2007 Jeep Commander Electrical Connector Parts

This table covers the harness connectors at the 4WD Disconnect. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S2402.

This table covers the harness connectors at the A/C Compressor Clutch Coil. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2007 Jeep Commander — WELLS 1P1711.

This table covers the harness connectors at the A/C Compressor Relay. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 A/C Compressor Relay Connector parts for the 2007 Jeep Commander come from STANDARD MOTOR PRODUCTS. Every part fits all 3 engine options (3.7L V6, 4.7L V8 and 5.7L V8).

Part numbers include STANDARD MOTOR PRODUCTS HP3810 and STANDARD MOTOR PRODUCTS S654.

This table covers the harness connectors at the A/C Refrigerant Pressure Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 A/C Refrigerant Pressure Switch Connector parts for the 2007 Jeep Commander come from 2 brands — FOUR SEASONS and GPD. Every part fits all 3 engine options (3.7L V6, 4.7L V8 and 5.7L V8).

This group includes FOUR SEASONS 20954 and GPD 1711515.

This table covers the harness connectors at each ABS wheel-speed sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 ABS Wheel Speed Sensor Connector parts are listed for the 2007 Jeep Commander, from STANDARD MOTOR PRODUCTS and WELLS. All of them fit every engine offered in the 2007 Commander.

Listed part numbers: STANDARD MOTOR PRODUCTS S2346 and WELLS 1P2545.

This table covers the harness connectors at the Accelerator Pedal Position Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

4 Accelerator Pedal Position Sensor Connector parts are listed for the 2007 Jeep Commander, from STANDARD MOTOR PRODUCTS, ROSTRA and WELLS. 2 parts fit every engine; the other 2 are engine-specific.

Listed part numbers: ROSTRA 610494, STANDARD MOTOR PRODUCTS S1478 and STANDARD MOTOR PRODUCTS S2082, plus the other parts above.

This table covers the Adapter plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

One part is listed for the 2007 Jeep Commander — MOPAR 68021352AA.

This table covers the harness connectors at the Air Bag Clockspring. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S2468.

This table covers the harness connectors at the Air Intake / Charge Temperature Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

6 Air Intake / Charge Temperature Sensor Connector parts for the 2007 Jeep Commander come from 5 brands — STANDARD MOTOR PRODUCTS, WELLS, ROSTRA and 2 other brands. The "Popular" part is WELLS 1P1694. 4 parts fit every engine; the other 2 are engine-specific.

Part numbers include WELLS 1P1694, ROSTRA 610372 and STANDARD MOTOR PRODUCTS HP4665, among others listed above.

This table covers the harness connectors at the Alternator / Generator. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

6 Alternator / Generator Connector parts are listed for the 2007 Jeep Commander, from STANDARD MOTOR PRODUCTS, WELLS, HOLSTEIN and 2 other brands. STANDARD MOTOR PRODUCTS HP4347 carries the "Popular" badge. All of them fit every engine offered in the 2007 Commander.

This group includes STANDARD MOTOR PRODUCTS HP4347, WELLS 1P2047 and HOLSTEIN 2HAR0035 and the remaining parts above.

This table covers the harness connectors at the Ambient Air Temperature Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

6 Ambient Air Temperature Sensor Connector parts are listed for the 2007 Jeep Commander, from STANDARD MOTOR PRODUCTS, WALKER PRODUCTS, WELLS and 2 other brands. WALKER PRODUCTS 2701055 carries the "Popular" badge. All of them fit every engine offered in the 2007 Commander.

This group includes WALKER PRODUCTS 2701055, WELLS 1P1311 and ROSTRA 610056 and the remaining parts above.

This table covers the connectors at the blower resistor or control module. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

33 Blower Motor Control Module / Resistor Connector parts for the 2007 Jeep Commander come from 10 brands — STANDARD MOTOR PRODUCTS, WELLS, FOUR SEASONS and 7 other brands. The "Popular" part is DORMAN 645217. A list this long means Blower Motor Control Module / Resistor Connector applications vary by configuration — the notes carry the qualifiers.

This table covers the body-harness connectors and pigtails. Typical signs include an intermittent fault that moves when you wiggle the harness, or a melted or corroded plug. Match terminal count and keyway. Repair with heat-shrink terminals, not twist-and-tape. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S1960.

