The 1970 Jensen Interceptor has 73 engine parts with verified fitment on this page — 24 part types and 14 brands, covering the 6.3L V8 engine. Each part includes a manufacturer part number and application notes.
On the 1970 Jensen Interceptor, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. Most of the listed parts are Valve Cover Gasket (7 parts), Connecting Rod Bearing (6 parts) and Crankshaft Seal (6 parts). The other 21 part types cover the remaining 54 parts.
Every part on this page is matched to the 6.3L V8 — the only engine offered in the 1970 Jensen Interceptor.
The most listed brands for 1970 Jensen Interceptor engine parts are MAHLE / CLEVITE (18 parts), VICTOR REINZ (14 parts) and FEL-PRO (13 parts), plus 11 more brands. Quality grades include High Performance, Standard Replacement and Economy.
9 parts on this 1970 Jensen Interceptor page carry a "Popular" badge — the source catalog's flag for options frequently chosen for this vehicle — including KING ENGINE BEARINGS CR806HPND (Connecting Rod Bearing) and FEL-PRO BS40240 (Crankshaft Seal). Click any part number to see every vehicle that part fits.
Bolt Kit
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ARP | 5459701 | 🇺🇸 US 🇨🇦 CA | 12 Point Bolt Head | View on Amazon |
This table covers the Bolt kits.
This group shows a single part: ARP 5459701.
Connecting Rod Bearing
High Performance
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| KING ENGINE BEARINGS Popular | CR806HPND | 🇺🇸 US | alecularSet | View on Amazon |
| KING ENGINE BEARINGS | CR806HPNDX | 🇺🇸 US | alecularSet | View on Amazon |
| KING ENGINE BEARINGS | CR806XPND | 🇺🇸 US | PmaxblackSet | View on Amazon |
| KING ENGINE BEARINGS | CR806XPNDX | 🇺🇸 US | PmaxblackSet | View on Amazon |
| KING ENGINE BEARINGS | CR806XPNDCX | 🇺🇸 US | pmaxkote, polymer coatedSet | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| KING ENGINE BEARINGS Popular | CR806AM | 🇺🇸 US | BI-Metal (aluminum base)Set | View on Amazon |
This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.
6 Connecting Rod Bearing parts for the 1970 Jensen Interceptor come from KING ENGINE BEARINGS. The "Popular" part is KING ENGINE BEARINGS CR806HPND.
The High Performance section lists 5 options from KING ENGINE BEARINGS — engineered beyond original-equipment specification. KING ENGINE BEARINGS CR806HPND is listed in this group.
In the Standard Replacement grade, KING ENGINE BEARINGS supplies 1 part: built to original-equipment specification. A representative part number is KING ENGINE BEARINGS CR806AM.
Listed part numbers: KING ENGINE BEARINGS CR806HPND, KING ENGINE BEARINGS CR806HPNDX and KING ENGINE BEARINGS CR806XPND, plus the other parts above.
Crankshaft Main Bearing
High Performance
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| KING ENGINE BEARINGS | MB555HP | 🇺🇸 US | alecularSet | View on Amazon |
| KING ENGINE BEARINGS | MB555HPX | 🇺🇸 US | alecularSet | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| KING ENGINE BEARINGS | MB555AM | 🇺🇸 US | BI-Metal (aluminum base)Set | View on Amazon |
This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.
KING ENGINE BEARINGS supplies the 3 Crankshaft Main Bearing parts for the 1970 Jensen Interceptor.
High Performance: 2 parts, from KING ENGINE BEARINGS. A representative part number is KING ENGINE BEARINGS MB555HP.
The Standard Replacement section: 1 option from KING ENGINE BEARINGS. KING ENGINE BEARINGS MB555AM is listed in this group.
This group includes KING ENGINE BEARINGS MB555HP, KING ENGINE BEARINGS MB555HPX and KING ENGINE BEARINGS MB555AM.
Crankshaft Repair Sleeve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| NATIONAL | 99218 | 🇺🇸 US 🇨🇦 CA | Front | View on Amazon |
| WJB / INMOTION PARTS | WS99218 | 🇺🇸 US 🇨🇦 CA | Front | View on Amazon |
This table covers the sleeves used to restore a grooved crankshaft seal surface.
2 Crankshaft Repair Sleeve parts are listed for the 1970 Jensen Interceptor, from NATIONAL and WJB / INMOTION PARTS.
This group includes NATIONAL 99218 and WJB / INMOTION PARTS WS99218.
Crankshaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Popular | BS40240 | 🇺🇸 US 🇨🇦 CA | Rubber | View on Amazon |
| NATIONAL Popular | 3103 | 🇺🇸 US | Front | View on Amazon |
| BCA | NS3103 | 🇺🇸 US 🇨🇦 CA | Front | View on Amazon |
| MAHLE / CLEVITE | JV604 | 🇺🇸 US 🇨🇦 CA | SetMolded Rubber | View on Amazon |
| SCHAEFFLER | SS3145 | 🇺🇸 US 🇨🇦 CA | Front | View on Amazon |
| WJB / INMOTION PARTS | WS3103 | 🇺🇸 US | Front | View on Amazon |
This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
6 Crankshaft Seal parts are listed for the 1970 Jensen Interceptor, from FEL-PRO, NATIONAL, BCA and 3 other brands. FEL-PRO BS40240 carries the "Popular" badge.
Part numbers include FEL-PRO BS40240, NATIONAL 3103 and BCA NS3103, among others listed above.
Cylinder Head Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ARP | 1453606 | 🇺🇸 US 🇨🇦 CA | SetHex Bolt Head | View on Amazon |
| ARP | 4453706 | 🇺🇸 US 🇨🇦 CA | Set12 Point Bolt Head | View on Amazon |
This table covers the bolts that clamp the cylinder head to the block.
2 Cylinder Head Bolt parts for the 1970 Jensen Interceptor come from ARP.
Listed part numbers: ARP 1453606 and ARP 4453706.
Cylinder Head Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO | 8519PT1 | 🇺🇸 US 🇨🇦 CA | Permatorque | View on Amazon |
| MAHLE / CLEVITE | 3464VC | 🇺🇸 US 🇨🇦 CA | Graphite | View on Amazon |
| VICTOR REINZ | 611033200 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
3 Cylinder Head Gasket parts for the 1970 Jensen Interceptor come from 3 brands — FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.
Part numbers include FEL-PRO 8519PT1, MAHLE / CLEVITE 3464VC and VICTOR REINZ 611033200.
Cylinder Head Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO | HS7891PT11 | 🇺🇸 US 🇨🇦 CA | Exhaust Manifold Gasket(s) Not IncludedIncludes Valve Stem Seals | View on Amazon |
| MAHLE / CLEVITE | HS3464VC | 🇺🇸 US 🇨🇦 CA | Includes Valve Stem Seals | View on Amazon |
| VICTOR REINZ | 021032301 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
3 Cylinder Head Gasket Set parts for the 1970 Jensen Interceptor come from 3 brands — FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.
Listed part numbers: FEL-PRO HS7891PT11, MAHLE / CLEVITE HS3464VC and VICTOR REINZ 021032301.
Cylinder Head Spacer Shim
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE | 55153 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| VICTOR REINZ | 711638300 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the Cylinder Head Spacer shims.
2 Cylinder Head Spacer Shim parts for the 1970 Jensen Interceptor come from 2 brands — MAHLE / CLEVITE and VICTOR REINZ.
Listed part numbers: MAHLE / CLEVITE 55153 and VICTOR REINZ 711638300.
Engine Kit Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINE PRO | 311010MLS | 🇺🇸 US | 383, 400, 426 Wedge, 440 Engines | View on Amazon |
| FEL-PRO | FS7891PT11 | 🇺🇸 US 🇨🇦 CA | Overhaul SetDoes Not Include Intake Manifold Gaskets | View on Amazon |
| MAHLE / CLEVITE | 953344 | 🇺🇸 US | Full Gasket Set | View on Amazon |
| VICTOR REINZ | 011002401 | 🇺🇸 US 🇨🇦 CA | Gasket Set | View on Amazon |
This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
4 Engine Kit Gasket Set parts for the 1970 Jensen Interceptor come from 4 brands — ENGINE PRO, FEL-PRO, MAHLE / CLEVITE and 1 other brand.
Part numbers include ENGINE PRO 311010MLS, FEL-PRO FS7891PT11 and MAHLE / CLEVITE 953344, among others listed above.
Harmonic Balancer Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ARP | 2402501 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the Harmonic Balancer bolts.
One part is listed for the 1970 Jensen Interceptor — ARP 2402501.
Intake Manifold Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ARP | 1442001 | 🇺🇸 US 🇨🇦 CA | Hex Bolt Head | View on Amazon |
This table covers the Intake Manifold bolts.
This group shows a single part: ARP 1442001.
