2008 Jeep Commander Electrical Connector Parts

This table covers the harness connectors at the 4WD Disconnect. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2008 Jeep Commander — STANDARD MOTOR PRODUCTS S2402.

This table covers the harness connectors at the A/C Compressor Clutch Coil. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: WELLS 1P1711.

This table covers the harness connectors at the A/C Compressor Relay. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

STANDARD MOTOR PRODUCTS supplies both parts for the 2008 Jeep Commander.

Listed part numbers: STANDARD MOTOR PRODUCTS HP3810 and STANDARD MOTOR PRODUCTS S654.

This table covers the harness connectors at the A/C Refrigerant Pressure Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 A/C Refrigerant Pressure Switch Connector parts are listed for the 2008 Jeep Commander, from FOUR SEASONS and GPD.

This group includes FOUR SEASONS 20954 and GPD 1711515.

This table covers the harness connectors at each ABS wheel-speed sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 ABS Wheel Speed Sensor Connector parts for the 2008 Jeep Commander come from 2 brands — STANDARD MOTOR PRODUCTS and WELLS.

Listed part numbers: STANDARD MOTOR PRODUCTS S2346 and WELLS 1P2545.

This table covers the harness connectors at the Accelerator Pedal Position Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

4 Accelerator Pedal Position Sensor Connector parts for the 2008 Jeep Commander come from 3 brands — STANDARD MOTOR PRODUCTS, ROSTRA and WELLS.

Part numbers include ROSTRA 610494, STANDARD MOTOR PRODUCTS S1478 and STANDARD MOTOR PRODUCTS S2082, among others listed above.

This table covers the Adapter plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

This group shows a single part: MOPAR 68021352AA.

This table covers the harness connectors at the Air Bag Clockspring. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2008 Jeep Commander — STANDARD MOTOR PRODUCTS S2468.

This table covers the harness connectors at the Air Bag. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: WELLS 1P3334.

This table covers the harness connectors at the Air Intake / Charge Temperature Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

5 Air Intake / Charge Temperature Sensor Connector parts are listed for the 2008 Jeep Commander, from STANDARD MOTOR PRODUCTS, WELLS, ROSTRA and 1 other brand. WELLS 1P1694 carries the "Popular" badge.

This group includes WELLS 1P1694, ROSTRA 610372 and STANDARD MOTOR PRODUCTS HP4665 and the remaining parts above.

This table covers the harness connectors at the Alternator / Generator. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

6 Alternator / Generator Connector parts for the 2008 Jeep Commander come from 5 brands — STANDARD MOTOR PRODUCTS, WELLS, HOLSTEIN and 2 other brands. The "Popular" part is STANDARD MOTOR PRODUCTS HP4347.

This group includes STANDARD MOTOR PRODUCTS HP4347, WELLS 1P2047 and HOLSTEIN 2HAR0035 and the remaining parts above.

This table covers the harness connectors at the Ambient Air Temperature Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

7 Ambient Air Temperature Sensor Connector parts for the 2008 Jeep Commander come from 6 brands — STANDARD MOTOR PRODUCTS, WALKER PRODUCTS, WELLS and 3 other brands. The "Popular" part is WALKER PRODUCTS 2701055.

This group includes WALKER PRODUCTS 2701055, WELLS 1P1311 and FOUR SEASONS 70013 and the remaining parts above.

This table covers the connectors at the blower resistor or control module. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

30 Blower Motor Control Module / Resistor Connector parts are listed for the 2008 Jeep Commander, from STANDARD MOTOR PRODUCTS, FOUR SEASONS, WELLS and 7 other brands. GPD 1712894 carries the "Popular" badge. The notes list position, dimensions and spec qualifiers wherever the manufacturer distinguishes between variants.

This table covers the body-harness connectors and pigtails. Typical signs include an intermittent fault that moves when you wiggle the harness, or a melted or corroded plug. Match terminal count and keyway. Repair with heat-shrink terminals, not twist-and-tape. Read more

One part is listed for the 2008 Jeep Commander — STANDARD MOTOR PRODUCTS S1960.