This table covers the harness connectors at the Brake Fluid Level Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

5 Brake Fluid Level Sensor Connector parts for the 2007 Jeep Commander come from 4 brands — STANDARD MOTOR PRODUCTS, WELLS, ROSTRA and 1 other brand. The "Popular" part is WELLS 1P1694. Every part fits all 3 engine options (3.7L V6, 4.7L V8 and 5.7L V8).

Part numbers include WELLS 1P1694, ROSTRA 610372 and STANDARD MOTOR PRODUCTS HP4665, among others listed above.

This table covers the harness connectors at the Brake Light Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Brake Light Switch Connector parts for the 2007 Jeep Commander come from 2 brands — STANDARD MOTOR PRODUCTS and WELLS. Every part fits all 3 engine options (3.7L V6, 4.7L V8 and 5.7L V8).

This group includes STANDARD MOTOR PRODUCTS S3095 and WELLS 1P2378.

This table covers the harness connectors at the Camshaft Position Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

6 Camshaft Position Sensor Connector parts are listed for the 2007 Jeep Commander, from UNITED MOTOR PRODUCTS, STANDARD MOTOR PRODUCTS, ROSTRA and 2 other brands. STANDARD MOTOR PRODUCTS S2099 carries the "Popular" badge. 4 parts fit every engine; the other 2 are engine-specific.

This group includes STANDARD MOTOR PRODUCTS S2099, ROSTRA 610196 and UNITED MOTOR PRODUCTS CON61 and the remaining parts above.

This table covers the harness connectors at the Crankshaft Position Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

11 Crankshaft Position Sensor Connector parts are listed for the 2007 Jeep Commander, from STANDARD MOTOR PRODUCTS, ROSTRA, UNITED MOTOR PRODUCTS and 3 other brands. STANDARD MOTOR PRODUCTS S2316 carries the "Popular" badge.

This table covers the harness connectors at the Cruise Control Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2007 Jeep Commander — STANDARD MOTOR PRODUCTS S2462.

This table covers the harness connectors at the Deck Lid / Liftgate Ajar Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

4 Deck Lid / Liftgate Ajar Switch Connector parts for the 2007 Jeep Commander come from 3 brands — STANDARD MOTOR PRODUCTS, UNITED MOTOR PRODUCTS and WELLS. Every part fits all 3 engine options (3.7L V6, 4.7L V8 and 5.7L V8).

Listed part numbers: STANDARD MOTOR PRODUCTS HP4665, STANDARD MOTOR PRODUCTS S2034 and UNITED MOTOR PRODUCTS CON57, plus the other parts above.

This table covers the harness connectors at the Defroster Relay. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Defroster Relay Connector parts for the 2007 Jeep Commander come from 2 brands — STANDARD MOTOR PRODUCTS and UNITED MOTOR PRODUCTS. Every part fits all 3 engine options (3.7L V6, 4.7L V8 and 5.7L V8).

This group includes STANDARD MOTOR PRODUCTS S1600 and UNITED MOTOR PRODUCTS CON30.

This table covers the harness connectors at the Door Lock Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Door Lock Switch Connector parts for the 2007 Jeep Commander come from 2 brands — STANDARD MOTOR PRODUCTS and UNITED MOTOR PRODUCTS. Every part fits all 3 engine options (3.7L V6, 4.7L V8 and 5.7L V8).

Listed part numbers: STANDARD MOTOR PRODUCTS S1600 and UNITED MOTOR PRODUCTS CON30.

This table covers the wiring-harness connectors at the Door. Typical signs include an intermittent fault that moves when you wiggle the harness, or a melted or corroded plug. Match terminal count and keyway. Repair with heat-shrink terminals, not twist-and-tape. Read more

This group shows a single part: MOPAR 56050288AF.

This table covers the harness connectors at the EGR Valve. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 EGR Valve Connector parts are listed for the 2007 Jeep Commander, from STANDARD MOTOR PRODUCTS, UNITED MOTOR PRODUCTS and WELLS. 2 parts fit every engine; the other 1 is engine-specific.

This group includes STANDARD MOTOR PRODUCTS S1922, UNITED MOTOR PRODUCTS CON50 and WELLS 1P1645.

This table covers the harness connectors at the Engine Block Heater. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

MOPAR supplies the 3 Engine Block Heater Connector parts for the 2007 Jeep Commander. 1 part fits every engine; the other 2 are engine-specific.