Intake Manifold Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Popular | MS90175 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| FEL-PRO | MS96007 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| MAHLE / CLEVITE | MS15924 | 🇺🇸 US 🇨🇦 CA | Beaded Steel | View on Amazon |
| VICTOR REINZ | 111000501 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| VICTOR REINZ | 101004301 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
5 Intake Manifold Gasket parts for the 1970 Jensen Interceptor come from 3 brands — FEL-PRO, VICTOR REINZ and MAHLE / CLEVITE. The "Popular" part is FEL-PRO MS90175.
This group includes FEL-PRO MS90175, FEL-PRO MS96007 and MAHLE / CLEVITE MS15924 and the remaining parts above.
Oil Drain Plug Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO | 70822 | 🇺🇸 US 🇨🇦 CA | 0.500 (in) Inside Diameter x 0.900 (in) Outside DiameterFlat Washer | View on Amazon |
| MAHLE / CLEVITE | 2051 | 🇺🇸 US 🇨🇦 CA | Composite | View on Amazon |
| VICTOR REINZ | 711346200 | 🇺🇸 US 🇨🇦 CA | 0.500 IN Inside Diameter | View on Amazon |
This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
3 Oil Drain Plug Gasket parts for the 1970 Jensen Interceptor come from 3 brands — FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.
Listed part numbers: FEL-PRO 70822, MAHLE / CLEVITE 2051 and VICTOR REINZ 711346200.
Oil Filter
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FRAM | FE8A | 🇺🇸 US 🇨🇦 CA | Spin-OnTough Guard or Synthetic Endurance | View on Amazon |
| VARIOUS MFR | PG1A | 🇺🇸 US 🇨🇦 CA | Spin-On | View on Amazon |
High Performance / Heavy Duty
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FRAM | TG8A | 🇺🇸 US 🇨🇦 CA | Tough GuardUse if Spin-On Kit was Installed | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FRAM Popular | PH8A | 🇺🇸 US 🇨🇦 CA | Extra GuardUse if Spin-On Kit was Installed | View on Amazon |
| WIX | 51092 | 🇺🇸 US 🇨🇦 CA | FF Model | View on Amazon |
This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive.
5 Oil Filter parts are listed for the 1970 Jensen Interceptor, from FRAM, VARIOUS MFR and WIX. FRAM PH8A carries the "Popular" badge.
In the Economy grade, FRAM and VARIOUS MFR supply 2 parts: the catalog's value-priced group. A representative part number is FRAM FE8A.
In the High Performance / Heavy Duty grade, FRAM supplies 1 part: grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. A representative part number is FRAM TG8A.
The Standard Replacement section: 2 options from FRAM and WIX. FRAM PH8A is listed in this group.
Part numbers include FRAM PH8A, FRAM FE8A and VARIOUS MFR PG1A, among others listed above.
Oil Pan Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Popular | OS11729C1 | 🇺🇸 US 🇨🇦 CA | High Performance engine with Windage tray requires 2 Oil Pan sets1 Piece Design | View on Amazon |
| ENGINE PRO | 317345WT | 🇺🇸 US | Stroker Crankshafts up To 4.150 Inch Stroke | View on Amazon |
| MAHLE / CLEVITE | OS31416 | 🇺🇸 US 🇨🇦 CA | Cork-RubberOil Pan Gasket Material: Cork-Rubber | View on Amazon |
| MAHLE / CLEVITE | OS31416TC | 🇺🇸 US 🇨🇦 CA | Cork with Metal Carrier | View on Amazon |
| VICTOR REINZ | 101018801 | 🇺🇸 US 🇨🇦 CA | Cork Rubber | View on Amazon |
This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
5 Oil Pan Gasket parts are listed for the 1970 Jensen Interceptor, from MAHLE / CLEVITE, FEL-PRO, ENGINE PRO and 1 other brand. FEL-PRO OS11729C1 carries the "Popular" badge.
This group includes FEL-PRO OS11729C1, ENGINE PRO 317345WT and MAHLE / CLEVITE OS31416 and the remaining parts above.
Oil Pressure Relief Valve Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO | 3122 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| VICTOR REINZ | 711456300 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the gaskets that seal the Oil Pressure Relief Valve. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
2 Oil Pressure Relief Valve Gasket parts for the 1970 Jensen Interceptor come from 2 brands — FEL-PRO and VICTOR REINZ.
Part numbers include FEL-PRO 3122 and VICTOR REINZ 711456300.
Oil Pump Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE | B45558 | 🇺🇸 US 🇨🇦 CA | Molded Rubber | View on Amazon |
This table covers the gaskets that seal the Oil Pump. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
This group shows a single part: MAHLE / CLEVITE B45558.