This table covers the harness connectors at the Brake Fluid Level Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

5 Brake Fluid Level Sensor Connector parts are listed for the 2008 Jeep Commander, from STANDARD MOTOR PRODUCTS, WELLS, ROSTRA and 1 other brand. WELLS 1P1694 carries the "Popular" badge.

Part numbers include WELLS 1P1694, ROSTRA 610372 and STANDARD MOTOR PRODUCTS HP4665, among others listed above.

This table covers the harness connectors at the Brake Light Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Brake Light Switch Connector parts are listed for the 2008 Jeep Commander, from STANDARD MOTOR PRODUCTS and WELLS.

Listed part numbers: STANDARD MOTOR PRODUCTS S3095 and WELLS 1P2378.

This table covers the harness connectors at the Camshaft Position Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

6 Camshaft Position Sensor Connector parts for the 2008 Jeep Commander come from 6 brands — STANDARD MOTOR PRODUCTS, WALKER PRODUCTS, HOLSTEIN and 3 other brands. The "Popular" part is STANDARD MOTOR PRODUCTS S2316.

This group includes STANDARD MOTOR PRODUCTS S2316, WALKER PRODUCTS 2701145 and HOLSTEIN 2HAR0060 and the remaining parts above.

This table covers the harness connectors at the Crankshaft Position Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Crankshaft Position Sensor Connector parts for the 2008 Jeep Commander come from 2 brands — STANDARD MOTOR PRODUCTS and WALKER PRODUCTS.

Part numbers include STANDARD MOTOR PRODUCTS S2116 and WALKER PRODUCTS 2701065.

This table covers the harness connectors at the Deck Lid / Liftgate Ajar Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

4 Deck Lid / Liftgate Ajar Switch Connector parts are listed for the 2008 Jeep Commander, from STANDARD MOTOR PRODUCTS, UNITED MOTOR PRODUCTS and WELLS.

Part numbers include STANDARD MOTOR PRODUCTS HP4665, STANDARD MOTOR PRODUCTS S2034 and UNITED MOTOR PRODUCTS CON57, among others listed above.

This table covers the harness connectors at the Door Lock Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2008 Jeep Commander — STANDARD MOTOR PRODUCTS S1600.

This table covers the wiring-harness connectors at the Door. Typical signs include an intermittent fault that moves when you wiggle the harness, or a melted or corroded plug. Match terminal count and keyway. Repair with heat-shrink terminals, not twist-and-tape. Read more

One part is listed for the 2008 Jeep Commander — MOPAR 56050288AF.

This table covers the harness connectors at the EGR Valve. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 EGR Valve Connector parts for the 2008 Jeep Commander come from 2 brands — UNITED MOTOR PRODUCTS and WELLS.

Part numbers include UNITED MOTOR PRODUCTS CON50 and WELLS 1P1645.

This table covers the harness connectors at the Engine Block Heater. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: MOPAR 4608805AD.

This table covers the harness connectors at the Fog / Driving Lamp Relay. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2008 Jeep Commander — STANDARD MOTOR PRODUCTS S1600.

This table covers the harness connectors at the Fuel Injector. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

8 Fuel Injector Connector parts for the 2008 Jeep Commander come from 7 brands — STANDARD MOTOR PRODUCTS, WELLS, ACDELCO and 4 other brands. The "Popular" part is STANDARD MOTOR PRODUCTS HP3945.

Part numbers include STANDARD MOTOR PRODUCTS HP3945, WELLS 1P1344 and ACDELCO PT2160, among others listed above.

This table covers the harness connectors at the Fuel Pump / Circuit Opening Relay. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 Fuel Pump / Circuit Opening Relay Connector parts are listed for the 2008 Jeep Commander, from STANDARD MOTOR PRODUCTS, UNITED MOTOR PRODUCTS and WELLS.

This group includes STANDARD MOTOR PRODUCTS S1600, UNITED MOTOR PRODUCTS CON30 and WELLS 1P4004.

This table covers the harness connectors at the Fuel Sending Unit. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S1410.

This table covers the harness connectors at the Glove Box Lamp. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: WELLS 1P3331.

