CC485.

This table covers the Balance Shaft sprockets. Read more

2 Balance Shaft Sprocket parts for the 2007 Jeep Commander come from PREFERRED COMPONENTS INC.

Part numbers include PREFERRED COMPONENTS INC G57017 and PREFERRED COMPONENTS INC G57018.

This table covers the camshafts that open the valves. Read more

14 Camshaft parts for the 2007 Jeep Commander come from 3 brands — MELLING, SKP and ENGINETECH. The "Popular" part is ENGINETECH ES2065.

The High Performance section lists 4 options from MELLING — engineered beyond original-equipment specification. MELLING 23107 is listed in this group.

In the Standard Replacement grade, ENGINETECH and MELLING supply 2 parts: built to original-equipment specification. A representative part number is ENGINETECH ES2065.

8 further parts sit outside the graded sections, with the same engine-level match.

This table covers the Camshaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

8 Camshaft Bearing parts for the 2007 Jeep Commander come from 5 brands — ENGINETECH, KING ENGINE BEARINGS, DURA-BOND and 2 other brands. The "Popular" part is ENGINETECH CC484.

This group includes ENGINETECH CC484, ENGINETECH CC484G and DURA-BOND PD31B and the remaining parts above.

This table covers the Camshaft hardware kits. Read more

This group shows a single part: ENGINETECH HK121.

This table covers the Camshaft plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

2 Camshaft Plug parts for the 2007 Jeep Commander come from 2 brands — MELLING and MOPAR.

Part numbers include MELLING MEP334 and MOPAR 6507663AA.

This table covers the Circular / Semi-Circular plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

One part is listed for the 2007 Jeep Commander — ELRING B16450.

This table covers the connecting rods between each piston and the crankshaft. Read more

4 Connecting Rod parts for the 2007 Jeep Commander come from ENGINETECH.

Part numbers include ENGINETECH ECR111, ENGINETECH ECR109 and ENGINETECH ECR112, among others listed above.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

31 Connecting Rod Bearing parts for the 2007 Jeep Commander come from 4 brands — MAHLE / CLEVITE, ENGINETECH, KING ENGINE BEARINGS and 1 other brand. The "Popular" part is ENGINETECH BB111J. High Performance and Standard Replacement are all represented, and Standard Replacement alone accounts for 11 parts.

This table covers the Connecting Rod bolts. Read more

MOPAR supplies both parts for the 2007 Jeep Commander.

This group includes MOPAR 6503928 and MOPAR 6506335AA.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

26 Conversion / Lower Gasket Set parts for the 2007 Jeep Commander come from 10 brands — APEX, ENGINETECH, FEL-PRO and 7 other brands. The "Popular" part is APEX ACS2065. A list this long means Conversion / Lower Gasket Set applications vary by configuration — the notes carry the qualifiers.

This table covers the crankshafts that turn piston motion into rotation. Read more

4 Crankshaft parts for the 2007 Jeep Commander come from 2 brands — ENGINETECH and MOPAR.

Listed part numbers: ENGINETECH 253600, ENGINETECH 139200 and ENGINETECH 139700, plus the other parts above.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

15 Crankshaft Main Bearing parts are listed for the 2007 Jeep Commander, from MAHLE / CLEVITE, ENGINETECH, SEALED POWER and 1 other brand. ENGINETECH BC115J carries the "Popular" badge.

High Performance: 2 parts, from MAHLE / CLEVITE. A representative part number is MAHLE / CLEVITE MS2220H.

The Standard Replacement section: 4 options from MAHLE / CLEVITE, ENGINETECH and SEALED POWER. ENGINETECH BC115J is listed in this group.

9 ungrouped parts are not assigned to a grade, with the same engine-level match.

This table covers the Crankshaft Main Bearing Cap bolts. Read more

This group shows a single part: ARP 2445400.

This table covers the wear sleeves used to restore a Crankshaft Main Bearing seal surface. Read more

This group shows a single part: VICTOR REINZ 711347800.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

5 Crankshaft Repair Sleeve parts are listed for the 2007 Jeep Commander, from WJB / INMOTION PARTS, FEL-PRO, MAHLE / CLEVITE and 1 other brand. WJB / INMOTION PARTS WS99181 carries the "Popular" badge. 2 parts fit every engine; the other 3 are engine-specific.

This group includes WJB / INMOTION PARTS WS99181, FEL-PRO 16230 and MAHLE / CLEVITE A351 and the remaining parts above.

This table covers the Crankshaft Repair Sleeve tools. This is a service tool, not a wear part — match the application in the notes. Read more

2 Crankshaft Repair Sleeve Tool parts are listed for the 2007 Jeep Commander, from FEL-PRO and VICTOR REINZ. All of them fit every engine offered in the 2007 Commander.

Listed part numbers: FEL-PRO 16328 and VICTOR REINZ 711620300.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

42 Crankshaft Seal parts are listed for the 2007 Jeep Commander, from NATIONAL, ELRING, APEX and 12 other brands. APEX ATC2751 carries the "Popular" badge. The notes list position, dimensions and spec qualifiers wherever the manufacturer distinguishes between variants.

This table covers the gaskets that seal the Crankshaft Seal. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: ELRING 907600.

This table covers the Cylinder Deactivation solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

5 Cylinder Deactivation Solenoid parts are listed for the 2007 Jeep Commander, from STANDARD MOTOR PRODUCTS, CLOYES, DORMAN and 2 other brands. STANDARD MOTOR PRODUCTS CDS02 carries the "Popular" badge.

Part numbers include STANDARD MOTOR PRODUCTS CDS02, CLOYES VTS231 and DORMAN 916511XD, among others listed above.

This table covers the cylinder heads that close the top of the block. Read more

14 Cylinder Head parts are listed for the 2007 Jeep Commander, from ENGINETECH and CYLINDER HEAD EXPRESS. CYLINDER HEAD EXPRESS CI212BL carries the "Popular" badge.

This table covers the bolts that clamp the cylinder head to the block. Read more

23 Cylinder Head Bolt parts for the 2007 Jeep Commander come from 8 brands — MAHLE / CLEVITE, VICTOR REINZ, ENGINETECH and 5 other brands. The "Popular" part is ENGINETECH HB202.