2008 Jeep Commander Electrical Parts

This table covers the alternators that charge the battery and run the electrical load. Typical signs include dim lights at idle, a battery lamp, or a growl from the charging pulley. Load-test the battery and inspect the belt and grounds — a bad ground mimics a failed alternator. Read more

22 Alternator / Generator parts for the 2008 Jeep Commander come from 11 brands — MOPAR, REMY, WAI GLOBAL and 8 other brands. The "Popular" part is TYC 2112403.

The New section lists 6 options from WAI GLOBAL, TYC, ULTRA-POWER and 2 other brands — brand-new units rather than rebuilt ones. TYC 2112403 is listed in this group.

The Remanufactured section lists 16 options from DENSO, ACDELCO, BOSCH and 5 other brands — factory-rebuilt units with new wear components. DENSO 2101123 is listed in this group.

This table covers the batteries listed by group size and specification. Typical signs include slow cranking, a battery lamp, or a no-start after the vehicle sat overnight. Confirm group size and terminal layout in the notes. Clean the posts and the ground before condemning the battery. Read more

8 Battery parts are listed for the 2008 Jeep Commander, from DEKA, FVP, ACDELCO and 5 other brands. DEKA 9A94R carries the "Popular" badge.

The AGM (Extended Life) section lists 7 options from DEKA, FVP, ACDELCO and 4 other brands — grouped under the catalog's "AGM (Extended Life)" designation — the notes column spells out what sets them apart. DEKA 9A94R is listed in this group.

The Performance AGM (Extended Life + Increased Power) section lists 1 option from FULLRIVER — grouped under the catalog's "Performance AGM (Extended Life + Increased Power)" designation — the notes column spells out what sets them apart. FULLRIVER FT85094R is listed in this group.

Part numbers include DEKA 9A94R, FVP P94RAGM and ACDELCO 94RAGM, among others listed above.

This table covers the positive and ground cables that run from the battery. Typical signs include a stretched or frayed cable, or a control that no longer reaches the end of its travel. Route the new cable through the same clips. A kinked cable binds and fails early. Read more

This group shows a single part: MOPAR 56038740AE.

This table covers the terminals and clamps that connect cables to the battery posts. Read more

DEKA supplies both parts for the 2008 Jeep Commander.

This group includes DEKA 00350 and DEKA 01056.

This table covers the Door control modules. Read more

One part is listed for the 2008 Jeep Commander — MOPAR 4602922AF.

This table covers the engine-control modules that run fuel, spark and emissions. Read more

2 Engine Control Module (ECM Computer) parts for the 2008 Jeep Commander come from DORMAN.

This group includes DORMAN 318060 and DORMAN 318061.

This table covers the replacement fuses for this vehicle's fuse boxes. Typical signs include one circuit dead while its neighbor still works, or a fuse that blows again as soon as you replace it. Match amperage and fuse type. A repeat blow means a short — find it before the next fuse. Read more

12 Fuse parts are listed for the 2008 Jeep Commander, from LITTELFUSE and MOPAR. LITTELFUSE MIN15 carries the "Popular" badge.

The 10 Amp section lists 2 options from LITTELFUSE and MOPAR — grouped under the catalog's "10 Amp" designation — the notes column spells out what sets them apart. LITTELFUSE LMIN10 is listed in this group.

In the 15 Amp grade, LITTELFUSE and MOPAR supply 2 parts: grouped under the catalog's "15 Amp" designation — the notes column spells out what sets them apart. A representative part number is LITTELFUSE MIN15.

In the 20 Amp grade, LITTELFUSE and MOPAR supply 2 parts: grouped under the catalog's "20 Amp" designation — the notes column spells out what sets them apart. A representative part number is LITTELFUSE MIN20.

The 25 Amp section lists 2 options from LITTELFUSE and MOPAR — grouped under the catalog's "25 Amp" designation — the notes column spells out what sets them apart. LITTELFUSE MIN25 is listed in this group.

The 30 Amp section lists 1 option from LITTELFUSE — grouped under the catalog's "30 Amp" designation — the notes column spells out what sets them apart. LITTELFUSE JCAS30 is listed in this group.

In the 40 Amp grade, LITTELFUSE and MOPAR supply 2 parts: grouped under the catalog's "40 Amp" designation — the notes column spells out what sets them apart. A representative part number is LITTELFUSE JCAS40.

The 50 Amp section lists 1 option from LITTELFUSE — grouped under the catalog's "50 Amp" designation — the notes column spells out what sets them apart. LITTELFUSE JCAS50 is listed in this group.

This table covers the fuse blocks that hold this vehicle's fuses. Read more

3 Fuse Block parts for the 2008 Jeep Commander come from MOPAR.

This group includes MOPAR 4692164AB, MOPAR 4692164AD and MOPAR 4692165AB.