This group includes MOPAR 4608805AD, MOPAR 68070034AB and MOPAR 68070034AC.

This table covers the harness connectors at the Fog / Driving Lamp Relay. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Fog / Driving Lamp Relay Connector parts for the 2007 Jeep Commander come from 2 brands — STANDARD MOTOR PRODUCTS and UNITED MOTOR PRODUCTS. Every part fits all 3 engine options (3.7L V6, 4.7L V8 and 5.7L V8).

Listed part numbers: STANDARD MOTOR PRODUCTS S1600 and UNITED MOTOR PRODUCTS CON30.

This table covers the harness connectors at the Fuel Injector. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

8 Fuel Injector Connector parts are listed for the 2007 Jeep Commander, from STANDARD MOTOR PRODUCTS, WELLS, ACDELCO and 4 other brands. STANDARD MOTOR PRODUCTS HP3945 carries the "Popular" badge. 7 parts fit every engine; the other 1 is engine-specific.

Part numbers include STANDARD MOTOR PRODUCTS HP3945, STANDARD MOTOR PRODUCTS S824 and WELLS 1P1344, among others listed above.

This table covers the harness connectors at the Fuel Pump / Circuit Opening Relay. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 Fuel Pump / Circuit Opening Relay Connector parts for the 2007 Jeep Commander come from 3 brands — STANDARD MOTOR PRODUCTS, UNITED MOTOR PRODUCTS and WELLS. Every part fits all 3 engine options (3.7L V6, 4.7L V8 and 5.7L V8).

This group includes STANDARD MOTOR PRODUCTS S1600, UNITED MOTOR PRODUCTS CON30 and WELLS 1P4004.

This table covers the harness connectors at the Fuel Sending Unit. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2007 Jeep Commander — STANDARD MOTOR PRODUCTS S1410.

This table covers the harness connectors at the Glove Box Lamp. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2007 Jeep Commander — WELLS 1P3331.

This table covers the wiring-harness connectors at the Headlamp. Typical signs include an intermittent fault that moves when you wiggle the harness, or a melted or corroded plug. Match terminal count and keyway. Repair with heat-shrink terminals, not twist-and-tape. Read more

4 Headlamp Wiring Harness / Connector parts for the 2007 Jeep Commander come from STANDARD MOTOR PRODUCTS. Every part fits all 3 engine options (3.7L V6, 4.7L V8 and 5.7L V8).

This group includes STANDARD MOTOR PRODUCTS F90008, STANDARD MOTOR PRODUCTS F90009 and STANDARD MOTOR PRODUCTS LWH106 and the remaining parts above.

This table covers the harness connectors at the Heated Window Element. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: WELLS 1P2226.

This table covers the harness connectors at the Horn. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: WELLS 1P1580.

This table covers the harness connectors at the Horn Relay. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Horn Relay Connector parts are listed for the 2007 Jeep Commander, from STANDARD MOTOR PRODUCTS and UNITED MOTOR PRODUCTS. All of them fit every engine offered in the 2007 Commander.

Part numbers include STANDARD MOTOR PRODUCTS S1600 and UNITED MOTOR PRODUCTS CON30.

This table covers the harness connectors at the HVAC Control Switch / Panel. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2007 Jeep Commander — ULTRA-POWER 2701055.

This table covers the harness connectors at the HVAC Relay. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 HVAC Relay Connector parts for the 2007 Jeep Commander come from 2 brands — STANDARD MOTOR PRODUCTS and UNITED MOTOR PRODUCTS. Every part fits all 3 engine options (3.7L V6, 4.7L V8 and 5.7L V8).

This group includes STANDARD MOTOR PRODUCTS S1600 and UNITED MOTOR PRODUCTS CON30.

This table covers the harness connectors at the Idle Air Control (IAC) Valve. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Idle Air Control (IAC) Valve Connector parts for the 2007 Jeep Commander come from 2 brands — STANDARD MOTOR PRODUCTS and WELLS.

Listed part numbers: STANDARD MOTOR PRODUCTS S2053 and WELLS 1P1718.

This table covers the harness connectors at the Ignition Coil. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

4 Ignition Coil Connector parts are listed for the 2007 Jeep Commander, from ROSTRA, STANDARD MOTOR PRODUCTS, UNITED MOTOR PRODUCTS and 1 other brand. All of them fit every engine offered in the 2007 Commander.

