356 Drivetrain parts are listed for the 2008 Jeep Commander, in 55 part types, covering all 3 engine options (3.7L V6, 4.7L V8 and 5.7L V8). Each one has a brand, a manufacturer part number and notes that say where it fits.
On the 2008 Jeep Commander, the drivetrain system moves power from transmission to wheels through axles, CV joints, driveshafts, differentials and wheel-end hardware. Most of the listed parts are Differential Pinion Bearing / Race (63 parts), Differential Rebuild Kit (29 parts) and Drive Shaft (22 parts). The other 52 part types cover the remaining 242 parts.
The 2008 Jeep Commander was sold with 3 engines. 62 parts fit every engine; the other 294 are engine-specific. Each part shows which engine(s) it fits.
37 brands supply drivetrain parts for the 2008 Jeep Commander, led by MOPAR (43 parts), WJB / INMOTION PARTS (32 parts) and SKF (30 parts), plus 34 more brands. Quality grades include Standard Replacement, Economy and Standard Kit.
A "Popular" badge means the source catalog flagged the part as frequently chosen for the 2008 Jeep Commander. 60 parts have it, including DORMAN 600404 (4WD Actuator) and NATIONAL 710489 (Axle Shaft Seal). Each part number opens a page with every vehicle that part fits.
4WD Actuator
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Popular Fits: all 2008 Commander engines | 600404 | 🇺🇸 US 🇨🇦 CA | 4WD | View on Amazon |
| MOPAR Fits: all 2008 Commander engines | 52114003AF | 🇺🇸 US 🇨🇦 CA | Fits Elec LTD Slip Differential Rear Axle213mm Rear Axle | View on Amazon |
| SKP Fits: all 2008 Commander engines | SK600404 | 🇺🇸 US 🇨🇦 CA | 4WD | View on Amazon |
| STANDARD MOTOR PRODUCTS Fits: all 2008 Commander engines | TCA89 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| WELLS Fits: all 2008 Commander engines | 1S12656 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front & Rear Axlewith Limited Slip Differential | View on Amazon |
This table covers the actuators that engage four-wheel drive at the transfer case or axle. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same.
5 4WD Actuator parts for the 2008 Jeep Commander come from 5 brands — DORMAN, MOPAR, SKP and 2 other brands. The "Popular" part is DORMAN 600404. Every part fits all 3 engine options (3.7L V6, 4.7L V8 and 5.7L V8).
Part numbers include DORMAN 600404, MOPAR 52114003AF and SKP SK600404, among others listed above.
Axle / Differential Assembly
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOPAR Fits: 4.7L V8 | 68031427AA | 🇺🇸 US 🇨🇦 CA | Rear3.73 Axle Ratio | View on Amazon |
This table covers the Axle / Differential assemblies.
This group shows a single part: MOPAR 68031427AA.
Axle Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| USA STANDARD GEAR Fits: all 2008 Commander engines | USA33426 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Axle Wheel Studs | View on Amazon |
This table covers the Axle bolts.
One part is listed for the 2008 Jeep Commander — USA STANDARD GEAR USA33426.
Axle Shaft
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: all 2008 Commander engines | 630036 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear Rightwith Sales Code DSF (Electronic Limited Slip Differential Rear Axle) | View on Amazon |
| DORMAN Fits: all 2008 Commander engines | 630040 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear Leftwith Sales Code DSF (Electronic Limited Slip Differential Rear Axle) | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DANA Fits: all 2008 Commander engines | 20039062 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Spicer | View on Amazon |
| MOPAR Fits: all 2008 Commander engines | 52111913AA | 🇺🇸 US 🇨🇦 CA | Rear LeftElec LTD Slip Differential Rear Axle | View on Amazon |
| MOPAR Fits: all 2008 Commander engines | 52114076AA | 🇺🇸 US 🇨🇦 CA | Rear LeftConventional Differential Rear Axle | View on Amazon |
| MOPAR Fits: all 2008 Commander engines | 52114077AA | 🇺🇸 US 🇨🇦 CA | Fits RightRear | View on Amazon |
This table covers the Axle shafts.
6 Axle Shaft parts for the 2008 Jeep Commander come from 3 brands — MOPAR, DORMAN and DANA. Every part fits all 3 engine options (3.7L V6, 4.7L V8 and 5.7L V8).
The Economy section lists 2 options from DORMAN — the catalog's value-priced group. DORMAN 630036 is listed in this group.
In the Standard Replacement grade, MOPAR and DANA supply 4 parts: built to original-equipment specification. A representative part number is DANA 20039062.
Part numbers include DORMAN 630036, DORMAN 630040 and DANA 20039062, among others listed above.
Axle Shaft Lock / Snap Ring
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOPAR Fits: all 2008 Commander engines | 52069710AB | 🇺🇸 US 🇨🇦 CA | Front200mm Front Axle | View on Amazon |
This table covers the Axle Shaft Lock / Snap rings.
This group shows a single part: MOPAR 52069710AB.
Axle Shaft Retainer / Clip
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOTIVE GEAR Fits: all 2008 Commander engines | 3833322 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | RearChrysler 8.25", 8.375" (C213R/E) | View on Amazon |
| MOTIVE GEAR Fits: all 2008 Commander engines | 52069426 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | RearChrysler 8.25", 8.375" (C213R/E) | View on Amazon |
This table covers the Axle Shaft retainers and clips.
MOTIVE GEAR supplies both parts for the 2008 Jeep Commander. All of them fit every engine offered in the 2008 Commander.
This group includes MOTIVE GEAR 3833322 and MOTIVE GEAR 52069426.
Axle Shaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| NATIONAL Popular Fits: all 2008 Commander engines | 710489 | 🇺🇸 US 🇨🇦 CA | Fits Front Right4WD | View on Amazon |
| NATIONAL Popular Fits: all 2008 Commander engines | 710872 | 🇺🇸 US 🇨🇦 CA | Fits Front Left4WD | View on Amazon |
| TIMKEN Popular Fits: all 2008 Commander engines | 710489 | 🇺🇸 US 🇨🇦 CA | 1.378 in. Shaft Size2.218 in. Bore | View on Amazon |
| BCA Fits: all 2008 Commander engines | NS710489 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front Rightwith 7.875 IN Ring Gear | View on Amazon |
| BCA Fits: all 2008 Commander engines | NS710872 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front Leftwith 7.875 IN Ring Gear | View on Amazon |
| DANA Fits: all 2008 Commander engines | 35938 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Spicer | View on Amazon |
| SCHAEFFLER Fits: all 2008 Commander engines | SS2425 | 🇺🇸 US 🇨🇦 CA | Front Right4WD | View on Amazon |
| SCHAEFFLER Fits: all 2008 Commander engines | SS6677 | 🇺🇸 US 🇨🇦 CA | Front Left4WD | View on Amazon |
| SKF Fits: all 2008 Commander engines | 13763 | 🇺🇸 US 🇨🇦 CA | Front Right4WD | View on Amazon |
| SKF Fits: all 2008 Commander engines | 16950A | 🇺🇸 US 🇨🇦 CA | Front Left4WD | View on Amazon |
| WJB / INMOTION PARTS Fits: all 2008 Commander engines | WS710489 | 🇺🇸 US 🇨🇦 CA | Fits Front Right4WD | View on Amazon |
| WJB / INMOTION PARTS Fits: all 2008 Commander engines | WS710872 | 🇺🇸 US 🇨🇦 CA | Fits Front Left4WD | View on Amazon |
This table covers the seals where an axle shaft exits the housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
12 Axle Shaft Seal parts are listed for the 2008 Jeep Commander, from NATIONAL, BCA, SCHAEFFLER and 4 other brands. NATIONAL 710489 carries the "Popular" badge. All of them fit every engine offered in the 2008 Commander.
CV Axle
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CARDONE Fits: all 2008 Commander engines | 603418 | 🇺🇸 US 🇨🇦 CA | Remanufactured | View on Amazon |
Heavy Duty
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| TRAKMOTIVE Fits: all 2008 Commander engines | CH8100HDX | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Extreme Duty | View on Amazon |
| TRAKMOTIVE Fits: all 2008 Commander engines | CH8102HDX | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Extreme Duty | View on Amazon |
| TRAKMOTIVE Fits: all 2008 Commander engines | CH8101HDX | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Extreme Duty | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GSP Popular Fits: all 2008 Commander engines | NCV82502 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front Right | View on Amazon |
| GSP Popular Fits: all 2008 Commander engines | NCV82500 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front Leftwith Limited Slip Differential | View on Amazon |
| TOP NOTCH Popular Fits: all 2008 Commander engines | TN30206 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front Right | View on Amazon |
| TRAKMOTIVE Popular Fits: all 2008 Commander engines | CH8101 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Does Not Include ABS Ring | View on Amazon |
| APWI Fits: all 2008 Commander engines | CH8364 | 🇺🇸 US 🇨🇦 CA | Front Right4WD | View on Amazon |
| APWI Fits: all 2008 Commander engines | CH8363 | 🇺🇸 US 🇨🇦 CA | Front Left4WD | View on Amazon |
| APWI Fits: all 2008 Commander engines | CH8377 | 🇺🇸 US 🇨🇦 CA | Front Left4WD | View on Amazon |
| GSP Fits: all 2008 Commander engines | NCV82501 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front Leftwithout Limited Slip Differential | View on Amazon |
| MOPAR Fits: all 2008 Commander engines | 52104590AA | 🇺🇸 US 🇨🇦 CA | RightFront | View on Amazon |
| MOPAR Fits: all 2008 Commander engines | 52104701AB | 🇺🇸 US 🇨🇦 CA | Front LeftElec LTD Slip Differential Front Axle | View on Amazon |
| TOP NOTCH Fits: all 2008 Commander engines | TN30205 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front Leftwithout Limited Slip Differential | View on Amazon |
| TOP NOTCH Fits: all 2008 Commander engines | TN30204 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front Leftwith Limited Slip Differential | View on Amazon |
| TRAKMOTIVE Fits: all 2008 Commander engines | CH8100 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Does Not Include ABS Ring | View on Amazon |
| TRAKMOTIVE Fits: all 2008 Commander engines | CH8102 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Does Not Include ABS Ring | View on Amazon |
This table covers the complete CV axle shafts from differential (or hub) to wheel. Typical signs include a click in tight turns, grease flung around the wheel well, or a vibration that builds with speed. A torn boot caught early is a boot kit; caught late it is the whole axle. Torque the axle nut to the method in the notes.