This table covers the Fuse Box covers. Read more

One part is listed for the 2008 Jeep Commander — MOPAR 68026933AA.

This table covers the horns mounted in the front of the vehicle. Read more

14 Horn parts are listed for the 2008 Jeep Commander, from FIAMM and DORMAN. FIAMM 7210223 carries the "Popular" badge.

In the Accessory Replacement grade, FIAMM supplies 7 parts: grouped under the catalog's "Accessory Replacement" designation — the notes column spells out what sets them apart. A representative part number is FIAMM 7210223.

The Standard Replacement section lists 7 options from FIAMM and DORMAN — built to original-equipment specification. FIAMM 7201223 is listed in this group.

This table covers the receivers that pick up the key-fob unlock signal. Read more

3 Keyless Entry Module / Receiver parts for the 2008 Jeep Commander come from MOPAR.

Part numbers include MOPAR 5026296AF, MOPAR 5026297AF and MOPAR 5026298AF.

This table covers the key fobs that lock, unlock and start the vehicle. Read more

7 Keyless Entry Remote parts for the 2008 Jeep Commander come from 2 brands — DORMAN and MOPAR.

Part numbers include DORMAN 99266ST, DORMAN 99263ST and DORMAN 99264ST, among others listed above.

This table covers the Mobile Phone Hands Free control modules. Read more

One part is listed for the 2008 Jeep Commander — MOPAR 82212499.

This table covers the Park Assist (PAS) Camera modules. Typical signs include a cluster of unrelated faults, a no-communication code, or a module that will not sleep. Confirm power, ground and programming compatibility in the notes. Modules are rarely plug-and-play across years. Read more

One part is listed for the 2008 Jeep Commander — MOPAR 5026016AE.

This table covers the ultrasonic park-aid sensors in the bumper. Typical signs include a warning lamp, a stored code, or a reading that drops out when the harness is wiggled. Inspect the connector and ground before replacing the sensor — wiring faults are often condemned as bad sensors. Read more

3 Parking Aid Sensor parts for the 2008 Jeep Commander come from 3 brands — HELLA, MOPAR and STANDARD MOTOR PRODUCTS.

This group includes HELLA 358141561, MOPAR 5HX08TZZAA and STANDARD MOTOR PRODUCTS PPS76.

This table covers the Power inverters. Read more

This group shows a single part: MOPAR 5082095AB.

This table covers the powertrain-control modules that run engine and transmission. Read more

One part is listed for the 2008 Jeep Commander — MOPAR R5150258AC.

This table covers the speed sensors on the transmission, transfer case or ABS ring. Typical signs include a dead speedometer, harsh transmission shifts, or a code for vehicle speed. Inspect the tone wheel and the connector before replacing the sensor. Read more

20 Speed Sensor parts are listed for the 2008 Jeep Commander, from HOLSTEIN, STANDARD MOTOR PRODUCTS, WALKER PRODUCTS and 13 other brands. SKP SK917647 carries the "Popular" badge.

In the Economy grade, HOLSTEIN, SKP, ATP and 7 other brands supply 12 parts: the catalog's value-priced group. A representative part number is SKP SK917647.

In the Full Service Kit grade, WALKER PRODUCTS supplies 1 part: grouped under the catalog's "Full Service Kit" designation — the notes column spells out what sets them apart. A representative part number is WALKER PRODUCTS 24091042.

The Standard Replacement section: 7 options from DELPHI, MOPAR, ROSTRA and 4 other brands. DELPHI SS11424 is listed in this group.

This table covers the starter motors that crank the engine. Typical signs include no motion, a squeal, or a motor that only runs on one speed. Confirm power, ground and the control module before replacing the motor. Read more

24 Starter Motor parts for the 2008 Jeep Commander come from 10 brands — PURE ENERGY, REMY, TERREPOWER and 7 other brands. The "Popular" part is PURE ENERGY 17937N.

The New section: 10 options from PURE ENERGY, REMY, TYC and 2 other brands. PURE ENERGY 17937N is listed in this group.

The Remanufactured section: 14 options from ACDELCO, DENSO, FVP and 5 other brands. MOPAR R6044736AC is listed in this group.

This table covers the Starter Motor Heat shields. Typical signs include a bent shield rubbing a rotor, or rust-through that leaves the backing open. A rubbing shield will eat a new rotor. Straighten or replace it before the wheel goes back on. Read more

One part is listed for the 2008 Jeep Commander — MOPAR 56044116AE.

This table covers the Yaw sensors. Typical signs include a warning lamp, a stored code, or a reading that drops out when the harness is wiggled. Inspect the connector and ground before replacing the sensor — wiring faults are often condemned as bad sensors. Read more

2 Yaw Sensor parts are listed for the 2008 Jeep Commander, from MOPAR and WELLS.

This group includes MOPAR 56029328AB and WELLS 5S16917.