Piston Ring
Premium
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE | 40203CP | 🇺🇸 US 🇨🇦 CA | PremiumMaterial Cast Iron / Cast Iron / Stainless Steel | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE | 50203CP | 🇺🇸 US 🇨🇦 CA | SetChrome Facing | View on Amazon |
This table covers the rings that seal each piston to the cylinder wall.
2 Piston Ring parts for the 1970 Jensen Interceptor come from MAHLE / CLEVITE.
In the Premium grade, MAHLE / CLEVITE supplies 1 part: a step above OE specification in materials, tolerances or warranty terms. A representative part number is MAHLE / CLEVITE 40203CP.
Standard Replacement: 1 part, from MAHLE / CLEVITE. A representative part number is MAHLE / CLEVITE 50203CP.
Listed part numbers: MAHLE / CLEVITE 40203CP and MAHLE / CLEVITE 50203CP.
Timing Cover Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO | TCS124602 | 🇺🇸 US 🇨🇦 CA | Water Pump Gasket Included | View on Amazon |
| MAHLE / CLEVITE | T18750 | 🇺🇸 US 🇨🇦 CA | Paper | View on Amazon |
| MAHLE / CLEVITE | JV834 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| VICTOR REINZ | 151025001 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
4 Timing Cover Gasket parts are listed for the 1970 Jensen Interceptor, from MAHLE / CLEVITE, FEL-PRO and VICTOR REINZ.
This group includes FEL-PRO TCS124602, MAHLE / CLEVITE T18750 and MAHLE / CLEVITE JV834 and the remaining parts above.
Timing Cover Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE | 64573 | 🇺🇸 US 🇨🇦 CA | Rubber | View on Amazon |
This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
One part is listed for the 1970 Jensen Interceptor — MAHLE / CLEVITE 64573.
Valve Cover Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Popular | VS13379 | 🇺🇸 US 🇨🇦 CA | Cork | View on Amazon |
| FEL-PRO Popular | VS50145R | 🇺🇸 US 🇨🇦 CA | High Temperature DesignRubber Coated Fiber | View on Amazon |
| MAHLE / CLEVITE | VS38322 | 🇺🇸 US 🇨🇦 CA | Cork-RubberSet | View on Amazon |
| MAHLE / CLEVITE | VS38322H | 🇺🇸 US 🇨🇦 CA | SetHigh Temperature Cork-Rubber | View on Amazon |
| VICTOR REINZ | 151052101 | 🇺🇸 US 🇨🇦 CA | Improved DesignSet | View on Amazon |
| VICTOR REINZ | 151059201 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| VICTOR REINZ | 151052201 | 🇺🇸 US 🇨🇦 CA | SetHigh Temperature Design | View on Amazon |
This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
7 Valve Cover Gasket parts are listed for the 1970 Jensen Interceptor, from VICTOR REINZ, FEL-PRO and MAHLE / CLEVITE. FEL-PRO VS13379 carries the "Popular" badge.
Listed part numbers: FEL-PRO VS13379, FEL-PRO VS50145R and MAHLE / CLEVITE VS38322, plus the other parts above.
Valve Seat
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DURA-BOND | 30682 | 🇺🇸 US | Exhaust | View on Amazon |
This table covers the Valve seats.
This group shows a single part: DURA-BOND 30682.
Valve Stem Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO | SS12419 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| MAHLE / CLEVITE | SS45343 | 🇺🇸 US 🇨🇦 CA | SetMolded Rubber | View on Amazon |
| VICTOR REINZ | 121007001 | 🇺🇸 US 🇨🇦 CA | SetContains 8 Pieces | View on Amazon |
This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
3 Valve Stem Seal parts are listed for the 1970 Jensen Interceptor, from FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.
Part numbers include FEL-PRO SS12419, MAHLE / CLEVITE SS45343 and VICTOR REINZ 121007001.
Buying Engine Parts for a 1970 Jensen Interceptor
On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.
- Confirm you have the 6.3L V8 engine — every part on this page is matched to it.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Valve Cover Gasket and Connecting Rod Bearing .
Frequently Asked Questions
How many engine parts fit the 1970 Jensen Interceptor?
Our catalog currently lists 73 engine parts for the 1970 Jensen Interceptor across 24 subcategories and 14 brands, covering the 6.3L V8 engine. Each part is matched to the engine(s) it fits.
What are the signs of engine problems on a 1970 Jensen Interceptor?
Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1970 Jensen Interceptor was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 1970 Jensen Interceptor?
Every part on this page is matched to the 6.3L V8 engine. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 1970 Jensen Interceptor
Engine Parts for Other Jensen Interceptor Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.