18 CV Axle parts are listed for the 2008 Jeep Commander, from TRAKMOTIVE, GSP, TOP NOTCH and 3 other brands. GSP NCV82502 carries the "Popular" badge. All of them fit every engine offered in the 2008 Commander.
Economy: 1 part, from CARDONE. A representative part number is CARDONE 603418.
The Heavy Duty section lists 3 options from TRAKMOTIVE — rated for severe service. TRAKMOTIVE CH8100HDX is listed in this group.
The Standard Replacement section: 14 options from GSP, TOP NOTCH, TRAKMOTIVE and 2 other brands. GSP NCV82502 is listed in this group.
CV Joint
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| APWI Popular Fits: all 2008 Commander engines | CH5303 | 🇺🇸 US 🇨🇦 CA | Front4WD | View on Amazon |
| AUTOTECNICA Fits: all 2008 Commander engines | CY0418375 | 🇺🇸 US 🇨🇦 CA | Front4WD | View on Amazon |
| DANA Fits: all 2008 Commander engines | 2510140085 | 🇺🇸 US 🇨🇦 CA | Spicer Select | View on Amazon |
| DORMAN Fits: all 2008 Commander engines | 932303 | 🇺🇸 US 🇨🇦 CA | Front4WD | View on Amazon |
| SKP Fits: all 2008 Commander engines | SK932303 | 🇺🇸 US 🇨🇦 CA | Front4WD | View on Amazon |
This table covers the constant-velocity joints at each end of a drive axle.
5 CV Joint parts are listed for the 2008 Jeep Commander, from APWI, AUTOTECNICA, DANA and 2 other brands. APWI CH5303 carries the "Popular" badge. All of them fit every engine offered in the 2008 Commander.
Listed part numbers: APWI CH5303, AUTOTECNICA CY0418375 and DANA 2510140085, plus the other parts above.
CV Joint Boot
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MEVOTECH Fits: all 2008 Commander engines | DX433 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front Inner | View on Amazon |
| MEVOTECH Fits: all 2008 Commander engines | DX892 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front Outer | View on Amazon |
| MOPAR Fits: all 2008 Commander engines | 5140759AA | 🇺🇸 US 🇨🇦 CA | Outer | View on Amazon |
| MOPAR Fits: all 2008 Commander engines | 5140758AA | 🇺🇸 US 🇨🇦 CA | Left | View on Amazon |
This table covers the boots that keep grease in a CV joint. Typical signs include a split boot, grease flung around the joint, or a click once grit is inside. A boot caught early is a kit. Once the joint has clicked, the joint itself is usually worn.
4 CV Joint Boot parts are listed for the 2008 Jeep Commander, from MEVOTECH and MOPAR. All of them fit every engine offered in the 2008 Commander.
This group includes MEVOTECH DX433, MEVOTECH DX892 and MOPAR 5140759AA and the remaining parts above.
Differential Carrier
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DANA Popular Fits: all 2008 Commander engines | 74210X | 🇺🇸 US 🇨🇦 CA | loaded Tracloc, 3.54 & up posi, 1-5/8" tall, complete with bearings & shims27 Spline | View on Amazon |
| DANA Popular Fits: all 2008 Commander engines | DS73100 | 🇺🇸 US 🇨🇦 CA | Trac Loc Positraction, complete29 Spline | View on Amazon |
| DANA Fits: all 2008 Commander engines | DS73631 | 🇺🇸 US 🇨🇦 CA | Tracloc loaded, 2.733.31 Posi " Y" 1-7/16" Tall, complete | View on Amazon |
| DANA Fits: all 2008 Commander engines | 2005084 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Spicer | View on Amazon |
| MOPAR Fits: all 2008 Commander engines | 5183518AA | 🇺🇸 US 🇨🇦 CA | Fits Differential Assembly,RearIncludes 33,35,36,37,38 | View on Amazon |
| MOPAR Fits: all 2008 Commander engines | 52104673AG | 🇺🇸 US 🇨🇦 CA | Differential Assembly, Frontwith Electric Limited Slip Differential Front Axle with Internal Parts | View on Amazon |
| MOPAR Fits: all 2008 Commander engines | 52111226AC | 🇺🇸 US 🇨🇦 CA | Differential Assembly, Frontwithout Elec LTD Slip Differential Front Axle with Internal Parts | View on Amazon |
| MOPAR Fits: all 2008 Commander engines | 52114574AA | 🇺🇸 US 🇨🇦 CA | Fits Differential Assembly,Rearwithout Tag 68031427AA | View on Amazon |
This table covers the carriers that hold the differential gears in the axle.
8 Differential Carrier parts are listed for the 2008 Jeep Commander, from DANA and MOPAR. DANA 74210X carries the "Popular" badge. All of them fit every engine offered in the 2008 Commander.
Listed part numbers: DANA 74210X, DANA DS73100 and DANA DS73631, plus the other parts above.
Differential Carrier Bearing / Race
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| WJB / INMOTION PARTS Popular Fits: 4.7L V8, 5.7L V8 | WTA36 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Fits Rearwith 8.5 IN Ring Gear | View on Amazon |
| WJB / INMOTION PARTS Fits: 4.7L V8, 5.7L V8 | WTLM603012 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Race | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACDELCO Popular Fits: 4.7L V8, 5.7L V8 | A36 | 🇺🇸 US 🇨🇦 CA | GoldSet | View on Amazon |
| TIMKEN Popular Fits: 4.7L V8, 5.7L V8 | LM603049 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | RearNon Dana Axle | View on Amazon |
| TIMKEN Popular Fits: 4.7L V8, 5.7L V8 | SET36 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Tapered Roller Bearing | View on Amazon |
| BCA Fits: 4.7L V8, 5.7L V8 | NBA36 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Taper Bearing SetIncludes Cup and Cone | View on Amazon |
| NSK Fits: 4.7L V8, 5.7L V8 | TRB36 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Kit Contents: 1 Cup, 1 ConeBearing and Race Set | View on Amazon |
| SCHAEFFLER Fits: 4.7L V8, 5.7L V8 | JLM104910 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Race Only | View on Amazon |
| SCHAEFFLER Fits: 4.7L V8, 5.7L V8 | LM603012 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Race | View on Amazon |
| SCHAEFFLER Fits: 4.7L V8, 5.7L V8 | KT36 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear1.781 In Inside Diameter X 3.063 In Outside Diameter X 0.844 In Thick | View on Amazon |
| SCHAEFFLER Fits: 4.7L V8, 5.7L V8 | KLM603049 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Bearing Only | View on Amazon |
| SCHAEFFLER Fits: 4.7L V8, 5.7L V8 | KJLM104948 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear21.5 mm Width | View on Amazon |
| SKF Fits: 4.7L V8, 5.7L V8 | LM603012 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Race | View on Amazon |
| SKF Fits: 4.7L V8, 5.7L V8 | JLM104910 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Race | View on Amazon |
| SKF Fits: 4.7L V8, 5.7L V8 | LM603049VP | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | with 1.7810 In. Bearing Inside Diameter | View on Amazon |
| SKF Fits: 4.7L V8, 5.7L V8 | JLM104948 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | with 1.969 In. Bearing Inside Diameter0.847" Width | View on Amazon |
| SKF Fits: 4.7L V8, 5.7L V8 | BR36 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rearwith 8.25" Axle | View on Amazon |
| SKF Fits: 4.7L V8, 5.7L V8 | BR182 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front | View on Amazon |
This table covers the bearings and races that support the differential carrier.
18 Differential Carrier Bearing / Race parts are listed for the 2008 Jeep Commander, from SKF, SCHAEFFLER, WJB / INMOTION PARTS and 4 other brands. WJB / INMOTION PARTS WTA36 carries the "Popular" badge.
Economy: 2 parts, from WJB / INMOTION PARTS. A representative part number is WJB / INMOTION PARTS WTA36.
The Standard Replacement section: 16 options from SKF, SCHAEFFLER, TIMKEN and 3 other brands. ACDELCO A36 is listed in this group.
Differential Clutch Pack
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DANA Fits: 4.7L V8, 5.7L V8 | 701046X | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Spicer | View on Amazon |
This table covers the clutch packs in a limited-slip or locking differential.
One part is listed for the 2008 Jeep Commander — DANA 701046X.
Differential Cover
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: 4.7L V8, 5.7L V8 | 697709 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | RearChrysler Axle | View on Amazon |
| MOPAR Fits: 4.7L V8, 5.7L V8 | 3723681AC | 🇺🇸 US 🇨🇦 CA | RearConventional Differential Rear Axle | View on Amazon |
| SKP Fits: 4.7L V8, 5.7L V8 | SK697709 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Fits RearChrysler Axle | View on Amazon |
This table covers the Differential covers.
3 Differential Cover parts for the 2008 Jeep Commander come from 3 brands — DORMAN, MOPAR and SKP.
Listed part numbers: DORMAN 697709, MOPAR 3723681AC and SKP SK697709.