This table covers the wiring-harness connectors at the Headlamp. Typical signs include an intermittent fault that moves when you wiggle the harness, or a melted or corroded plug. Match terminal count and keyway. Repair with heat-shrink terminals, not twist-and-tape. Read more

STANDARD MOTOR PRODUCTS supplies the 4 Headlamp Wiring Harness / Connector parts for the 2008 Jeep Commander.

Listed part numbers: STANDARD MOTOR PRODUCTS F90008, STANDARD MOTOR PRODUCTS F90009 and STANDARD MOTOR PRODUCTS LWH106, plus the other parts above.

This table covers the harness connectors at the Heated Window Element. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2008 Jeep Commander — WELLS 1P2226.

This table covers the harness connectors at the Hood Ajar Indicator Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2008 Jeep Commander — WELLS 1P3330.

This table covers the harness connectors at the Horn. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2008 Jeep Commander — WELLS 1P1580.

This table covers the harness connectors at the Horn Relay. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Horn Relay Connector parts for the 2008 Jeep Commander come from 2 brands — STANDARD MOTOR PRODUCTS and UNITED MOTOR PRODUCTS.

Part numbers include STANDARD MOTOR PRODUCTS S1600 and UNITED MOTOR PRODUCTS CON30.

This table covers the harness connectors at the HVAC Control Switch / Panel. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: ULTRA-POWER 2701055.

This table covers the harness connectors at the HVAC Relay. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 HVAC Relay Connector parts are listed for the 2008 Jeep Commander, from STANDARD MOTOR PRODUCTS and UNITED MOTOR PRODUCTS.

Part numbers include STANDARD MOTOR PRODUCTS S1600 and UNITED MOTOR PRODUCTS CON30.

This table covers the harness connectors at the Ignition Coil. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

4 Ignition Coil Connector parts for the 2008 Jeep Commander come from 4 brands — ROSTRA, STANDARD MOTOR PRODUCTS, UNITED MOTOR PRODUCTS and 1 other brand.

Listed part numbers: ROSTRA 610156, STANDARD MOTOR PRODUCTS S2087 and UNITED MOTOR PRODUCTS CON60, plus the other parts above.

This table covers the harness connectors at the Ignition Starter Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

5 Ignition Starter Switch Connector parts for the 2008 Jeep Commander come from 4 brands — STANDARD MOTOR PRODUCTS, BWD/NIEHOFF, HOLSTEIN and 1 other brand. The "Popular" part is STANDARD MOTOR PRODUCTS S1768.

Listed part numbers: STANDARD MOTOR PRODUCTS S1768, BWD/NIEHOFF PT1267 and HOLSTEIN 2HAR0013, plus the other parts above.

This table covers the harness connectors at the Impact / Crash Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: WELLS 1P3334.

This table covers the harness connectors at the Knock / Detonation Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: WELLS 1P1819.

This table covers the harness connectors at the Liftgate Window Release Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2008 Jeep Commander — STANDARD MOTOR PRODUCTS S2468.

This table covers the harness connectors at the Manifold Pressure (MAP) Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

5 Manifold Pressure (MAP) Sensor Connector parts for the 2008 Jeep Commander come from 5 brands — STANDARD MOTOR PRODUCTS, ROSTRA, ULTRA-POWER and 2 other brands. The "Popular" part is STANDARD MOTOR PRODUCTS S2816.

Listed part numbers: STANDARD MOTOR PRODUCTS S2816, ROSTRA 610107 and ULTRA-POWER 2701095, plus the other parts above.

This table covers the harness connectors at the Oil Pressure Sender / Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

9 Oil Pressure Sender / Switch Connector parts are listed for the 2008 Jeep Commander, from STANDARD MOTOR PRODUCTS, WELLS, HOLSTEIN and 3 other brands. STANDARD MOTOR PRODUCTS HP3925 carries the "Popular" badge.

This group includes STANDARD MOTOR PRODUCTS HP3925, WELLS 1P1711 and HOLSTEIN 2HAR0054 and the remaining parts above.

This table covers the harness connectors at the Oil Temperature Sender. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2008 Jeep Commander — WELLS 1P2227.

This table covers the harness connectors at the On-Board Diagnostic (OBD) Port. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: WELLS 1P1474.