Listed part numbers: ROSTRA 610156, STANDARD MOTOR PRODUCTS S2087 and UNITED MOTOR PRODUCTS CON60, plus the other parts above.

This table covers the harness connectors at the Ignition Starter Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

7 Ignition Starter Switch Connector parts are listed for the 2007 Jeep Commander, from STANDARD MOTOR PRODUCTS, WELLS, BWD/NIEHOFF and 3 other brands. STANDARD MOTOR PRODUCTS S1768 carries the "Popular" badge. All of them fit every engine offered in the 2007 Commander.

Listed part numbers: STANDARD MOTOR PRODUCTS S1768, WELLS 1P1558 and BWD/NIEHOFF PT1267, plus the other parts above.

This table covers the harness connectors at the Knock / Detonation Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Knock / Detonation Sensor Connector parts are listed for the 2007 Jeep Commander, from WALKER PRODUCTS and WELLS.

Part numbers include WALKER PRODUCTS 2701034 and WELLS 1P1819.

This table covers the harness connectors at the Liftgate Window Release Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S2468.

This table covers the harness connectors at the Manifold Pressure (MAP) Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

5 Manifold Pressure (MAP) Sensor Connector parts are listed for the 2007 Jeep Commander, from STANDARD MOTOR PRODUCTS, ROSTRA, ULTRA-POWER and 2 other brands. STANDARD MOTOR PRODUCTS S2816 carries the "Popular" badge. 2 parts fit every engine; the other 3 are engine-specific.

Listed part numbers: STANDARD MOTOR PRODUCTS S2816, ROSTRA 610107 and ULTRA-POWER 2701095, plus the other parts above.

This table covers the harness connectors at the Oil Pressure Sender / Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

11 Oil Pressure Sender / Switch Connector parts for the 2007 Jeep Commander come from 6 brands — STANDARD MOTOR PRODUCTS, WELLS, ROSTRA and 3 other brands. The "Popular" part is STANDARD MOTOR PRODUCTS HP3925. 7 parts fit every engine; the other 4 are engine-specific.

This table covers the harness connectors at the On-Board Diagnostic (OBD) Port. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2007 Jeep Commander — WELLS 1P1474.

This table covers the harness connectors at the Oxygen (O2) Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Oxygen (O2) Sensor Connector parts are listed for the 2007 Jeep Commander, from STANDARD MOTOR PRODUCTS and WELLS. 1 part fits every engine; the other 1 is engine-specific.

Listed part numbers: STANDARD MOTOR PRODUCTS S1932 and WELLS 1P3359.

This table covers the harness connectors at the Park Assist (PAS) Camera. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Park Assist (PAS) Camera Connector parts for the 2007 Jeep Commander come from 2 brands — METRA and STANDARD MOTOR PRODUCTS. Every part fits all 3 engine options (3.7L V6, 4.7L V8 and 5.7L V8).

Part numbers include METRA AXACCH4 and STANDARD MOTOR PRODUCTS S1911.

This table covers the harness connectors at the Parking Aid Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Parking Aid Sensor Connector parts are listed for the 2007 Jeep Commander, from STANDARD MOTOR PRODUCTS and WELLS. All of them fit every engine offered in the 2007 Commander.

This group includes STANDARD MOTOR PRODUCTS S2393 and WELLS 1P2024.

This table covers the harness connectors at the Parking Lamp Relay. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Parking Lamp Relay Connector parts for the 2007 Jeep Commander come from 2 brands — STANDARD MOTOR PRODUCTS and UNITED MOTOR PRODUCTS. Every part fits all 3 engine options (3.7L V6, 4.7L V8 and 5.7L V8).

This group includes STANDARD MOTOR PRODUCTS S1600 and UNITED MOTOR PRODUCTS CON30.

This table covers the harness connectors at the Power Window Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S2079.

This table covers the harness connectors at the Radiator Fan Relay. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

5 Radiator Fan Relay Connector parts are listed for the 2007 Jeep Commander, from STANDARD MOTOR PRODUCTS, FOUR SEASONS, UNITED MOTOR PRODUCTS and 1 other brand. STANDARD MOTOR PRODUCTS HP3810 carries the "Popular" badge. All of them fit every engine offered in the 2007 Commander.