Differential Cover Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Fits: 4.7L V8, 5.7L V8 | B15570 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | LimitedBody code: XK | View on Amazon |
| MOTIVE GEAR Fits: 4.7L V8, 5.7L V8 | 5131GASKET | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | RearChrysler 8.25", 8.375" (213R) | View on Amazon |
| VICTOR REINZ Fits: 4.7L V8, 5.7L V8 | 711956400 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | with Dana Super 44, Aluminium AxleCarrier Gasket | View on Amazon |
This table covers the gaskets that seal the Differential Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
3 Differential Cover Gasket parts are listed for the 2008 Jeep Commander, from ELRING, MOTIVE GEAR and VICTOR REINZ.
Listed part numbers: ELRING B15570, MOTIVE GEAR 5131GASKET and VICTOR REINZ 711956400.
Differential Cover Plug
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: 4.7L V8, 5.7L V8 | 090062 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | RearChrysler Axle | View on Amazon |
| MOPAR Fits: 4.7L V8, 5.7L V8 | 3723687 | 🇺🇸 US 🇨🇦 CA | Rear213mm Rear Axle | View on Amazon |
This table covers the Differential Cover plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes.
2 Differential Cover Plug parts for the 2008 Jeep Commander come from 2 brands — DORMAN and MOPAR.
Listed part numbers: DORMAN 090062 and MOPAR 3723687.
Differential Cross Pin
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| RICHMOND Fits: 4.7L V8, 5.7L V8 | 8002781 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Differential Pinion Shaft | View on Amazon |
This table covers the Differential Cross pins.
This group shows a single part: RICHMOND 8002781.
Differential Crush Sleeve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DANA Popular Fits: 4.7L V8, 5.7L V8 | 43916 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Spicer | View on Amazon |
| DANA Fits: 4.7L V8, 5.7L V8 | 46925 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Spicer | View on Amazon |
| MOTIVE GEAR Fits: 4.7L V8, 5.7L V8 | 1234726 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Crush Sleeve | View on Amazon |
| SKF Fits: 4.7L V8, 5.7L V8 | KRS111 | 🇺🇸 US 🇨🇦 CA | with 8.25" Ring Gear | View on Amazon |
| SKF Fits: 4.7L V8, 5.7L V8 | KRS139 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front | View on Amazon |
This table covers the Differential Crush sleeves.
5 Differential Crush Sleeve parts for the 2008 Jeep Commander come from 3 brands — DANA, SKF and MOTIVE GEAR. The "Popular" part is DANA 43916.
This group includes DANA 43916, DANA 46925 and MOTIVE GEAR 1234726 and the remaining parts above.
Differential Gear Installation Kit
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| RICHMOND Fits: 4.7L V8, 5.7L V8 | 831071B | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Install Kit Includes Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound | View on Amazon |
This table covers the Differential Gear Installation kits.
This group shows a single part: RICHMOND 831071B.
Differential Lock Actuator
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: 4.7L V8, 5.7L V8 | 600404 | 🇺🇸 US 🇨🇦 CA | Rear4WD | View on Amazon |
This table covers the Differential Lock actuators. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same.
One part is listed for the 2008 Jeep Commander — DORMAN 600404.
Differential Mount
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SKP Popular Fits: 4.7L V8, 5.7L V8 | SK905405 | 🇺🇸 US 🇨🇦 CA | Front4WD | View on Amazon |
| SKP Popular Fits: 4.7L V8, 5.7L V8 | SK905404 | 🇺🇸 US 🇨🇦 CA | Front4WD | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ANCHOR Fits: 4.7L V8, 5.7L V8 | 3357 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front | View on Amazon |
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ANCHOR Fits: 4.7L V8 | 3639 | 🇺🇸 US 🇨🇦 CA | Front Right4WD | View on Amazon |
| DEA / MARMON RIDE CONTROL Fits: 4.7L V8, 5.7L V8 | A5528 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front, Suspension Axle Mount | View on Amazon |
| DORMAN Fits: 4.7L V8, 5.7L V8 | 905405 | 🇺🇸 US 🇨🇦 CA | Front4WD | View on Amazon |
| DORMAN Fits: 4.7L V8, 5.7L V8 | 905404 | 🇺🇸 US 🇨🇦 CA | Front4WD | View on Amazon |
| WESTAR Fits: 4.7L V8, 5.7L V8 | EM4102 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front | View on Amazon |
This table covers the Differential mounts. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes.
8 Differential Mount parts for the 2008 Jeep Commander come from 5 brands — SKP, ANCHOR, DORMAN and 2 other brands. The "Popular" part is SKP SK905405.
The Economy section: 2 options from SKP. SKP SK905405 is listed in this group.
Standard Replacement: 1 part, from ANCHOR. A representative part number is ANCHOR 3357.
5 further parts sit outside the graded sections, with the same engine-level match.
Listed part numbers: SKP SK905405, SKP SK905404 and ANCHOR 3357, plus the other parts above.
Differential Pinion Bearing / Race
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| WJB / INMOTION PARTS Popular Fits: 4.7L V8, 5.7L V8 | WTM86649 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Fits Rear Outerwith 8.25 IN Ring Gear | View on Amazon |
| WJB / INMOTION PARTS Popular Fits: 4.7L V8, 5.7L V8 | WTM88048 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Bearing Shape: Cylindrical | View on Amazon |
| FAMOUS BRAND Fits: 4.7L V8, 5.7L V8 | SM86610 | 🇺🇸 US 🇨🇦 CA | Race | View on Amazon |
| FAMOUS BRAND Fits: 4.7L V8, 5.7L V8 | SM802011 | 🇺🇸 US 🇨🇦 CA | RearInner | View on Amazon |
| FAMOUS BRAND Fits: 4.7L V8, 5.7L V8 | SM88010 | 🇺🇸 US 🇨🇦 CA | Fits RearOuter | View on Amazon |
| FAMOUS BRAND Fits: 4.7L V8, 5.7L V8 | SM802048 | 🇺🇸 US 🇨🇦 CA | RearInner | View on Amazon |
| ULTRA-POWER Fits: 4.7L V8, 5.7L V8 | WTM88048 | 🇺🇸 US 🇨🇦 CA | RearOUTER | View on Amazon |
| ULTRA-POWER Fits: 4.7L V8, 5.7L V8 | WTM802048 | 🇺🇸 US 🇨🇦 CA | Fits RearInner | View on Amazon |
| WJB / INMOTION PARTS Fits: 4.7L V8, 5.7L V8 | WTHM803110 | 🇺🇸 US 🇨🇦 CA | Race | View on Amazon |
| WJB / INMOTION PARTS Fits: 4.7L V8, 5.7L V8 | WTM802011 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Race | View on Amazon |
| WJB / INMOTION PARTS Fits: 4.7L V8, 5.7L V8 | WTM86610 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | RaceCup Outside Diameter (In): 2.5310000000000001 In | View on Amazon |
| WJB / INMOTION PARTS Fits: 4.7L V8, 5.7L V8 | WTM88010 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | RaceCup Outside Diameter (In): 2.6880000000000002 In | View on Amazon |
| WJB / INMOTION PARTS Fits: 4.7L V8, 5.7L V8 | WTM802048 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Bearing Shape: Cylindrical | View on Amazon |
| WJB / INMOTION PARTS Fits: 4.7L V8, 5.7L V8 | WTM88043 | 🇺🇸 US 🇨🇦 CA | Fits Front Outer4WD | View on Amazon |
| WJB / INMOTION PARTS Fits: 4.7L V8, 5.7L V8 | WTHM803146 | 🇺🇸 US 🇨🇦 CA | Fits Front Inner4WD | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SKF Popular Fits: 4.7L V8, 5.7L V8 | BR52 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear OuterSpicer Axle | View on Amazon |
| TIMKEN Popular Fits: 4.7L V8, 5.7L V8 | M802011 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Race | View on Amazon |
| TIMKEN Popular Fits: 4.7L V8, 5.7L V8 | M86649 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Fits Rear OuterDana/Spicer 35C Axle | View on Amazon |
| TIMKEN Popular Fits: 4.7L V8, 5.7L V8 | M802048 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear InnerChrysler Axle - 8.25" Ring Gear | View on Amazon |
| ACDELCO Fits: 4.7L V8, 5.7L V8 | M86610X | 🇺🇸 US 🇨🇦 CA | GoldRace | View on Amazon |
| BCA Fits: 4.7L V8, 5.7L V8 | NBM86610 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Race | View on Amazon |
| BCA Fits: 4.7L V8, 5.7L V8 | NBM88010 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Race | View on Amazon |
| BCA Fits: 4.7L V8, 5.7L V8 | NBM802011 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Race | View on Amazon |
| BCA Fits: 4.7L V8, 5.7L V8 | NBM86649 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Bearing Shape: Cylindrical | View on Amazon |
| BCA Fits: 4.7L V8, 5.7L V8 | NBM88048 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Bearing Shape: Cylindrical | View on Amazon |
| BCA Fits: 4.7L V8, 5.7L V8 | NBM802048 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Bearing Shape: Cylindrical | View on Amazon |
| BCA Fits: 4.7L V8, 5.7L V8 | NBHM803110 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Race | View on Amazon |
| BCA Fits: 4.7L V8, 5.7L V8 | NBM88043 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front Outerwith 7.875 IN Ring Gear | View on Amazon |
| BCA Fits: 4.7L V8, 5.7L V8 | NBBR52 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Bearing & Race | View on Amazon |
| BCA Fits: 4.7L V8, 5.7L V8 | NBHM803146 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front Innerwith Chrysler C200F, Chrysler C200FE Axle(S) | View on Amazon |
| BCA Fits: 4.7L V8, 5.7L V8 | NBHM801346 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front Innerwith 7.875 IN Ring Gear | View on Amazon |
| DANA Fits: 4.7L V8, 5.7L V8 | 707064X | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Spicer | View on Amazon |
| MOPAR Fits: 4.7L V8, 5.7L V8 | 2070316 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | FrontCorporate 8.25 | View on Amazon |
| MOPAR Fits: 4.7L V8, 5.7L V8 | 2800484 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | RearCorporate 8.25 | View on Amazon |
| MOPAR Fits: 4.7L V8, 5.7L V8 | 4864210 | 🇺🇸 US 🇨🇦 CA | FrontCup and Cone | View on Amazon |
| MOTIVE GEAR Fits: 4.7L V8, 5.7L V8 | 707064XR | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Koyo Bearings | View on Amazon |
| NATIONAL Fits: 4.7L V8, 5.7L V8 | M88043 | 🇺🇸 US 🇨🇦 CA | Fits Front Outer4WD | View on Amazon |
| NATIONAL Fits: 4.7L V8, 5.7L V8 | HM803146 | 🇺🇸 US 🇨🇦 CA | Fits Front Inner4WD | View on Amazon |
| SCHAEFFLER Fits: 4.7L V8, 5.7L V8 | M86610 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Race | View on Amazon |
| SCHAEFFLER Fits: 4.7L V8, 5.7L V8 | HM88610 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Race | View on Amazon |
| SCHAEFFLER Fits: 4.7L V8, 5.7L V8 | M88010 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Race | View on Amazon |
| SCHAEFFLER Fits: 4.7L V8, 5.7L V8 | KM86649 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Repair | View on Amazon |
| SCHAEFFLER Fits: 4.7L V8, 5.7L V8 | KT309 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Bearing and Race SetRace | View on Amazon |
| SCHAEFFLER Fits: 4.7L V8, 5.7L V8 | M802011 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Race | View on Amazon |
| SCHAEFFLER Fits: 4.7L V8, 5.7L V8 | KM802048 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear3 Speed Spicer 5531 Auxiliary Transmission | View on Amazon |
| SCHAEFFLER Fits: 4.7L V8, 5.7L V8 | KT63 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear OuterSpicer Axle | View on Amazon |
| SCHAEFFLER Fits: 4.7L V8, 5.7L V8 | KM88048 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear Outerwith Spicer Axle | View on Amazon |
| SCHAEFFLER Fits: 4.7L V8, 5.7L V8 | HM803110 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Race | View on Amazon |
| SCHAEFFLER Fits: 4.7L V8, 5.7L V8 | KM88043 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front Outer3 Speed Spicer 7231 Auxiliary Transmission | View on Amazon |
| SKF Fits: 4.7L V8, 5.7L V8 | M86610VP | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Race | View on Amazon |
| SKF Fits: 4.7L V8, 5.7L V8 | M88010VP | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Race | View on Amazon |
| SKF Fits: 4.7L V8, 5.7L V8 | M802011 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear Innerwithout Spicer Axle | View on Amazon |
| SKF Fits: 4.7L V8, 5.7L V8 | M802011VP | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | RaceTapered | View on Amazon |
| SKF Fits: 4.7L V8, 5.7L V8 | HM803110 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Race | View on Amazon |
| SKF Fits: 4.7L V8, 5.7L V8 | HM803146 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front Inner | View on Amazon |
| SKF Fits: 4.7L V8, 5.7L V8 | M802048011 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Tapered Roller Bearing Set (Bearing and Race) | View on Amazon |
| TIMKEN Fits: 4.7L V8, 5.7L V8 | M86610 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Race | View on Amazon |
| TIMKEN Fits: 4.7L V8, 5.7L V8 | M88010 | 🇺🇸 US 🇨🇦 CA | Race | View on Amazon |
| TIMKEN Fits: 4.7L V8, 5.7L V8 | HM88610 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Race | View on Amazon |
| TIMKEN Fits: 4.7L V8, 5.7L V8 | HM803110 | 🇺🇸 US 🇨🇦 CA | Race | View on Amazon |
| TIMKEN Fits: 4.7L V8, 5.7L V8 | HM88648 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear InnerDana/Spicer 35C Axle | View on Amazon |
| TIMKEN Fits: 4.7L V8, 5.7L V8 | M88043 | 🇺🇸 US 🇨🇦 CA | Front Outer4WD | View on Amazon |
| TIMKEN Fits: 4.7L V8, 5.7L V8 | HM803146 | 🇺🇸 US 🇨🇦 CA | Front Inner4WD | View on Amazon |
This table covers the bearings and races on the differential pinion.
63 Differential Pinion Bearing / Race parts for the 2008 Jeep Commander come from 12 brands — BCA, SCHAEFFLER, TIMKEN and 9 other brands. The "Popular" part is WJB / INMOTION PARTS WTM86649. Grades run from Economy through Standard Replacement; Standard Replacement is the most populated section, led by BCA, SCHAEFFLER, TIMKEN and 6 other brands.
Differential Pinion Flange
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DANA Fits: 4.7L V8, 5.7L V8 | 2003901 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Spicer | View on Amazon |
| MOPAR Fits: 4.7L V8, 5.7L V8 | 5143735AB | 🇺🇸 US 🇨🇦 CA | Fits 4 Door5 Speed Automatic 545RFE Transmission | View on Amazon |
| MOPAR Fits: 4.7L V8, 5.7L V8 | 5143757AA | 🇺🇸 US 🇨🇦 CA | Quadra-Trac II Full-Time, Active 4WD4 Door | View on Amazon |
This table covers the flanges that connect the driveshaft to the differential pinion.
3 Differential Pinion Flange parts are listed for the 2008 Jeep Commander, from MOPAR and DANA.
Listed part numbers: DANA 2003901, MOPAR 5143735AB and MOPAR 5143757AA.
Differential Pinion Nut
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DANA Fits: 4.7L V8, 5.7L V8 | 30271 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Spicer | View on Amazon |
| DORMAN Fits: 4.7L V8, 5.7L V8 | 57700 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| MOTIVE GEAR Fits: 4.7L V8, 5.7L V8 | 1260823 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Differential Pinion Shaft NutPinion Nut | View on Amazon |
This table covers the Differential Pinion nuts.
3 Differential Pinion Nut parts are listed for the 2008 Jeep Commander, from DANA, DORMAN and MOTIVE GEAR.
Listed part numbers: DANA 30271, DORMAN 57700 and MOTIVE GEAR 1260823.
Differential Pinion Repair Sleeve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| WJB / INMOTION PARTS Popular Fits: 4.7L V8, 5.7L V8 | WS99166 | 🇺🇸 US 🇨🇦 CA | Shaft Diameter Minimum (In): 1.647 In | View on Amazon |
| BCA Fits: 4.7L V8, 5.7L V8 | NS99166 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front Outerwith Chrysler C200F, Chrysler C200FE Axle(S) | View on Amazon |
| NATIONAL Fits: 4.7L V8, 5.7L V8 | 99166 | 🇺🇸 US 🇨🇦 CA | Fits Front Outer4WD | View on Amazon |
| SCHAEFFLER Fits: 4.7L V8, 5.7L V8 | SR3491 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rearwith 1.685 In Shaft | View on Amazon |
| SCHAEFFLER Fits: 4.7L V8, 5.7L V8 | SS3489 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front Outer | View on Amazon |
This table covers the wear sleeves used to restore a grooved pinion seal surface.
5 Differential Pinion Repair Sleeve parts are listed for the 2008 Jeep Commander, from SCHAEFFLER, WJB / INMOTION PARTS, BCA and 1 other brand. WJB / INMOTION PARTS WS99166 carries the "Popular" badge.
Listed part numbers: WJB / INMOTION PARTS WS99166, BCA NS99166 and NATIONAL 99166, plus the other parts above.
Differential Pinion Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| NATIONAL Popular Fits: 4.7L V8, 5.7L V8 | 710877 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear Outerwith 8.5 IN Ring Gear | View on Amazon |
| NATIONAL Popular Fits: 4.7L V8, 5.7L V8 | 710480 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Fits Rear Outerwith 8.25 IN Ring Gear | View on Amazon |
| SKF Popular Fits: 4.7L V8, 5.7L V8 | 17350 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rearwith 8.25 Ring Gear | View on Amazon |
| TIMKEN Popular Fits: 4.7L V8, 5.7L V8 | 714675 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | RearDana/Spicer 35C Axle | View on Amazon |
| TIMKEN Popular Fits: 4.7L V8, 5.7L V8 | 710480 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 1.732 in. Shaft Size2.614 in. Bore | View on Amazon |
| BCA Fits: 4.7L V8, 5.7L V8 | NS710480 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear Outerwith 8.25 IN Ring Gear | View on Amazon |
| MOPAR Fits: 4.7L V8, 5.7L V8 | 52070339AC | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear Outerwith 8.25 IN Ring Gear | View on Amazon |
| MOPAR Fits: 4.7L V8, 5.7L V8 | 68003265AA | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| MOPAR Fits: 4.7L V8, 5.7L V8 | 52111953AC | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| MOTIVE GEAR Fits: 4.7L V8, 5.7L V8 | 8516N | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Gasket | View on Amazon |
| MOTIVE GEAR Fits: 4.7L V8, 5.7L V8 | 68003265AA | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Fits Rear Outerwith 8.5 (In) Ring Gear | View on Amazon |
| MOTIVE GEAR Fits: 4.7L V8, 5.7L V8 | 710480 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear2.621" OD, 1.732" ID, .445" Wide | View on Amazon |
| NATIONAL Fits: 4.7L V8, 5.7L V8 | 710839 | 🇺🇸 US 🇨🇦 CA | Fits Front Outer4WD | View on Amazon |
| SCHAEFFLER Fits: 4.7L V8, 5.7L V8 | SS2788 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear2.62" O.D. X 0.41" Width | View on Amazon |
| SKF Fits: 4.7L V8, 5.7L V8 | 15754 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front | View on Amazon |
| SKF Fits: 4.7L V8, 5.7L V8 | 18870A | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | RearSpicer Axle | View on Amazon |
| TIMKEN Fits: 4.7L V8, 5.7L V8 | 710839 | 🇺🇸 US 🇨🇦 CA | Front4WD | View on Amazon |
| TIMKEN Fits: 4.7L V8, 5.7L V8 | SL260081 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | RearDana/Spicer 44 Axle | View on Amazon |
| WJB / INMOTION PARTS Fits: 4.7L V8, 5.7L V8 | WS710839 | 🇺🇸 US 🇨🇦 CA | Fits Front Outer4WD | View on Amazon |
| WJB / INMOTION PARTS Fits: 4.7L V8, 5.7L V8 | WS710877 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear Outerwith 8.5 IN Ring Gear | View on Amazon |
| WJB / INMOTION PARTS Fits: 4.7L V8, 5.7L V8 | WS710480 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Fits Rear Outerwith 8.25 IN Ring Gear | View on Amazon |
This table covers the seals at the differential pinion yoke. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
21 Differential Pinion Seal parts are listed for the 2008 Jeep Commander, from TIMKEN, NATIONAL, SKF and 5 other brands. NATIONAL 710877 carries the "Popular" badge.