Part numbers include STANDARD MOTOR PRODUCTS HP3810, FOUR SEASONS 37210 and STANDARD MOTOR PRODUCTS S654, among others listed above.

This table covers the harness connectors at the Radio. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Radio Connector parts for the 2007 Jeep Commander come from METRA. Every part fits all 3 engine options (3.7L V6, 4.7L V8 and 5.7L V8).

This group includes METRA 7165021 and METRA AXADBXHCH1.

This table covers the Repair harnesses. Read more

ROSTRA supplies both parts for the 2007 Jeep Commander. All of them fit every engine offered in the 2007 Commander.

Part numbers include ROSTRA 3500172 and ROSTRA 3500170.

This table covers the harness connectors at the Speed Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

6 Speed Sensor Connector parts for the 2007 Jeep Commander come from 5 brands — STANDARD MOTOR PRODUCTS, WALKER PRODUCTS, ULTRA-POWER and 2 other brands. The "Popular" part is WALKER PRODUCTS 2701055. 2 parts fit every engine; the other 4 are engine-specific.

Part numbers include WALKER PRODUCTS 2701055, STANDARD MOTOR PRODUCTS HP4215 and STANDARD MOTOR PRODUCTS S820, among others listed above.

This table covers the harness connectors at the Starter Motor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

4 Starter Motor Connector parts are listed for the 2007 Jeep Commander, from FAMOUS BRAND, STANDARD MOTOR PRODUCTS, UNITED MOTOR PRODUCTS and 1 other brand. All of them fit every engine offered in the 2007 Commander.

Part numbers include FAMOUS BRAND PTA3009, STANDARD MOTOR PRODUCTS S1600 and UNITED MOTOR PRODUCTS CON30, among others listed above.

This table covers the harness connectors at the Starter Solenoid. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2007 Jeep Commander — STANDARD MOTOR PRODUCTS S3075.

This table covers the harness connectors at the Temperature Sender / Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

9 Temperature Sender / Sensor Connector parts are listed for the 2007 Jeep Commander, from STANDARD MOTOR PRODUCTS, WELLS, WALKER PRODUCTS and 3 other brands. WALKER PRODUCTS 2701055 carries the "Popular" badge.

This group includes WALKER PRODUCTS 2701055, WELLS 1P1311 and FOUR SEASONS 70013 and the remaining parts above.

This table covers the harness connectors at the Throttle Control Actuator. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

STANDARD MOTOR PRODUCTS supplies both parts for the 2007 Jeep Commander.

This group includes STANDARD MOTOR PRODUCTS S1057 and STANDARD MOTOR PRODUCTS S2839.

This table covers the harness connectors at the Throttle Position Sensor (TPS). Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

8 Throttle Position Sensor (TPS) Connector parts for the 2007 Jeep Commander come from 5 brands — WELLS, ROSTRA, WALKER PRODUCTS and 2 other brands. The "Popular" part is WALKER PRODUCTS 2701064. 1 part fits every engine; the other 7 are engine-specific.

Listed part numbers: WALKER PRODUCTS 2701064, DORMAN 645233 and ROSTRA 610302, plus the other parts above.

This table covers the harness connectors at the Trailer Adapter. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Trailer Adapter Connector parts are listed for the 2007 Jeep Commander, from CURT and MOPAR. All of them fit every engine offered in the 2007 Commander.

This group includes CURT 57300 and MOPAR 56019823.

This table covers the trailer-lighting connectors at the hitch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

5 Trailer Connector parts for the 2007 Jeep Commander come from 4 brands — CURT, STANDARD MOTOR PRODUCTS, MOPAR and 1 other brand. The "Popular" part is STANDARD MOTOR PRODUCTS TC556. Every part fits all 3 engine options (3.7L V6, 4.7L V8 and 5.7L V8).

This group includes STANDARD MOTOR PRODUCTS TC556, CURT 55381 and CURT 55414 and the remaining parts above.

This table covers the wiring-harness connectors at the Transmission-Automatic. Typical signs include an intermittent fault that moves when you wiggle the harness, or a melted or corroded plug. Match terminal count and keyway. Repair with heat-shrink terminals, not twist-and-tape. Read more

This group shows a single part: WELLS 1P4037.

This table covers the harness connectors at the Trunk Lid / Tailgate Release Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2007 Jeep Commander — STANDARD MOTOR PRODUCTS S2468.