Differential Pinion Shaft Lock Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: 4.7L V8, 5.7L V8 | 81048 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Differential Shaft Lock Bolt | View on Amazon |
| MOTIVE GEAR Fits: 4.7L V8, 5.7L V8 | C825LB | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | RearChrysler 8.25", 8.375" (C213R/E), 9.25" | View on Amazon |
This table covers the Differential Pinion Shaft Lock bolts.
2 Differential Pinion Shaft Lock Bolt parts for the 2008 Jeep Commander come from 2 brands — DORMAN and MOTIVE GEAR.
Listed part numbers: DORMAN 81048 and MOTIVE GEAR C825LB.
Differential Pinion Shim
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOTIVE GEAR Popular Fits: 4.7L V8, 5.7L V8 | 1100 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Pinion Shim Pack | View on Amazon |
| RICHMOND Popular Fits: 4.7L V8, 5.7L V8 | 1600901 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear DifferentialChrysler 8.25/8.375" (C213R/E) | View on Amazon |
| MOPAR Fits: 4.7L V8, 5.7L V8 | 3507575 | 🇺🇸 US 🇨🇦 CA | Crush213mm Rear Axle | View on Amazon |
| MOPAR Fits: 4.7L V8, 5.7L V8 | 5183525AA | 🇺🇸 US 🇨🇦 CA | CrushDana 44/226mm Rear Axle | View on Amazon |
| MOPAR Fits: 4.7L V8, 5.7L V8 | 3723520 | 🇺🇸 US 🇨🇦 CA | 0.020.020 | View on Amazon |
| MOPAR Fits: 4.7L V8, 5.7L V8 | 3723526 | 🇺🇸 US 🇨🇦 CA | 0.026.026 | View on Amazon |
| MOPAR Fits: 4.7L V8, 5.7L V8 | 3723529 | 🇺🇸 US 🇨🇦 CA | 0.029.029 | View on Amazon |
| MOPAR Fits: 4.7L V8, 5.7L V8 | 5017332AA | 🇺🇸 US 🇨🇦 CA | 0.040 | View on Amazon |
| MOPAR Fits: 4.7L V8, 5.7L V8 | 5017333AA | 🇺🇸 US 🇨🇦 CA | 0.041 | View on Amazon |
This table covers the Differential Pinion shims.
9 Differential Pinion Shim parts are listed for the 2008 Jeep Commander, from MOPAR, MOTIVE GEAR and RICHMOND. MOTIVE GEAR 1100 carries the "Popular" badge.
Listed part numbers: MOTIVE GEAR 1100, RICHMOND 1600901 and MOPAR 3507575, plus the other parts above.
Differential Rebuild Kit
Master Kit
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SKF Popular Fits: 4.7L V8, 5.7L V8 | SDK303BMK | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Master Kit | View on Amazon |
| BCA Fits: 4.7L V8, 5.7L V8 | NBDRK339JMK | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Master Kit | View on Amazon |
| BCA Fits: 4.7L V8, 5.7L V8 | NBDRK303BMK | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Master Kit | View on Amazon |
| DORMAN Fits: 4.7L V8, 5.7L V8 | 697027 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear8.25" Ring Gear | View on Amazon |
| MOTIVE GEAR Fits: 4.7L V8, 5.7L V8 | R825RJLMK | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Master Bearing Kit Includes Koyo Tapered Bearings, Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound | View on Amazon |
| MOTIVE GEAR Fits: 4.7L V8, 5.7L V8 | R825RJLMKT | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Master Bearing Kit Includes Timken Tapered Bearings, Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound | View on Amazon |
| USA STANDARD GEAR Fits: 4.7L V8, 5.7L V8 | USA14204 | 🇺🇸 US 🇨🇦 CA | Yukon Differential Master KitIncludes Timken Bearings | View on Amazon |
| USA STANDARD GEAR Fits: 4.7L V8, 5.7L V8 | USA14147 | 🇺🇸 US | Rearwith 10 Bolt Cover | View on Amazon |
| USA STANDARD GEAR Fits: 4.7L V8, 5.7L V8 | ZKC200 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Differential Rebuild KitsIncludes Koyo Bearings | View on Amazon |
| USA STANDARD GEAR Fits: 4.7L V8, 5.7L V8 | USA14211 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Yukon Master KitIncludes Differential Bearings, Shims, Pinion and Axle Seals, Crush Sleeve, Pinion Nut, and Ring Gear Bolts | View on Amazon |
Standard Kit
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOTIVE GEAR Popular Fits: 4.7L V8, 5.7L V8 | R825RJ | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Bearing Kit Includes Koyo Tapered Bearings, Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion N | View on Amazon |
| NATIONAL Popular Fits: 4.7L V8, 5.7L V8 | RA303A | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Fits Rearwith 8.25 IN Ring Gear | View on Amazon |
| SKF Popular Fits: 4.7L V8, 5.7L V8 | SDK303B | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Standard Kit | View on Amazon |
| SKF Popular Fits: 4.7L V8, 5.7L V8 | SDK308 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Standard Kit | View on Amazon |
| TIMKEN Popular Fits: 4.7L V8, 5.7L V8 | DRK303B | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Standard Kit | View on Amazon |
| BCA Fits: 4.7L V8, 5.7L V8 | NBDRK303B | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Standard Kit | View on Amazon |
| BCA Fits: 4.7L V8, 5.7L V8 | NBDRK339J | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Standard Kit | View on Amazon |
| LUK Fits: 4.7L V8, 5.7L V8 | GDK303B | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Standard Kit | View on Amazon |
| MOTIVE GEAR Fits: 4.7L V8, 5.7L V8 | R825RJT | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Bearing Kit Includes Timken Tapered Bearings , Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion | View on Amazon |
| USA STANDARD GEAR Fits: 4.7L V8, 5.7L V8 | USA11137 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Differential Bearing Kit | View on Amazon |
| WJB / INMOTION PARTS Fits: 4.7L V8, 5.7L V8 | WKRA303A | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Fits Rearwith 8.25 IN Ring Gear | View on Amazon |
Super Kit
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| USA STANDARD GEAR Fits: 4.7L V8, 5.7L V8 | ZGK2203 | 🇺🇸 US | Gear and Install Kit PackageIncludes Ring & pinion, Koyo Bearings, 4.11 Ratio Gear Set | View on Amazon |
| USA STANDARD GEAR Fits: 4.7L V8, 5.7L V8 | ZGK2200 | 🇺🇸 US | Gear and Install Kit PackageIncludes Ring & pinion, Koyo Bearings, 3.55 Ratio Gear Set | View on Amazon |
| USA STANDARD GEAR Fits: 4.7L V8, 5.7L V8 | ZGK2201 | 🇺🇸 US | Gear and Install Kit PackageIncludes Ring & pinion, Koyo Bearings, 3.73 Ratio Gear Set | View on Amazon |
| USA STANDARD GEAR Fits: 4.7L V8, 5.7L V8 | ZGK2199 | 🇺🇸 US | Gear and Install Kit PackageIncludes Ring & pinion, Koyo Bearings, 3.07 Ratio Gear Set | View on Amazon |
| USA STANDARD GEAR Fits: 4.7L V8, 5.7L V8 | ZGK2202 | 🇺🇸 US | Gear and Install Kit PackageIncludes Ring & pinion, Koyo Bearings, 3.90 Ratio Gear Set | View on Amazon |
| USA STANDARD GEAR Fits: 4.7L V8, 5.7L V8 | ZGK2207 | 🇺🇸 US | Gear and Install Kit PackageIncludes Ring & pinion, Koyo Bearings, 3.90 Ratio Gear Set, 29 Spline Dura Grip Limited Slip Carrier | View on Amazon |
| USA STANDARD GEAR Fits: 4.7L V8, 5.7L V8 | ZGK2206 | 🇺🇸 US | Gear and Install Kit PackageIncludes Ring & pinion, Koyo Bearings, 3.73 Ratio Gear Set, 29 Spline Dura Grip Limited Slip Carrier | View on Amazon |
| USA STANDARD GEAR Fits: 4.7L V8, 5.7L V8 | ZGK2204 | 🇺🇸 US | Gear and Install Kit PackageIncludes Ring & pinion, Koyo Bearings, 3.07 Ratio Gear Set, 29 Spline Dura Grip Limited Slip Carrier | View on Amazon |
This table covers kits that group the bearings, races and seals for a differential rebuild.
29 Differential Rebuild Kit parts for the 2008 Jeep Commander come from 9 brands — USA STANDARD GEAR, BCA, MOTIVE GEAR and 6 other brands. The "Popular" part is SKF SDK303BMK. They are grouped as Master Kit, Standard Kit and Super Kit, with Standard Kit the largest group at 11 parts from MOTIVE GEAR, SKF, BCA and 5 other brands.
Differential Ring and Pinion
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DANA Popular Fits: 4.7L V8, 5.7L V8 | 10009172 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | SVL | View on Amazon |
| RICHMOND Popular Fits: 4.7L V8, 5.7L V8 | CR825 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | EXCel | View on Amazon |
| DORMAN Fits: 4.7L V8, 5.7L V8 | 697356 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear8.25" Ring Gear | View on Amazon |
| DORMAN Fits: 4.7L V8, 5.7L V8 | 697352 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear8.25" Ring Gear | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOPAR Fits: 4.7L V8, 5.7L V8 | 5135943AC | 🇺🇸 US 🇨🇦 CA | 3.55 Axle Ratio213mm Rear Axle | View on Amazon |
| MOTIVE GEAR Fits: 4.7L V8, 5.7L V8 | C825 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Fits RearChrysler 8.25 (213RE) Differential | View on Amazon |
| USA STANDARD GEAR Fits: 4.7L V8, 5.7L V8 | ZGC825 | 🇺🇸 US 🇨🇦 CA | Ring Gear Diameter: 8.25"Differential Cover Bolts: 10 | View on Amazon |
This table covers the ring-and-pinion gear sets that set the axle ratio.
7 Differential Ring and Pinion parts are listed for the 2008 Jeep Commander, from DORMAN, DANA, RICHMOND and 3 other brands. DANA 10009172 carries the "Popular" badge.
Economy: 4 parts, from DORMAN, DANA and RICHMOND. A representative part number is DANA 10009172.
The Standard Replacement section: 3 options from MOPAR, MOTIVE GEAR and USA STANDARD GEAR. MOPAR 5135943AC is listed in this group.
Part numbers include DANA 10009172, RICHMOND CR825 and DORMAN 697356, among others listed above.
Differential Ring Gear Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOPAR Popular Fits: 4.7L V8, 5.7L V8 | 6509207AA | 🇺🇸 US 🇨🇦 CA | 200MM Front Axle3.73 Axle Ratio | View on Amazon |
| DANA Fits: 4.7L V8, 5.7L V8 | 45784 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Spicer | View on Amazon |
| MOTIVE GEAR Fits: 4.7L V8, 5.7L V8 | RGBT001 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear DifferentialChrysler 8.25" | View on Amazon |
| MOTIVE GEAR Fits: 4.7L V8, 5.7L V8 | 1304 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Ring Gear Bolt | View on Amazon |
| MOTIVE GEAR Fits: 4.7L V8, 5.7L V8 | 68003554AA | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear DifferentialDana 44 JK Reverse Differential | View on Amazon |
This table covers the Differential Ring Gear bolts.
5 Differential Ring Gear Bolt parts are listed for the 2008 Jeep Commander, from MOTIVE GEAR, MOPAR and DANA. MOPAR 6509207AA carries the "Popular" badge.
Listed part numbers: MOPAR 6509207AA, DANA 45784 and MOTIVE GEAR RGBT001, plus the other parts above.
Differential Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Fits: 4.7L V8, 5.7L V8 | B17370 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Material: FPM (fluoride rubber)Radial Shaft Seal Design: BS BD | View on Amazon |
This table covers the seals at the Differential. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
This group shows a single part: ELRING B17370.
Differential Spider Gear
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DANA Fits: 4.7L V8, 5.7L V8 | 2005085 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | FSGRCarrier Gear Kit | View on Amazon |
| MOTIVE GEAR Fits: 4.7L V8, 5.7L V8 | C825BIL | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Differential Carrier Gear Kit29 Spline | View on Amazon |
This table covers the Differential Spider gears.
2 Differential Spider Gear parts are listed for the 2008 Jeep Commander, from DANA and MOTIVE GEAR.
Listed part numbers: DANA 2005085 and MOTIVE GEAR C825BIL.
Drive Shaft
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SKP Popular Fits: 4.7L V8, 5.7L V8 | SK938137 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front4WD | View on Amazon |
| SKP Popular Fits: 4.7L V8, 5.7L V8 | SK936071 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Length: 42" | View on Amazon |
| TOP NOTCH Popular Fits: 4.7L V8, 5.7L V8 | TN8214PS | 🇺🇸 US 🇨🇦 CA | Rear1 Piece Shaft | View on Amazon |
| WJB / INMOTION PARTS Popular Fits: 4.7L V8, 5.7L V8 | WDS38137 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 38 1/8" | View on Amazon |
| WJB / INMOTION PARTS Popular Fits: 4.7L V8, 5.7L V8 | WDS38138 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 31.5" | View on Amazon |
| CARDONE Fits: 4.7L V8, 5.7L V8 | 653007 | 🇺🇸 US 🇨🇦 CA | Front4WD | View on Amazon |
| CARDONE Fits: 4.7L V8, 5.7L V8 | 653012 | 🇺🇸 US 🇨🇦 CA | Front4WD | View on Amazon |
| CARDONE Fits: 4.7L V8, 5.7L V8 | 659789 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Frontwith 15-1/2" (393 mm) Long Driveshaft | View on Amazon |
| DORMAN Fits: 4.7L V8, 5.7L V8 | 938138 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Length: 31.5" | View on Amazon |
| DORMAN Fits: 4.7L V8, 5.7L V8 | 936076 | 🇺🇸 US 🇲🇽 MX | Length: 45.125"OE Fix | View on Amazon |
| DORMAN Fits: 4.7L V8, 5.7L V8 | 936071 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Length: 39.625"OE Fix | View on Amazon |
| DORMAN Fits: 4.7L V8 | 936081 | 🇺🇸 US | Length: 58.75"OE Fix | View on Amazon |
| DORMAN Fits: 4.7L V8, 5.7L V8 | 976354 | 🇺🇸 US 🇲🇽 MX | Length: 42.5" | View on Amazon |
| MOPAR Fits: 4.7L V8, 5.7L V8 | 52853432AA | 🇺🇸 US 🇨🇦 CA | FrontQuadra-Trac I Full-Time 4WD | View on Amazon |
| TRAKMOTIVE Fits: 4.7L V8 | CHP416 | 🇺🇸 US 🇨🇦 CA | Front4WD | View on Amazon |
| TRAKMOTIVE Fits: 4.7L V8, 5.7L V8 | CHP024 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | FrontNV245 Transfer Case | View on Amazon |
| TRAKMOTIVE Fits: 4.7L V8, 5.7L V8 | CHP063 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear | View on Amazon |
| ULTRA-POWER Fits: 4.7L V8, 5.7L V8 | 936071 | 🇺🇸 US 🇨🇦 CA | 39.625" Long | View on Amazon |
| USA STANDARD GEAR Fits: 4.7L V8, 5.7L V8 | ZDS9797 | 🇺🇸 US | FrontOE Tube length of 23-1/4 in. from weld to weld | View on Amazon |
| USA STANDARD GEAR Fits: 4.7L V8, 5.7L V8 | ZDS9907 | 🇺🇸 US | FrontOverall compressed length is 34-1/4 In. long from flange To flange. 6 Bolt CV Head and 4 Bolt Flange | View on Amazon |
| USA STANDARD GEAR Fits: 4.7L V8, 5.7L V8 | ZDS105813 | 🇺🇸 US | Rear4WD | View on Amazon |
| WJB / INMOTION PARTS Fits: 4.7L V8, 5.7L V8 | WDS36071 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear4WD | View on Amazon |
This table covers the driveshafts that carry torque from the transmission or transfer case.
22 Drive Shaft parts for the 2008 Jeep Commander come from 9 brands — DORMAN, WJB / INMOTION PARTS, CARDONE and 6 other brands. The "Popular" part is SKP SK938137.
Drive Shaft Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: 4.7L V8, 5.7L V8 | 13864 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Fits Rear | View on Amazon |
This table covers the Drive Shaft bolts.
One part is listed for the 2008 Jeep Commander — DORMAN 13864.
Drive Shaft End Yoke
Flange Style
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| USA STANDARD GEAR Fits: 4.7L V8, 5.7L V8 | USA41267 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Differential Pinion Flange | View on Amazon |
Strap Style (Easier to Install)
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DANA Fits: 4.7L V8, 5.7L V8 | 2438011X | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Strap Style 1310 Series | View on Amazon |
U-Bolt Style (Stronger)
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOTIVE GEAR Fits: 4.7L V8, 5.7L V8 | MG13106010 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear DifferentialDana Super 60 Differential | View on Amazon |
This table covers the Drive Shaft End yokes.
3 Drive Shaft End Yoke parts are listed for the 2008 Jeep Commander, from USA STANDARD GEAR, DANA and MOTIVE GEAR.
In the Flange Style grade, USA STANDARD GEAR supplies 1 part: grouped under the catalog's "Flange Style" designation — the notes column spells out what sets them apart. A representative part number is USA STANDARD GEAR USA41267.
The Strap Style (Easier to Install) section lists 1 option from DANA — grouped under the catalog's "Strap Style (Easier to Install)" designation — the notes column spells out what sets them apart. DANA 2438011X is listed in this group.
The U-Bolt Style (Stronger) section lists 1 option from MOTIVE GEAR — grouped under the catalog's "U-Bolt Style (Stronger)" designation — the notes column spells out what sets them apart. MOTIVE GEAR MG13106010 is listed in this group.
Part numbers include USA STANDARD GEAR USA41267, DANA 2438011X and MOTIVE GEAR MG13106010.
Drive Shaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOPAR Fits: 4.7L V8, 5.7L V8 | 52069706AB | 🇺🇸 US 🇨🇦 CA | Axle Drive Shaft Seal | View on Amazon |
| MOPAR Fits: 4.7L V8, 5.7L V8 | 52111338AC | 🇺🇸 US 🇨🇦 CA | Axle Drive Shaft Seal | View on Amazon |
This table covers the seals at the Drive Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
MOPAR supplies both parts for the 2008 Jeep Commander.
Listed part numbers: MOPAR 52069706AB and MOPAR 52111338AC.
Gear Oil
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOBIL Popular Fits: 4.7L V8, 5.7L V8 | 102490 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Synthetic Gear Lube Limited Slip 75W-14 0Mobil 1 Synthetic Gear Lubricant LS 75W-14 0 | View on Amazon |
| VALVOLINE Popular Fits: 4.7L V8, 5.7L V8 | VV982 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Advanced Full Synthetic SAE 75W-14 0 Gear Oil1 Quart | View on Amazon |
| LUCAS OIL Fits: 4.7L V8, 5.7L V8 | 10121 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | SYNTHETIC SAE 75W-14 0 GEAR OIL1 qt | View on Amazon |
| LUCAS OIL Fits: 4.7L V8, 5.7L V8 | 10122 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Synthetic SAE 75W-14 0 Gear Oil1 Gallon | View on Amazon |
| LUCAS OIL Fits: 4.7L V8, 5.7L V8 | 10123 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Synthetic SAE 75W-14 0 Gear Oil5 Gallon | View on Amazon |
| LUCAS OIL Fits: 4.7L V8, 5.7L V8 | 18054 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Synthetic SAE 75W-14 0 Gear Oil6 Gallon | View on Amazon |
| VALVOLINE Fits: 4.7L V8, 5.7L V8 | 889787 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Full Synthetic SAE 75W-14 0 Gear Oil1 Quart Flex Fill | View on Amazon |
| VALVOLINE Fits: 4.7L V8, 5.7L V8 | 887344 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Advanced Full Synthetic SAE 75W-14 0 Gear Oil1 Gallon | View on Amazon |
| VALVOLINE Fits: 4.7L V8, 5.7L V8 | VV981 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Advanced Full Synthetic SAE 75W-14 0 Gear Oil5 Gallon | View on Amazon |
This table covers the gear oils specified for the axle or transfer case. Typical signs include a low-oil lamp, knocking, or oil that has gone thin before the next interval. Match the viscosity and spec in the notes, not just the weight on the bottle.
9 Gear Oil parts are listed for the 2008 Jeep Commander, from VALVOLINE, LUCAS OIL and MOBIL. MOBIL 102490 carries the "Popular" badge.
Part numbers include MOBIL 102490, VALVOLINE VV982 and LUCAS OIL 10121, among others listed above.
Gear Oil Additive
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| USA STANDARD GEAR Fits: 4.7L V8, 5.7L V8 | USA15018 | 🇺🇸 US | Friction ModifierPositraction Additive | View on Amazon |
This table covers the Gear Oil additives.
One part is listed for the 2008 Jeep Commander — USA STANDARD GEAR USA15018.
Transfer Case Drive Chain
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| USA STANDARD GEAR Fits: 4.7L V8, 5.7L V8 | ZTCHHV090 | 🇺🇸 US | NP24543 Links, 1-1/4 Inch Wide, Ovular-Shaped Pins | View on Amazon |
This table covers the chains that drive the transfer case.
This group shows a single part: USA STANDARD GEAR ZTCHHV090.
Transfer Case Fluid
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOBIL Fits: 4.7L V8, 5.7L V8 | 126505 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Multi-Vehicle ATF | View on Amazon |
| MOPAR Fits: 4.7L V8, 5.7L V8 | 5016796AE | 🇺🇸 US 🇨🇦 CA | Quart | View on Amazon |
| MOPAR Fits: 4.7L V8, 5.7L V8 | 5016796AC | 🇺🇸 US 🇨🇦 CA | Quart | View on Amazon |
This table covers the fluids specified for the transfer case. Typical signs include discolored fluid, a burnt smell, or a level that keeps dropping. Use only the specification in the notes — the tables group grades because they are not interchangeable.
3 Transfer Case Fluid parts are listed for the 2008 Jeep Commander, from MOPAR and MOBIL.
This group includes MOBIL 126505, MOPAR 5016796AE and MOPAR 5016796AC.
Transfer Case Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| USA STANDARD GEAR Fits: 4.7L V8, 5.7L V8 | ZTTSK245J | 🇺🇸 US | Transfer Case Gasket Seal Kit | View on Amazon |
This table covers the gaskets that seal the Transfer Case. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
This group shows a single part: USA STANDARD GEAR ZTTSK245J.
Transfer Case Input Shaft Bearing
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| NATIONAL Popular Fits: 4.7L V8, 5.7L V8 | 110L | 🇺🇸 US 🇨🇦 CA | 4WDwith New Process 245J Transfer Case | View on Amazon |
| SKF Popular Fits: 4.7L V8, 5.7L V8 | 6010NRJ | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | New Process 140New Process 245 | View on Amazon |
| BCA Fits: 4.7L V8, 5.7L V8 | NB110L | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Fits with New Process 140 Transfer Casewith Full Time 4WD | View on Amazon |
| SCHAEFFLER Fits: 4.7L V8, 5.7L V8 | 6010 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front1.969 In Inside Diameter X 3.15 In Outside Diameter X 0.63 In Thick | View on Amazon |
| TIMKEN Fits: 4.7L V8, 5.7L V8 | 110CB | 🇺🇸 US 🇨🇦 CA | 0.627 in. Width | View on Amazon |
| WJB / INMOTION PARTS Fits: 4.7L V8, 5.7L V8 | RB6010NR | 🇺🇸 US 🇨🇦 CA | 4WDwith New Process 245J Transfer Case | View on Amazon |
This table covers the Transfer Case Input Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.
6 Transfer Case Input Shaft Bearing parts are listed for the 2008 Jeep Commander, from NATIONAL, SKF, BCA and 3 other brands. NATIONAL 110L carries the "Popular" badge.
Listed part numbers: NATIONAL 110L, SKF 6010NRJ and BCA NB110L, plus the other parts above.
Transfer Case Input Shaft Pilot Bearing
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| NATIONAL Fits: 4.7L V8, 5.7L V8 | FC66561 | 🇺🇸 US 🇨🇦 CA | 4WDwith New Process 245J Transfer Case | View on Amazon |
| WJB / INMOTION PARTS Fits: 4.7L V8, 5.7L V8 | WRFC66561 | 🇺🇸 US 🇨🇦 CA | 4WDwith New Process 245J Transfer Case | View on Amazon |
This table covers the Transfer Case Input Shaft Pilot bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.
2 Transfer Case Input Shaft Pilot Bearing parts are listed for the 2008 Jeep Commander, from NATIONAL and WJB / INMOTION PARTS.
Part numbers include NATIONAL FC66561 and WJB / INMOTION PARTS WRFC66561.
Transfer Case Input Shaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| NATIONAL Popular Fits: 4.7L V8, 5.7L V8 | 710684 | 🇺🇸 US 🇨🇦 CA | Fits 4WDwith New Process 245J Transfer Case | View on Amazon |
| TIMKEN Popular Fits: 4.7L V8, 5.7L V8 | 710684 | 🇺🇸 US 🇨🇦 CA | 4WDNew Process 245 | View on Amazon |
| BCA Fits: 4.7L V8, 5.7L V8 | NS710684 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Fits with New Process 140 Transfer Casewith Full Time 4WD | View on Amazon |
| MOPAR Fits: 4.7L V8, 5.7L V8 | 5143714AA | 🇺🇸 US 🇨🇦 CA | Fits Quadra-Trac I Full-Time 4WD4 Door | View on Amazon |
| SKF Fits: 4.7L V8, 5.7L V8 | 23275 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | New Process 245 | View on Amazon |
| USA STANDARD GEAR Fits: 4.7L V8, 5.7L V8 | ZTSEA45355 | 🇺🇸 US | FrontNP245 Transfer Case, Input Shaft Seal | View on Amazon |
| WJB / INMOTION PARTS Fits: 4.7L V8, 5.7L V8 | WS710684 | 🇺🇸 US 🇨🇦 CA | Fits 4WDwith New Process 245J Transfer Case | View on Amazon |
This table covers the seals at the Transfer Case Input Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
7 Transfer Case Input Shaft Seal parts for the 2008 Jeep Commander come from 7 brands — NATIONAL, TIMKEN, BCA and 4 other brands. The "Popular" part is NATIONAL 710684.
Listed part numbers: NATIONAL 710684 and BCA NS710684, plus the other parts above.
Transfer Case Motor
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Popular Fits: 4.7L V8, 5.7L V8 | 600915 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Case Model NVG 245 | View on Amazon |
| SKP Popular Fits: 4.7L V8, 5.7L V8 | SK600915 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Case Model NVG 245 | View on Amazon |
| AUTOTECNICA Fits: 4.7L V8, 5.7L V8 | CY0419232 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| LARES Fits: 4.7L V8, 5.7L V8 | 30620 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Fits Case Model NVG 245 | View on Amazon |
| STANDARD MOTOR PRODUCTS Fits: 4.7L V8, 5.7L V8 | TCM103 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| USA STANDARD GEAR Fits: 4.7L V8, 5.7L V8 | ZTSM600915 | 🇺🇸 US | NV146J & NV245J SHIFT MOTOR | View on Amazon |
| WAI GLOBAL Fits: 4.7L V8, 5.7L V8 | TC1017 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Case Model NVG 245 | View on Amazon |
This table covers the Transfer Case motors. Typical signs include no motion, a squeal, or a motor that only runs on one speed. Confirm power, ground and the control module before replacing the motor.
7 Transfer Case Motor parts for the 2008 Jeep Commander come from 7 brands — DORMAN, SKP, AUTOTECNICA and 4 other brands. The "Popular" part is DORMAN 600915.
Part numbers include DORMAN 600915, SKP SK600915 and AUTOTECNICA CY0419232, among others listed above.
Transfer Case Mount
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOPAR Fits: 4.7L V8, 5.7L V8 | 52119463AB | 🇺🇸 US 🇨🇦 CA | 4 Door5 Speed Automatic 545RFE Transmission | View on Amazon |
This table covers the Transfer Case mounts. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes.
This group shows a single part: MOPAR 52119463AB.
Transfer Case Mounting Adapter Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| WJB / INMOTION PARTS Fits: 4.7L V8, 5.7L V8 | WS710655 | 🇺🇸 US 🇨🇦 CA | Fits 4WDwith New Process 245J Transfer Case | View on Amazon |
This table covers the seals at the Transfer Case Mounting Adapter. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
This group shows a single part: WJB / INMOTION PARTS WS710655.
Transfer Case Output Shaft Bearing
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| WJB / INMOTION PARTS Fits: 4.7L V8, 5.7L V8 | RB6007 | 🇺🇸 US 🇨🇦 CA | Rear4WD | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| NATIONAL Popular Fits: 4.7L V8, 5.7L V8 | 107 | 🇺🇸 US 🇨🇦 CA | Rear4WD | View on Amazon |
| SCHAEFFLER Popular Fits: 4.7L V8, 5.7L V8 | 6207 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Bearing & Race Set | View on Amazon |
| SKF Popular Fits: 4.7L V8, 5.7L V8 | 6007J | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Fits RearNew Process 140 | View on Amazon |
| BCA Fits: 4.7L V8, 5.7L V8 | NB107 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Fits Rearwith New Process 140 Transfer Case | View on Amazon |
| NATIONAL Fits: 4.7L V8, 5.7L V8 | 110 | 🇺🇸 US 🇨🇦 CA | Front4WD | View on Amazon |
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BCA Fits: 4.7L V8, 5.7L V8 | NB110 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Fits Frontwith New Process 245J Transfer Case | View on Amazon |
| SCHAEFFLER Fits: 4.7L V8, 5.7L V8 | 6010 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front1.969 In Inside Diameter X 3.15 In Outside Diameter X 0.63 In Thick | View on Amazon |
| SKF Fits: 4.7L V8, 5.7L V8 | 6010J | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front ForwardNew Process 140 or New Process 245 | View on Amazon |
| WJB / INMOTION PARTS Fits: 4.7L V8, 5.7L V8 | RB6010 | 🇺🇸 US 🇨🇦 CA | Front4WD | View on Amazon |
This table covers the Transfer Case Output Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.
10 Transfer Case Output Shaft Bearing parts for the 2008 Jeep Commander come from 5 brands — WJB / INMOTION PARTS, NATIONAL, SCHAEFFLER and 2 other brands. The "Popular" part is NATIONAL 107.
The Economy section: 1 option from WJB / INMOTION PARTS. WJB / INMOTION PARTS RB6007 is listed in this group.
Standard Replacement: 5 parts, from NATIONAL, SCHAEFFLER, SKF and 1 other brand. A representative part number is NATIONAL 107.
4 further parts sit outside the graded sections, with the same engine-level match.
Transfer Case Output Shaft Pilot Bearing
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BCA Fits: 4.7L V8, 5.7L V8 | NBJ2416 | 🇺🇸 US 🇨🇦 CA | Frontwith New Process 140 Transfer Case | View on Amazon |
| NATIONAL Fits: 4.7L V8, 5.7L V8 | J2416 | 🇺🇸 US 🇨🇦 CA | Front4WD | View on Amazon |
| WJB / INMOTION PARTS Fits: 4.7L V8, 5.7L V8 | WRSCE2416 | 🇺🇸 US 🇨🇦 CA | Front4WD | View on Amazon |
This table covers the Transfer Case Output Shaft Pilot bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.
3 Transfer Case Output Shaft Pilot Bearing parts for the 2008 Jeep Commander come from 3 brands — BCA, NATIONAL and WJB / INMOTION PARTS.
Part numbers include BCA NBJ2416, NATIONAL J2416 and WJB / INMOTION PARTS WRSCE2416.
Transfer Case Output Shaft Repair Sleeve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| NATIONAL Fits: 4.7L V8, 5.7L V8 | 99210 | 🇺🇸 US 🇨🇦 CA | Front4WD | View on Amazon |
| TIMKEN Fits: 4.7L V8, 5.7L V8 | KWK99210 | 🇺🇸 US 🇨🇦 CA | Kwik-Sleeve | View on Amazon |
| WJB / INMOTION PARTS Fits: 4.7L V8, 5.7L V8 | WS99210 | 🇺🇸 US 🇨🇦 CA | Front4WD | View on Amazon |
This table covers the wear sleeves used to restore a Transfer Case Output Shaft seal surface.
3 Transfer Case Output Shaft Repair Sleeve parts are listed for the 2008 Jeep Commander, from NATIONAL, TIMKEN and WJB / INMOTION PARTS.
Part numbers include NATIONAL 99210, TIMKEN KWK99210 and WJB / INMOTION PARTS WS99210.
Transfer Case Output Shaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| NATIONAL Popular Fits: 4.7L V8, 5.7L V8 | 710835 | 🇺🇸 US 🇨🇦 CA | Rear4WD | View on Amazon |
| NATIONAL Popular Fits: 4.7L V8, 5.7L V8 | 710694 | 🇺🇸 US 🇨🇦 CA | Fits Front4WD | View on Amazon |
| USA STANDARD GEAR Popular Fits: 4.7L V8, 5.7L V8 | ZTSEA22507TTO | 🇺🇸 US | RearNP126, NP136, NP146, NP236, NP246, NP261 & NP263 | View on Amazon |
| BCA Fits: 4.7L V8, 5.7L V8 | NS710694 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Fits Frontwith New Process 245J Transfer Case | View on Amazon |
| BCA Fits: 4.7L V8, 5.7L V8 | NS710654 | 🇺🇸 US 🇨🇦 CA | Rearwith New Process 140 Transfer Case | View on Amazon |
| NATIONAL Fits: 4.7L V8, 5.7L V8 | 710654 | 🇺🇸 US 🇨🇦 CA | Rear4WD | View on Amazon |
| SCHAEFFLER Fits: 4.7L V8, 5.7L V8 | SS6390 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front2.96" O.D. X 0.49" Width | View on Amazon |
| SKF Fits: 4.7L V8, 5.7L V8 | 18718 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Fits RearNew Process 140 | View on Amazon |
| SKF Fits: 4.7L V8, 5.7L V8 | 21257A | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | FrontNew Process 245 | View on Amazon |
| WJB / INMOTION PARTS Fits: 4.7L V8, 5.7L V8 | WS710835 | 🇺🇸 US 🇨🇦 CA | Rear4WD | View on Amazon |
| WJB / INMOTION PARTS Fits: 4.7L V8, 5.7L V8 | WS710694 | 🇺🇸 US 🇨🇦 CA | Fits Front4WD | View on Amazon |
| WJB / INMOTION PARTS Fits: 4.7L V8, 5.7L V8 | WS710654 | 🇺🇸 US 🇨🇦 CA | Rear4WD | View on Amazon |
This table covers the seals at the Transfer Case Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
12 Transfer Case Output Shaft Seal parts are listed for the 2008 Jeep Commander, from NATIONAL, WJB / INMOTION PARTS, BCA and 3 other brands. NATIONAL 710835 carries the "Popular" badge.
Transfer Case Shift Fork Insert
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| USA STANDARD GEAR Fits: 4.7L V8, 5.7L V8 | ZTNP4167969 | 🇺🇸 US | Range Shift Fork Side Insert/Pad | View on Amazon |
| USA STANDARD GEAR Fits: 4.7L V8, 5.7L V8 | ZTNP4219073 | 🇺🇸 US | Shift Fork Insert | View on Amazon |
This table covers the Transfer Case Shift Fork inserts.
2 Transfer Case Shift Fork Insert parts for the 2008 Jeep Commander come from USA STANDARD GEAR.
This group includes USA STANDARD GEAR ZTNP4167969 and USA STANDARD GEAR ZTNP4219073.
Transfer Case Sprocket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOPAR Fits: 4.7L V8, 5.7L V8 | 5143727AA | 🇺🇸 US 🇨🇦 CA | Fits Quadra-Trac I Full-Time 4WD4 Door | View on Amazon |
| MOPAR Fits: 4.7L V8, 5.7L V8 | 5143730AA | 🇺🇸 US 🇨🇦 CA | Fits Quadra-Trac I Full-Time 4WD4 Door | View on Amazon |
This table covers the Transfer Case sprockets.
2 Transfer Case Sprocket parts for the 2008 Jeep Commander come from MOPAR.
Part numbers include MOPAR 5143727AA and MOPAR 5143730AA.
Transfer Case Vent
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOPAR Fits: 4.7L V8, 5.7L V8 | 68001633AB | 🇺🇸 US 🇨🇦 CA | Fits Quadra-Trac I Full-Time 4WD4 Door | View on Amazon |
This table covers the vents on the transfer case.
This group shows a single part: MOPAR 68001633AB.
Buying Drivetrain Parts for a 2008 Jeep Commander
On this vehicle, the drivetrain system moves power from transmission to wheels through axles, CV joints, driveshafts, differentials and wheel-end hardware.
- Match the engine first. Some drivetrain parts fit every engine; others are engine-specific. Each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the differential or transfer-case fluid with any axle or seal job while everything is already open.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Differential Pinion Bearing / Race and Differential Rebuild Kit .
Frequently Asked Questions
How many drivetrain parts fit the 2008 Jeep Commander?
Our catalog currently lists 356 drivetrain parts for the 2008 Jeep Commander across 55 subcategories and 37 brands, covering all 3 engine options (3.7L V6, 4.7L V8 and 5.7L V8). Each part is matched to the engine(s) it fits.
Do drivetrain parts differ between 2008 Jeep Commander engines?
Some do. 62 parts fit every engine; the other 294 are engine-specific. Each row (and the filter at the top) shows which. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of drivetrain problems on a 2008 Jeep Commander?
Common symptoms include clicking in tight turns, a clunk when shifting between drive and reverse, vibration that builds with speed, or gear oil on the inside of a wheel. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the differential or transfer-case fluid with any axle or seal job while everything is already open.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2008 Jeep Commander was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2008 Jeep Commander?
First match the engine — each row shows which engine(s) the part fits. Then a torn CV boot caught early is a cheap boot kit; caught late it is a whole axle — inspect before deciding which to buy. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2008 Jeep Commander
Drivetrain Parts for Other Jeep Commander Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.